Collision Regulations

6 (1) Each light, shape, sound-signalling appliance and radar reflector required by these Regulations to be carried or exhibited on a vessel shall meet the standards set out in Schedule 1 and its annexes.

(2) If a proof of compliance is issued in Canada in respect of a light, shape or sound-signalling appliance, the light, shape or sound-signalling appliance shall also meet one of the following standards:

• (a) Standards for Navigation Lights, Shapes, Sound-Signalling Appliances, TP 1861, published by Transport Canada, as amended from time to time;

• (b) Underwriters Laboratories, Inc. Standard 1104, Marine Navigation Lights, as amended from time to time, except sections 1.1, 1.2, 5.2 and 38.2 and any reference in that Standard to the United States’ regulation entitled Inland Navigation Rules;

• (c) in the case of a light on a vessel that is of less than 20 metres in length, American Boat and Yacht Council Standard A-16, Electric Navigation Lights, as amended from time to time, except section 16.5 and any reference in that Standard to the United States’ regulation entitled Inland Navigation Rules; or

• (d) any other testing standard that the Minister determines provides a level of safety that is equivalent to or higher than that of those standards.

(3) Lights carried on a vessel that is not required to be inspected annually or every fourth year under the Canada Shipping Act as it read immediately before the coming into force of the Act need not comply with these Regulations if the lights were constructed and installed in accordance with the Collision Regulations as they read on July 31, 1974, or the Small Vessel Regulations as they read on May 31, 1984, before

• (a) July 15, 1981, in the case of a vessel of 20 metres or more in length; or

• (b) June 1, 1984, in the case of a vessel of less than 20 metres in length.