Version of document from 2019-04-15 to 2019-06-24:
United States Surtax Remission Order
SOR/2018-205
Registration 2018-10-11
United States Surtax Remission Order
Her Excellency the Governor General in Council, on the recommendation of the Minister of Finance, pursuant to section 115Footnote a of the Customs TariffFootnote b, makes the annexed United States Surtax Remission Order.
Return to footnote aS.C. 2005, c. 38, par. 145(2)(j)
Return to footnote bS.C. 1997, c. 36
Remission
Steel and Aluminum
Marginal note:Remission
1 (1) Subject to subsection (2), remission is granted of surtaxes paid or payable under the United States Surtax Order (Steel and Aluminum) in respect of the goods referred to in Schedules 1, 2 or 3.
Marginal note:Conditions
(2) Remission referred to in subsection (1) is granted on the following conditions:
(a) in the case of a good referred to in Schedule 1, it is imported into Canada on or after July 1, 2018;
(b) in the case of a good referred to in Schedule 2, it is imported into Canada during the period beginning on July 1, 2018 and ending on April 30, 2019;
(c) in the case of a good referred to in column 2 of Schedule 3, it is imported into Canada by an importer listed in column 1 during the period specified in column 3, and subject to any other applicable condition listed in column 4;
(d) no other claim for relief of the surtax has been granted under the Customs Tariff in respect of the good; and
(e) the importer makes a claim for remission to the Minister of Public Safety and Emergency Preparedness within two years after the date of importation.
- SOR/2018-289, s. 1
Other Goods
Marginal note:Remission
2 (1) Subject to subsection (2), remission is granted of surtaxes paid or payable under the United States Surtax Order (Other Goods) in respect of goods referred to in Schedule 4.
Marginal note:Conditions
(2) Remission referred to in subsection (1) is granted on the following conditions:
(a) the good is imported into Canada on or after July 1, 2018;
(b) in the case of goods classified under tariff item No. 8903.10.00, 8903.91.00, 8903.92.00 or 8903.99.90 in the List of Tariff Provisions set out in the schedule to the Customs Tariff,
(i) the good was purchased and sold under contract by the importer before May 31, 2018, and
(ii) the good has not been exported from Canada and subsequently re-imported into Canada;
(c) no other claim for relief of the surtax has been granted under the Customs Tariff in respect of the good; and
(d) the importer makes a claim for remission to the Minister of Public Safety and Emergency Preparedness within two years after the date of importation.
- SOR/2018-289, s. 2
Goods Temporarily Imported into Canada
Marginal note:Remission
3 (1) Subject to subsection (2), remission is granted of surtaxes paid or payable under the United States Surtax Order (Steel and Aluminum) and United States Surtax Order (Other Goods) in respect of goods temporarily imported into Canada for the purpose of repair, alteration or storage.
Marginal note:Conditions
(2) Remission referred to in subsection (1) is granted on the following conditions:
(a) the good is exported immediately after having been repaired, altered or removed from storage, whichever occurs last, but no later than 12 months after the date on which the imported good was released;
(b) no other claim for relief of the surtax has been granted under the Customs Tariff in respect of the good; and
(c) the importer makes a claim for remission to the Minister of Public Safety and Emergency Preparedness within two years after the date of importation.
Marginal note:Definitions
(3) The following definitions apply in this section.
- alteration
alteration in relation to a good, does not include an operation or process that
(a) destroys the essential characteristics of the good;
(b) creates a new or commercially different good; and
(c) in the case of an unfinished good, is part of the production or assembly of the good into a finished good. (modification)
- repair
repair in relation to a good, means the restoration of a good or its components to good operating condition, including renovation, re-dyeing, cleaning and re-sterilizing, but does not include an operation or process that either destroys the essential characteristics of a good or creates a new or commercially different good. (réparation)
Coming into Force
Marginal note:Registration
4 This Order comes into force on the day on which it is registered.
SCHEDULE 1(Subsection 1(1) and paragraph 1(2)(a))
| Column 1 | |
|---|---|
| Item | Description of Goods |
| 1 | Semi-finished product of cold-rolled annealed spring steel of grade SAE 1095 |
| 2 | Flat-rolled product, of a width of 600 mm or more, not further worked than hot-rolled, pickled, of grade ASTM A1039 (500LA), of a nominal thickness of 0.039 inch |
| 3 | Flat-rolled product of grade HPS 70 W |
| 4 | Flat-rolled product for production of large diameter line pipe of grade X65 or X70 (API 5L) |
| 5 | Flat-rolled product, not further worked than cold-rolled, in coils, of Martensitic grades |
| 6 | Flat-rolled product, batch annealed tin plate |
| 7 | Flat-rolled product of iron, non-alloy or other alloy steel, electrogalvanized |
| 8 | Flat-rolled product, galvanized, of grade TRIP TRC400Y/690T, of a width of 600 mm or more, of a thickness of 0.057 inch or more |
| 9 | Flat-rolled product, galvannealed, of grade ASTM A653/HSLA 050XK, of a width of 70 inches |
| 10 | Flat-rolled product, with aluminized coating, of a thickness not exceeding 2.8 mm, of a width not exceeding 863 mm, meeting standard ASTM A929 or CSA G401 |
| 11 | Flat-rolled product of iron, non-alloy or other alloy steel, aluminized |
| 12 | Flat-rolled product, not further worked than cold-rolled, of specification MS-264-060XK |
| 13 | Flat-rolled product, not further worked than cold-rolled, of grade C1010 SAEJ403, of tensile strength from 70,000 to 84,000 psi inclusive, of elongation on 2 inches of 3%, of a minimum yield strength of 65,000 psi |
| 14 | Flat-rolled product, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.25 inch, of a width exceeding 8 inches |
| 15 | Flat-rolled product, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.375 inch, of a width exceeding 10 inches |
| 16 | Flat-rolled product, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.5 inch, of a width exceeding 10 inches |
| 17 | Flat-rolled product, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.625 inch, of a width exceeding 10 inches |
| 18 | Semi-finished product or bar and rod, of ductile cast iron of grade 65-45-12 |
| 19 | Bar and rod, of grade 4130, vacuum degassed, of hardness of minimum 197 HBW and maximum 237 HBW, of a minimum tensile strength of 95,000 psi, of a minimum yield strength of 75,000 psi, of a diameter of up to 12 inches inclusive |
| 20 | Bar and rod, of grade 4140, vacuum degassed, of hardness of minimum of 205 HBW and maximum of 237 HBW, of a minimum tensile strength of 100,000 psi, of a minimum yield strength of 80,000 psi, of a diameter of up to 12 inches inclusive |
| 21 | Bar and rod, of grade 4130, vacuum degassed, of hardness of minimum 237 HBW, of a minimum tensile strength of 115,000 psi, of a minimum yield strength of 100,000 psi, of a diameter of up to 12 inches inclusive |
| 22 | Bar and rod, of grade 4140 or 4145, vacuum degassed, of hardness of minimum of 253 HBW, of a minimum tensile strength of 125,000 psi, of a minimum yield strength of 110,000 psi, of a diameter of up to 12 inches inclusive |
| 23 | Bar and rod, of grade 4140, heat treated and stress relieved, of a diameter of up to 12 inches, and of a hardness of minimum 32 RC and maximum 34 RC or of a minimum yield strength of up to 130,000 psi |
| 24 | Bar and rod, of grade 4340, heat treated and stress relieved, of a diameter of up to 12 inches, and of a hardness of minimum 32 RC and maximum 36 RC or of a minimum yield strength of up to 140,000 psi |
| 25 | Bar and rod, annealed, of grade 4140, of a diameter of less than 4 inches or more than 7 inches |
| 26 | Bar and rod, of grade 8620, of a diameter of more than 7 inches |
| 27 | Bar and rod, of proprietary grade SW85, of a diameter from 4.0625 to 12 inches inclusive |
| 28 | Bar and rod, of iron or non-alloy steel, of grade AISI 1018 (ASTM A108), of a diameter of more than 7 inches |
| 29 | Bar and rod, of iron or non-alloy steel, nitrocarburized or oxidized, of a minimum yield strength of 75,000 psi, of maximum surface finish of 16 RMS |
| 30 | Bar and rod, of iron or non-alloy steel, of grade ASTM A108, of a diameter of more than 4 inches |
| 31 | Bar and rod, of iron or non-alloy steel, chrome plated, of a minimum yield strength of up to 120,000 psi |
| 32 | Standard I sections S of 3 inches by 5.7 inches, of specification ASTM A529 Grade 50 |
| 33 | Bar and rod, hot-rolled, in irregularly wound coils, of stainless steel, of grade 17-7, 201, 208Lsi, 302, 302HQ, 304, 304L, 305, 308L, 309L, 309Lsi, 310, 314, 316, 316L, 316Lsi, 321, 327, 409, 409NB, 410, 420, 430, 430L or 450 |
| 34 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section, of grade 13-8, 15-5, 17-4, 201, 303, 304, 304L, 316, 316L, 321, 327, 409, 410, 420, 430, 450 or AMS Custom 465 |
| 35 | Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade 13-8, 15-5, 17-4, 201, 303, 304, 304L, 316, 316L, 321, 327, 409, 410, 420, 430 or 450, of a diameter of less than 8 inches |
| 36 | Bar and rod, of stainless steel, of grade 201, 304, 304L, 316, 316L, 321, 327, 409, 420, 430 or 450, of a diameter of less than 8 inches |
| 37 | Bar and rod, of stainless steel, chrome plated |
| 38 | Angle, shape and section, of stainless steel, of grade 201, 304, 304L, 316, 316L, 321, 327, 409, 420, 430 or 450 |
| 39 | Wire of stainless steel, hot-rolled and annealed, soap coated, of type 304L, of a diameter of 0.312 inch |
| 40 | Wire of stainless steel, nickel and soap coated, of type 302 (ASTM A313 specification), of a diameter of up to 5.25 mm |
| 41 | Wire of stainless steel, nickel and soap coated, of type 17-7PH (ASTM A313 specification), of a diameter of up to 5.25 mm |
| 42 | Flat-rolled product, of grade Mangabraze |
| 43 | Flat-rolled product, aluminized, of specification GMW2M-ST-S-CR5-T1M-120 |
| 44 | Bar and rod, of grade 4715, vacuum degassed, of hardness of minimum 56 HRC and maximum 62 HRC, of a minimum tensile strength of 119,000 psi, of a minimum yield strength of 95,000 psi, of a diameter of up to 7 inches |
| 45 | Bar and rod of grade 1522CV |
| 46 | Bar and rod of alloy Aermet 100 |
| 47 | Bar and rod of grade FX-XTRA, of a diameter of up to 16 inches |
| 48 | Bar and rod of grade mold lens quality (MLQ) P20 |
| 49 | Bar and rod of grade MD P-20 |
| 50 | Bar and rod of proprietary grade Microtec 4M95 |
| 51 | Bar and rod of proprietary grade Impact 7 |
| 52 | Bar and rod of grade 5140H |
| 53 | W-section beams |
| 54 | Chrome silicon spring wire |
| 55 | Wire of chrome silicon valve quality |
| 56 | Pipe and tube, drawn over mandrel (DOM) of specification SP-TU-001 |
| 57 | Pipe and tube, drawn over mandrel (DOM) of specification ASTM A513 Type 5 |
| 58 | Pipe and tube, cold drawn, seamless |
| 59 | Pipe and tube, seamless, cold drawn of specification SP-TU-009 |
| 60 | Pipe and tube, seamless, hot-rolled of specification SP-TU-002 |
| 61 | Pipe and tube, hot finished seamless pressure tubing, of grade 1026, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive |
| 62 | Pipe and tube, hot finished seamless pressure tubing, of grade 4130, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive |
| 63 | Pipe and tube, hot finished seamless pressure tubing, of grade 4140, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive |
| 64 | Pipe and tube, hot finished seamless pressure tubing, of proprietary grade Impact 7, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive |
| 65 | Coiled tubing, of an outside diameter from 0.75 inch to 3.5 inches inclusive, of a length of up 10,000 meters, of a wall thickness from 0.08 inch to 0.3 inch inclusive, of a kind used in drilling for oil or gas |
| 66 | Pipe and tube, of iron, non-alloy or other alloy steel, aluminized |
| 67 | Pipe and tube, of circular, square, rectangular or other non-circular cross section, of iron, non-alloy steel, alloy steel or stainless steel, in-line galvanized |
| 68 | Pipe and tube, welded, of grade 4140, of circular cross-section |
| 69 | Pipe and tube, welded, of grade 4142, of circular cross-section |
| 70 | Pipe and tube, straight seam, electric resistance welded, of circular cross-section of an outside diameter of more than 16 inches up to 20 inches inclusive, of a wall thickness of up to 0.625 inches, of grade CSA G40.21 |
| 71 | Pipe and tube, electric resistance welded (ERW) drawn over mandrel (DOM) of any specification |
| 72 | Pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.125 inch, of outside diameter of 0.405 inch |
| 73 | Pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.25 inch (6.35 mm), of outside diameter of 0.540 inch |
| 74 | Pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.375 inch, of outside diameter of 0.675 inch |
| 75 | Coiled tubing, of other alloy steel, of an outside diameter from 0.75 inch to 3.5 inch inclusive, of a length of up 10,000 meters, of a wall thickness from 0.08 inch to 0.3 inch |
| 76 | Pipe and tube, of square section, of a cross-sectional dimension of more than 12 inches up to 16 inches inclusive |
| 77 | Pipe and tube, straight seam, electric resistance welded, of square and equivalent rectangular sections, of dimensions of more than 12 inches by 12 inches up to 16 inches by 16 inches inclusive, of thickness of up to 0.625 inch, of grade CSA G40.21, ASTM A252 or ASTM A500 |
| 78 | Pipe and tube, straight seam, electric resistance welded, of square section, of dimension of 1.5 inch by 1.5 inch, of a thickness of 0.25 inch, of grade CSA G40.21, ASTM A252 or ASTM A500 |
| 79 | Pipe and tube, welded, of non-circular cross-section other than square or rectangular, of grade AISI 1526 |
| 80 | Pipe and tube, welded, of non-circular cross-section other than square or rectangular, of grade AISI 4130 |
| 81 | Aluminum plate, sheet and strip, of alloy AA3002, AA3003, AA3004, AA3104, AA3105, AA3105-H12, AA3105-H24, AA5005, AA5052, AA5083, AA5086, AA5182, AA5205, AA5251, AA5454, AA5657, AA5754, AA6005A, AA6014, AA6016, AA6061, AA6083, AA6111, AA6181A/AA6005A or AA6451, of a thickness from 0.2 mm to 9.2 mm inclusive |
| 82 | Aluminum composite material consisting of aluminum sheets bonded by a thermoplastic core |
| 83 | Aluminum cans of 89 ml, 148 ml, 201 ml, 222 ml, 236 ml, 248 ml, 250 ml, 296 ml, 300 ml, 354 ml, 355 ml, 375 ml, 473 ml, 500 ml, 568 ml, 710 ml, 740 ml, 941 ml or 946 ml |
| 84 | Flat-rolled product, not further worked than hot-rolled, of proprietary grade Usibor 1500, of a thickness from 0.8 mm to 2.5 mm inclusive, of a width of up to 1650 mm |
| 85 | Flat-rolled product, hot-rolled, pickled and oiled, of grade HSLA 420LA, of specification SAE2340, of a minimum thickness from 0.055 inch to 0.066 inch inclusive |
| 86 | Flat-rolled product, hot-rolled, pickled and oiled, of grade HSLA 500LA, of specification GMW3032M-ST-S, of a minimum thickness of 0.045 inch |
| 87 | Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 50, of a minimum thickness of 0.06 inch, of a width of 51.9 inches or 56.5 inches |
| 88 | Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 50, of a minimum thickness of 0.066 inch, of a width of 53.1 inches |
| 89 | Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.047 inch or 0.058 inch |
| 90 | Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a nominal thickness of 0.063 inch, of a width of 48.475 inches |
| 91 | Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.066 inch, of a width of 50.9 inch |
| 92 | Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.067 inch, of a width of 47.4 inches or 53.2 inches |
| 93 | Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness from 0.044 inch to 0.06 inch inclusive |
| 94 | Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a nominal thickness of 0.063 inch or 0.064 inch |
| 95 | Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness of 0.067 inch, of a width of 55.916 inches |
| 96 | Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness from 0.073 inch, of a width of 59.186 inches |
| 97 | Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness of 0.075 inch, of a width of 54.3, 54.67, 55.5 or 56.5 inches |
| 98 | Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 80, of a minimum thickness of 0.067 inch, of a width of 50.8 inches |
| 99 | Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 80, of a minimum thickness of 0.066 inch, of a width of 52.423 or 54.2 inches |
| 100 | Flat-rolled product, not further worked than hot-rolled, of grade Ympress 100XF, of a thickness of 0.5 inches, of a width of 60 inches, of a length of 120 inches |
| 101 | Flat-rolled product, not further worked than cold-rolled, of grade CR420LA, of specification GMW3032M-ST-S, of a thickness of 0.08 inches or more |
| 102 | Flat-rolled product, not further worked than cold-rolled, of grade HSLA 70, of a minimum thickness of 0.0566 inch, of a width of 45.863 inches |
| 103 | Flat-rolled product, not further worked than cold-rolled, of grade HSLA 70, of a minimum thickness of 0.0606 inch, of a width of 46.3 inches |
| 104 | Flat-rolled product, not further worked than cold-rolled, of grade 1074, of a thickness from 0.055 inch to 0.165 inch inclusive, of a width from 24.98 inches to 48 inches inclusive, of a length from 48 inches to 120 inches inclusive |
| 105 | Flat-rolled product, galvanized, of specification HR-550-610-LA-S-G160/60 U, of a nominal thickness of less than 2.0 mm |
| 106 | Flat-rolled product, galvanized, of specification GMW3023M-ST-S-HR550LA, of a nominal thickness of less than 2.0 mm |
| 107 | Flat-rolled product, galvanized, of grade HSLA 50, of a minimum thickness of 0.17 inch |
| 108 | Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.066, 0.0667, 0.067, 0.073, 0.074 or 0.0743 inch |
| 109 | Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.083 inch, of a width of 41 inches |
| 110 | Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.085 inch, of a width of 47.266 inches |
| 111 | Cold-rolled and hot dipped steel substrate coil, of Grade 50 or 80, of specification ASTM A792, plated or coated with aluminum-zinc alloys, of a thickness of 3.81 mm, of a width of 1041.4 mm |
| 112 | Flat-rolled product, aluminum-silicon coated, of proprietary grade Usibor 1500, of a thickness from 0.8 mm to 2.5 mm inclusive, of a width of up to 1650 mm |
| 113 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade SA516 Gr 70 normalized, of a thickness of 4.5 inches, of a width of less than 600 mm |
| 114 | Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade 10B2, of a nominal thickness of 0.12 inch, of a width of 3.65 or 5.2 inches |
| 115 | Flat-rolled product, not further worked than cold-rolled, of grade 1074, of a width from 1.575 inches to 9.5 inches inclusive, of a thickness from 0.032 inch to 0.125 inch inclusive |
| 116 | Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade C1050 or C1075, of specification ASTM A682 or A684, of a thickness of 0.0098 inch or more |
| 117 | Flat-rolled product of iron or non-alloy steel, nickel and brass coated or plated by an electro-plating process, of a width of less than 600 mm |
| 118 | Bar and rod, hot-rolled, of grade A105, A350, 1018, 1030, 1040, 1045, 1050 or 1055, vacuum degassed, of a diameter from 2.5 inches to 10 inches inclusive |
| 119 | Bar and rod, of grade A36, of a thickness of 1.5 inches, of a width of 1.625 inches, of a length of 5.5 inches |
| 120 | Bar and rod, not further worked than hot-rolled, of grade 4140, of a diameter from 7 inches to 12 inches inclusive, of a minimum yield strength of up to 60,000 psi |
| 121 | Bar and rod, of grade 60, of specification ASTM A615 or AASHTO M31, epoxy coated, of a diameter from 0.5 inch to 2 inches inclusive, of a length of 18 inches |
| 122 | Cold drawn bar, of grade 1018, of a diameter from 4.5 inches to 5.75 inches inclusive, of specification ASTM A108 |
| 123 | Cold drawn bar, of grade 1144, of a diameter from 2.5 inches to 4.5 inches inclusive, of specification ASTM A311, of a minimum yield strength of 100,000 psi |
| 124 | Bar and rod, in coils, not further worked than cold-formed or cold-finished, of grade AISI 1010, 1015, 1018, 1020, 1022, 10B22 or 8620, of a diameter from 0.468 inches to 1.46 inches inclusive |
| 125 | Nitrated round bar, of grade C1045, of minimum yield strength of up to 100,000 psi |
| 126 | Wire, in coil, of grade AISI 10B35, silicon killed, with phosphate and polymer coating, of a diameter of 1.156 inches |
| 127 | Wire of iron or non-alloy steel, electro-galvanized |
| 128 | Flat-rolled product of stainless steel, electro-galvanized, coated with ethylene propylene diene monomer (EPDM), of a thickness from 0.015 to 0.025 inches inclusive, of a width from 1.265 to 1.796 inches inclusive |
| 129 | Flat-rolled product, of stainless steel, of a width of less than 600 mm, of any grade of the 300 Series |
| 130 | Rod or wire, of stainless steel, of grade 302, 304 SS, 316, 410 or 410 SS, of specification ASTM A493 or A555, annealed, soap coated, of a diameter from 0.2 inch to 0.672 inch inclusive |
| 131 | Flat-rolled product, hot-rolled, heat treated, of grade 4142, of a thickness from 0.25 inch to 12 inches |
| 132 | flat-rolled product of other alloy steel, cold-rolled, galvanized, of specification 50002-LAC550Y620T G160/60 U, of a width of 600 mm or more |
| 133 | Flat-rolled product, galvanized, of grade HSLA 50, of a minimum thickness of 0.17 inch |
| 134 | Flat-rolled product, galvanized, of grade HSLA 60, of a minimum thickness of 0.085 inch, of a width of 57.15 inches |
| 135 | Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.066, 0.073 or 0.074 inch |
| 136 | Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.083 inch, of a width of 41 inches |
| 137 | Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.085 inch, of a width of 47.266 inches |
| 138 | Flat-rolled product, rough machined and rotary ground, of grade 4140, 4142, O-1, A2, D2, S7, H13 or M2, of a thickness from 0.25 inch to 12 inches, of a width greater than 600 mm |
| 139 | Flat-rolled product, rough machine and rotary ground, of grade M4, M2 or T15, of a thickness from 0.25 inch to 12 inches, of a width of less than 600 mm |
| 140 | Flat-rolled product of other alloy steel, cold-rolled, spheroidized and annealed, of grade 4140 or SAE J404 4130, of a thickness from 2.9 mm to 7.1mm inclusive, of a width from 33.78 mm to 245 mm inclusive |
| 141 | Flat-rolled product of other alloy steel, not further worked than cold-rolled, of grade ASTM A980 M160 Martinsite (MART), of a width of 7.375 inches, with electrogalvanized coating 40G/40G |
| 142 | Flat-rolled product, rough machined and rotary ground, of grade 4140, 4142, O-1, A2, D2, S7, H13, 1V, 3V, 4V, 9V, 10V or 15V, of a thickness from 0.25 inch to 12 inches, of a width of less than 600 mm |
| 143 | Flat-rolled product of other alloy steel, galvanized, of specification MS 50002-LAC550Y620T G160/60U, of a thickness of 2.1 mm, of a width of 228.6 mm |
| 144 | High speed steel round bars, turned, peeled or centerless ground, surface finish, of grade M2, M4, T15, M42, Rex 20, Rex 45 or Rex 76, of a diameter of 0.125 inch to 24 inches inclusive |
| 145 | Bars and rods of other alloy steel, not further worked than hot-rolled, of alloy 4130, 4140, 4145, 4150, 4320, 4340, 52100, 8620, 8630, 8640 or 9310, vacuum degassed, fine grain, with a section size from 2.5 inches to 10 inches inclusive |
| 146 | Alloy or tool steel round bars, rough turned, peeled or centerless ground, surface finish, of grade 4140 HT, P20, O-1, L6, O6, A2, D2, H13, S7, LescoWear, 1V, 3V, 4V, 9V, 10V or 15V, of a diameter of 0.125 to 24 inches inclusive |
| 147 | Centrifugal cast tube, of alloy SL96L, of an outside diameter of 13 inches, of an inside diameter of 12.625 inches, of a length of 58.56 inches or 65.25 inches |
| 148 | Mechanical tubing, of grade 4140, of an outside diameter from 6 inches to 10 inches inclusive, of an inside diameter from 4 inches to 8 inches inclusive, of a wall thickness from 1 inch to 2 inches inclusive |
| 149 | Hollow profile, of stainless steel, of specification ASTM A511 |
| 150 | Tube, seamless, of stainless steel, of grade 304, 316, 317 or 347, of a diameter from 1 inch to 3 inches inclusive, of a wall thickness from 0.125 inch to 0.2 inch inclusive |
| 151 | Tube, cold drawn, stress relieved and annealed, of grade AISI 4140 or 8630, of an outside diameter from 1.25 inches to 2.375 inches inclusive, of an inside diameter from 0.851 inch to 1.476 inches inclusive |
| 152 | Tube, seamless, spray metal (SM), of grade AISI 4140 or 8630, of an outside diameter from 1.22 inches to 2.162 inches inclusive, of an inside diameter from 0.851 inch to 1.29 inches inclusive |
| 153 | Tube, seamless, quenched and tempered, cold drawn, of grade AISI 4130 or 4140, of an outside diameter from 1.25 inches to 2.375 inches inclusive, of an inside diameter from 0.851 inch to 1.476 inches inclusive |
| 154 | Tube, welded, of circular cross-section, electrical metallic tubing, conforming to standard UL 797 |
| 155 | Hydraulic tube, of grade J525 1008 or 1010, of specification of ASTM SA/214, of an outside diameter of 0.625 inches or 0.750 inches, of a minimum yield strength of 25,000 psi |
| 156 | Tube, welded, of stainless steel, of circular cross-section, of specification ASTM A240 or A269, of an outside diameter of up to 4.5 inches inclusive |
| 157 | Tube, drawn over mandrel (DOM), of square or rectangular cross-section, of grade C1010 or C1026 |
| 158 | Tube, welded, of stainless steel, of square rectangular cross-section, of specification ASTM A240 |
| 159 | Aluminium strip, of grade 5052 H32/34, coated with thermoplastic polyolefin (TPO) and ethylene propylene diene monomer (EPDM), of a thickness of 0.024 inch |
| 160 | Geodesic dome for storage tanks, of aluminum, of a diameter from 20 inches to 125 inches |
| 161 | Aluminum coil, of alloy AA3105, painted or coated, of a thickness of 0.019 inch, of a width from 13 inches to 24 inches inclusive |
| 162 | Fuel tank, of aluminum, of 43 or 55 gallon, of dimensions of 62 inches by 20 inches by 24 inches, with inner poly fuel cell, with a black powder coat finish |
| 163 | Aluminum horseshoes |
| 164 | Aluminum bar, rod, tube or profile, of alloy 6105-T5, of a diameter of 3 inches, of a length of 15, 20 or 25 feet |
| 165 | Round stainless steel wire, of grade 302 or 304, of a diameter from 0.178 mm to 1.092 mm, nickel coated |
| 166 | Rectangular stainless steel wire, of grade 304, of a dimension of 6.35 mm by a dimension of 0.457 mm, nickel coated |
| 167 | Square or rectangular stainless steel wire, of grade 301 or 631, of a dimension from 0.089 mm to 18.128 mm by a dimension from 0.305 mm to 5.08 mm, soap coated |
| 168 | Tube, welded, of circular cross-section, electrical rigid metal conduit, conforming to standard UL 6 |
- SOR/2018-289, s. 3
SCHEDULE 2(Subsection 1(1) and paragraph 1(2)(b))
| Column 1 | |
|---|---|
| Item | Description of Goods |
| 1 | Flat-rolled product, not further worked than hot-rolled, of grade 1037, of a minimum width of 47.375 inches |
| 2 | Flat-rolled product, cold-rolled, spheroidized, annealed, of grade 4130 |
| 3 | Flat-rolled product, cold-rolled, annealed spring steel, of grade SAE 1095 |
| 4 | Flat-rolled product, cold-rolled, in coils, spheroidized annealed, of grade 10B21 |
| 5 | Flat-rolled product, galvannealed, of grade HSLA 70, of a minimum width of 44.125 inches |
| 6 | Flat-rolled product, galvanized, of grade HSLA 70, of a minimum width of 43.29 inches |
| 7 | Flat-rolled product, annealed spring steel of grade C1070 CR |
| 8 | Flat-rolled product, with polymer coating, of a thickness not exceeding 2.8 mm, of a width not exceeding 863 mm, meeting standard ASTM A929 or CSA G401 |
| 9 | Flat-rolled product, cold-rolled, of AISI 1055 carbon steel |
| 10 | Flat-rolled product, cold-rolled, annealed strip steel, of grade C1050 |
| 11 | Bar and rod of grade AISI 52100 |
| 12 | I-section beams of iron or non-alloy steel |
| 13 | Unequal leg angles with dimensions exceeding 7 inches by 4 inches by 0.5 inch, of iron or non-alloy steel |
| 14 | Angle, shape and section, MC channels of a depth exceeding 3 inches |
| 15 | Angle, shape and section, C channels of imperial size exceeding C 12 inches by 25 lbs/ft |
| 16 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 201, 304, 316, 321, 327, 409, 420, 430 or 450 |
| 17 | Flat-rolled product, clad, plated or coated, of grade 4140 |
| 18 | Flat-rolled product, clad, plated or coated, of grade 4142 |
| 19 | Bar and rod, not further worked than cold-formed or cold-finished, of grade AMS 6425 |
| 20 | Pipe and tube, seamless, of grade AISI 1026 |
| 21 | Pipe and tube, seamless, of grade AISI 1045 |
| 22 | Pipe and tube, of grade AISI 1526M |
| 23 | Pipe and tube, seamless, of grade 4140, of circular cross-section |
| 24 | Pipe and tube, seamless, of grade 4142, of circular cross-section |
| 25 | Pipe and tube, of grade 4140, vacuum degassed, of a minimum yield strength of 80,000 psi, of outside diameter from 3.25 inches to 8 inches inclusive |
| 26 | Pipe and tube, welded, of circular cross-section, of grade AISI 1526 |
| 27 | Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 2 inches by 1.5 inches, of grade CSA G40.21, ASTM A252 or ASTM A500 |
| 28 | Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 1.97 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513 |
| 29 | Pipe and tube, straight seam, electric resistance welded, of rectangular (ERW) section, of dimensions of 2.36 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513 |
| 30 | Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 4.72 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513 |
| 31 | Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 4.72 inches by 2.36 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513 |
| 32 | Flat-rolled product, not further worked than hot-rolled, of grade CSA G40.21 350W or CSA G40.21 350W Category 1, of a thickness of 3.27 inches or 3.50 inches, of a width of 72 inches or 76 inches, of a length of 544 inches, 550 inches or 552 inches |
| 33 | Hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.25 inches, of a width of 96 inches, of a length of 240 inches or 288 inches |
| 34 | Hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.3125 inches, of a width of 120 inches, of a length of 240 inches or 288 inches |
| 35 | Hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.625 inches, of a width of 96 inches, of a length of 240 inches or 288 inches |
| 36 | Flat-rolled product, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm, of a thickness of 1.2 mm |
| 37 | Flat-rolled product, not further worked than cold-rolled, of grade HSLA 80, of a minimum thickness of 0.0756 inch, of a width of 51.975 inches |
| 38 | Flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.022 inch, of a width of 52.46 inches |
| 39 | Flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.037 inch, of a width of 40.34 or 47.695 inches |
| 40 | Flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.0377 inch, of a width of 44 inches |
| 41 | High carbon cold rolled-strip, full hard and oscillated coils, of grade SAE 1035, of a thickness of 0.055 inch, of a width of 0.75 inches |
| 42 | Flat-rolled product of iron or non-alloy steel, spheroidized and annealed, of grade SAE J403 C1050 or C1050 SA, of a thickness from 2.9mm to 7.1mm inclusive, of a width from 33.78 mm to 245 mm inclusive |
| 43 | Special Bar Quality (SBQ) bars, of grade AISI C-1536, A-4623-M, C-1541-VM, OP15, A-4320-M, A-4138-M, A-4330-M or A-4142-M, of chemical analysis in accordance with ASTM A751, of tensile strength in accordance with ASTM A370, of hardness in accordance ASTM E18, of a diameter from 0.625 inches to 1.5 inches inclusive, of a length from 25 feet to 30.2 feet inclusive |
| 44 | Round bar, of grade C1045, of a diameter of 3.5 inches, turned, ground and polished (TG&P), of a minimum tensile strength of up to 100,000 psi |
| 45 | Round bar, of grade C1045, turned and polished (TP), of a diameter of 0.75 inch |
| 46 | Bar and rod, of grade 1537M, 4119M or 4318M, of a diameter from 19.05 mm to 30.16 mm inclusive |
- SOR/2018-289, s. 3
SCHEDULE 3(Subsection 1(1) and paragraph 1(2)(c))
| Column 1 | Column 2 | Column 3 | Column 4 | |
|---|---|---|---|---|
| Item | Business Number | Description of Goods | Period | Conditions |
| 1 | 100317619 | Flat-rolled product of non-alloy steel, hot-rolled | From July 1, 2018 to August 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 2 | 861611671 | Flat-rolled product of non-alloy steel, hot-rolled | From July 1, 2018 to August 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 3 | 869553560 | Bars and rods, hot-rolled, in irregularly wound coils, of iron, non-alloy or other alloy steel, of grade 1006, 1008, 1012, 1015, 1018, 1030, 1042, 1053, 1055, 1057, 1063, 1067, 1070, 1072 or 1077, of a diameter from 5.5 mm to 16 mm inclusive | For goods imported on or after July 1, 2018 | For use in manufacturing of steel wire |
| 4 | 105120190 | Flat-rolled product of iron or non-alloy steel, not in coils, not further worked than hot-rolled, of a width of 120 inches, of a length of 370 inches, of a thickness of 10, 11, 14 or 17 mm, of grade CSA G40.21 260 WT | From July 1 to August 31, 2018 inclusive | Goods ordered under Purchase Order Number 025578 dated May 17, 2018 |
| 5 | 864474002 | Flat-rolled product of iron or non-alloy steel, steel shim stock, of a thickness of 0.008 inches | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 6 | 864474002 | Flat-rolled product, not in coils, hot-rolled, of specification MIL-STD-12560, MIL-STD-12560 Class 1, MIL-STD-46100, CMS18 or CMS 19 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 7 | 864474002 | Flat-rolled product, of specification QT 100 (GD)LS (ASTM A514), of a thickness from 1.25 inches to 4.5 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 8 | 864474002 | Tube, hot-rolled, of specification ASTM A519, of Grade 1026 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 9 | 864474002 | Aluminum angle of grade 6061T6 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 10 | 819484965 | Aluminum bar of alloy 6082 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 11 | 819484965 | Bars and rods, hot-rolled, in irregularly wound coils, of grade 30MnVS6, 1008 MOD, 1018, 1038, 1541, 5140, 5140 H or 8615 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 12 | 819484965 | Bars and rods, not further worked than cold-formed or cold-finished, of grade 30MnVS6, 1008 MOD, 1018, 1038, 1541, 5140, 5140 H or 8615 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 13 | 896301165 | Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than hot-rolled or cold-rolled, of grade 080XLF, 10B21, 1018, 1018 AK, 1018 SK, 1020, 1020 AK, 1050, 1055/1065, 4130, 4140, 8620, 340 XF, 420 XF, 550 XF or SPFH 590 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 14 | 874527823 | Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than cold-rolled, of grade 1018 AK, 1018 SK, 1020 AK, 1050 or 8620 | From July 1, 2018 to November 12, 2018 inclusive | For use in the manufacture of original equipment parts or other parts |
| 15 | 870249414 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade 080 XLF, 420 XF or 550 XF | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 16 | 710327693 | Flat-rolled product of iron, non-alloy or other alloy steel, not in coils, not further worked than hot-rolled | From July 1, 2018 to August 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 17 | 894699818 | Square bar, round bar or angle, of grade A588 | From July 1, 2018 to August 31, 2018 inclusive | For imports recorded under the following transaction number (B3-3 Form):
|
| 18 | 894699818 | Tube of square or rectangular cross-section, welded | From July 1, 2018 to August 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 19 | 894699818 | Tube of circular cross-section | From July 1, 2018 to August 31, 2018 inclusive | For imports recorded under the following transaction number (B3-3 Form):
|
| 20 | 100763440 | Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than hot-rolled, pickled or cold-rolled, of specification MS66, MS67, MS6000, SCGA CR GA 270, MS.50002, SPH HR 590, GMW CR 340, GMW CR CR3¸ GMW CR 420, GMW HR HR1 or GMW CR 340 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 21 | 100763440 | Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000, MS.50002, M2020, M2027, SCGA GN DQ SK, SCGA GN EDDQ AK, GMW CR 420, GMW HR HR1 or GMW CR 340 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 22 | 100763440 | Aluminum plates, sheets and strip, of alloy AA3004 or AA5000 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 23 | 100874247 | Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than hot-rolled, pickled or cold-rolled, of specification MS 67, MS264, MS6000 or MS.50002 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 24 | 100874247 | Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000, MS.50002 or GMW CR | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 25 | 100874247 | Aluminum plates, sheets and strip, of alloy AA3004 or AA6000 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 26 | 899313571 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, pickled or cold-rolled, of specification SPH HR 370, SPH HR 440 or MS 67 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 27 | 899313571 | Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000 or GMW CR | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 28 | 107304340 | Flat-rolled product of iron, non-alloy, other alloy or stainless steel, not further worked than hot-rolled, pickled or cold-rolled, of specification MS66, MS67, MS264, GMW HR 340, SPC CR DQ SK, M1142, M2020, MS.50002, MS6000, SCGA GN DQ AK, SP GN DQ, GMW CR 270, GMW HR HR1 or M2020 CR | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 29 | 107304340 | Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000, MS.50002, GMW CR, GMW HR, MS66, MS67, MS264 or SCGA GN | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 30 | 107304340 | Aluminum plates, sheets and strip, of alloy AA3004, AA5000, AA6016, AA6061 or A93003 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 31 | 100086768 | Flat-rolled product of iron or non-alloy steel, cut to length or configured blank, flat polished and/or treated with zinc phosphate and lube | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 32 | 123307597RM0020 | Flat-rolled product, not further worked than hot-rolled, of specification MS66 or MS.50002 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 33 | 123307597RM0020 | Flat-rolled product, clad, plated or coated, of specification GA6M55V 590 DT, GA6M66 HR 11, 6M66V 050XK, MS.50002, MS264 or GMW3032M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 34 | 123307597RM0020 | Aluminum plates, sheets and strip, of specification MS-5007 5052-H32 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 35 | 123307597RM0013 | Flat-rolled product, not further worked than hot-rolled, of specification MS50002, 6M55V035SK or 6M55HR12 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 36 | 123307597RM0013 | Flat-rolled product, galvanized, of specification MS.50002, MS-6000 or WSD-1A333-A2 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 37 | 123307597RM0013 | Flat-rolled product, not further worked than cold-rolled, of specification MS50002 or M1A333-A2 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 38 | 123307597RM0013 | Hollow profile of aluminum, of alloy 6061 T6, of specification ASTM B221 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 39 | 123307597RM0013 | Aluminum plates, sheets and strip, of specification 5052-H32-GMW15935M-AL-S-5000A-O or 5052-H32 GMW15192M-AL-S-5000-ST-90-U | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 40 | 123307597RM0013 | Aluminum castings of alloy A356-T6 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 41 | 123307597RM0033 | Flat-rolled product, hot-rolled, galvanized, of specification 6M55V-060, 50002, MS-6000, hot-rolled 060XK or LAX420Y480T | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 42 | 123307597RM0033 | Flat-rolled product, not further worked than cold-rolled, of specification MS-264-60XK or MS-264-35XK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 43 | 123307597RM0033 | Tube, of iron or non-alloy steel, welded, of circular cross-section, of specification 22MnB5 M | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 44 | 123307597RM0033 | Hollow profile of aluminum, of alloy 6061 T6, of specification ASTM B221 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 45 | 123307597RM0023 | Flat-rolled product of non-alloy or other alloy steel, galvanized, of a width of 26.38, 28.74, 37.205 or 32.125 inches | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 46 | 123307597RM0023 | Flat-rolled product, not further worked than hot-rolled, of a width of 10.18, 10.275 or 23.307 inches | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 47 | 123307597RM0023 | Flat-rolled product, not further worked than cold-rolled, of a width of 11.875 inches | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 48 | 123307597RM0023 | Flat-rolled product, galvanized, of a width of 9.5, 17.559 or 20.866 inches | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 49 | 123307597RM0029 | Flat-rolled product, not further worked than cold-rolled, of a boron and manganese alloy | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 50 | 123307597RM0029 | Flat-rolled product, high strength low alloy steel, hot-rolled or cold-rolled, galvanized | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 51 | 123307597RM0029 | Flat-rolled product, low carbon mild steel coil, with hot dipped galvanneal zinc coating | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 52 | 123307597RM0019 | Flat-rolled product of other alloy steel, not further than cold-rolled, of a thickness of 0.89 mm, 1.33 mm or 1.65 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 53 | 123307597RM0019 | Flat-rolled product of other alloy steel, electrolytically or otherwise plated or coated with zinc, of a thickness from 0.66 mm to 2.86 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 54 | 123307597RM0019 | Flat-rolled of other alloy steel, not further worked than hot-rolled, of a thickness of 2.514 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 55 | 123307597RM0019 | Aluminum plates, sheets and strip, of aluminum alloys, not clad, of a thickness from 0.97 mm to 1.94 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 56 | 123307597RM0022 | Flat-rolled product, low carbon steel, cold-rolled, of specification MS-67 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 57 | 123307597RM0022 | Flat-rolled product, cold-rolled, dual-phase or martensitic steel, electrogalvanized, of specification GMW3399M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 58 | 123307597RM0022 | Flat-rolled product, cold-rolled, dual phase or mild steel, galvanized, of specification MS.50002 or GMW3399M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 59 | 123307597RM0022 | Flat-rolled product, not further worked than cold-rolled, multi-phase or mild steel, of specification GMW3399M-ST-S or MS-67 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 60 | 123307597RM0022 | Flat-rolled product, cold-rolled or hot-rolled, dual-phase, multi-phase or mild steel, electrogalvanized or galvanized, of specification MS.50002, GMW3399M-ST-S or GMW3032M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 61 | 123307597RM0022 | Aluminum plates, sheets or strip, of alloy 6111-T4, of specification WSB-M2A152-A1 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 62 | 123307597RM0030 | Flat-rolled product, not further worked than cold-rolled, of grade bake hardenednable, of a nominal thickness of 0.0394 or 0.0472 inches | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 63 | 123307597RM0030 | Flat-rolled product, cold-rolled, of low carbon, high strength low alloy or dual phase steel, hot dipped with galvanneal zinc coating, of a nominal thickness from 0.0276 inches to 0.1575 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 64 | 896543659RM0006 | Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade 1020, of a thickness of 2.4384 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 65 | 896543659RM0014 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, of grade SAE J403 1010 or SAE J403 1022 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 66 | 849292990 | Bars and rods, hot-rolled, in irregularly wound coils, of grade 9254, SUP12MT or HDS12, of a diameter from 11.9 mm to 17.9 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 67 | 849292990 | Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, of grade 5160, of a diameter from 19 mm to 40 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 68 | 849292990 | Tubes and pipes, welded, of circular cross-section, of grade 15B27MC, 15B27M, 15B27, 15B30M or 15B34, of a wall thickness from 3 to 6 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 69 | 846263531 | Semi-finished tubes of iron or steel, of an outside diameter of 4.5 inches to 7 inches inclusive or of an outside diameter of 9.625 inches, of a kind used in production of finished casing and tubing for oil or gas | For goods imported on or after July 1, 2018 | Goods supplied by affiliated company |
| 70 | 104546718 | Flat-rolled product, in coils, galvanized, of specification ASTM A653 Grade 55 | For goods imported on October 1, 2018 or after | Goods ordered under purchase number:
|
| 71 | 104546718 | Flat-rolled product, in coils, galvanized, of specification 50002-DPC420Y780T | For goods imported on or after November 1, 2018 | Goods ordered under purchase order number:
|
| 72 | 104546718 | Flat-rolled product, in coils, galvanized, of designation Extra Deep Drawing Steel (EDDS) | For goods imported on November 1, 2018 or after | Goods ordered under purchase order number:
|
| 73 | 104546718 | Flat-rolled product, in coils, galvanized, of specification 50002-LAC340Y410T | For goods imported on September 1, 2018 or after | Goods ordered under purchase order number:
|
| 74 | 104546718 | Flat-rolled product, in coils, galvanized, of designation Deep Drawing Steel (DDS) | For goods imported on October 4, 2018 | Goods ordered under purchase order number 27279 (May 1, 2018) - imported under transaction number (B3-3 Form) 13177192100313 |
| 75 | 104546718 | Flat-rolled product, in coils, galvanized, of designation Commercial Steel (CS) Type B 1006 | For goods imported on or after December 1, 2018 | Goods ordered under purchase order number 27167 (April 10, 2018) – to be imported |
| 76 | 104546718 | Flat-rolled product, in coils, galvanized, of specification GMW3032M-ST-S 500LA | From August 1, 2018 to September 30, 2018 inclusive | Goods ordered under Purchase Order Number 27334 (May 16, 2018) - imported under any of the following transaction numbers (B3-3 Form):
|
| 77 | 104546718 | Flat-rolled product, in coils, galvanized, of specification SAE J2340 550XF | From August 1, 2018 to September 30, 2018 inclusive | Goods ordered under Purchase Order Number 27359 (May 24, 2018) – imported under the following transaction number (B3-3 Form):
|
| 78 | 105492664 | Flat-rolled product, galvanized or galvannealed, of specification GMW3032M-ST-S, GMW3399W-ST-S, MS-50002, MS-6000 or HR660Y760T-CP | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 79 | 105492664 | Flat-rolled product, not further worked than cold-rolled, of specification WSS-M1A365-A11, WSS-M1A365-A13, WSS-M1A367-A36, WSD-M1A333-A2 or GMW3032M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 80 | 105492664 | Flat-rolled product, not further worked than hot-rolled, of specification WSS-M1A354-A20, WSD-M1A333-A1, WSS-M1A365-A20, WSS-M1A365-A22, WSS-M1A365-A23, WSS-M1A367-A46, JSH270E, MS-6000, HR PO CQ 66, HR PO DQ 66, HR PO DQ AK 66, HR660Y760T-CP, SAEJ403, MS66, HR660Y760T-CP, MS.50002 or 6M44VA | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 81 | 105492664 | Aluminum plates, sheets and strip, of alloy 6022-T4 or 1100 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 82 | 105492664 | Aluminum extrusion | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 83 | 105492664 | Tube, welded, of circular cross-section, of an outside diameter from 0.787 inch to 3.125 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 84 | 132644584 | Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S-CR420LA | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 85 | 132644584 | Flat-rolled product, galvanized, of specification GMW3399M-ST-S-CR780T/420Y-DP-HD60G60G-U, of a width of 241.30 mm or 472.44 mm, of a thickness of 1.2mm (+/- 0.6 mm) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 86 | 132644584 | Flat-rolled product, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm, of a thickness of 1.2mm (+/- 0.6 mm ) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 87 | 132644584 | Flat-rolled product, galvanized, of specification GMW3399M-ST-S-CR980T/700Y-MP-LCE EG60G60G-U, of a width of 1187.45 mm, of a thickness of 1.2mm (+/- 0.6 mm) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 88 | 132644584 | Flat-rolled product, galvanized, of specification 50002-LAC550Y620T G160/60 U, of a width of 228.60 mm or 647.70 mm, of a thickness of 2.10 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 89 | 104708409 or 809569957 | Flat-rolled product of iron or non-alloy steel, not in coils, not further than hot-rolled, of classification DNV-GL Grade A, DNV-GL Grade A36, DNV-GL Grade D or DNV-GL Grade D36 | From July 1, 2018 to June 30, 2019 inclusive | |
| 90 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, not further than cold-rolled, of grade SAE J2340 CR550XF | From July 1, 2018 to December 31, 2018 inclusive | For use in the manufacture of original equipment parts or other parts |
| 91 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, not further than cold-rolled, of grade SPC 980 DU-T | From July 1, 2018 to December 31, 2018 inclusive | For use in the manufacture of original equipment parts or other parts |
| 92 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, not further than cold-rolled, of grade 4130 annealed | From July 1, 2018 to December 31, 2018 inclusive | For use in the manufacture of original equipment parts or other parts |
| 93 | 861435121 | Flat-rolled product, not further worked than hot-rolled, of specification MS-264-S-060XF, of a nominal thickness of 3 mm to 4 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 94 | 861435121 | Flat-rolled product, not further worked than cold-rolled, of specification MS-67-S-DDQ CR06 Grade, of a nominal thickness of 0.76 or 0.8 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 95 | 861435121 | Flat-rolled product, not further than hot-rolled, of specification GMW 3032M-ST-S-HR420 LA, of a nominal thickness of 2.5 mm or 3.5 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 96 | 861435121 | Flat-rolled product, not further worked than cold-rolled, of specification GMW 3032M-ST-S-CR340 LA | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 97 | 861435121 | Flat-rolled product, not further worked than cold-rolled, of specification GMW 3032M-ST-S-CR420 LA, of a nominal thickness from 0.5 mm to 0.8 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 98 | 861435121 | Flat-rolled product, not further worked than cold-rolled, of specification SAE J2340 340 XF, of a nominal thickness of 0.8 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 99 | 861435121 | Flat-rolled product, not further worked than cold-rolled, of specification ASTMA 1008A DDS | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 100 | 897264149 | Flat-rolled product, of non-alloy steel, not further worked than hot-rolled, pickled and oiled, of specification MS-264-035-SK or MS-66-CQ | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 101 | 897264149 | Flat-rolled product, of non-alloy steel, not further worked than cold-rolled, pickled and oiled, of specification MS-264-080-XK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 102 | 897264149 | Flat-rolled product, of other alloy steel, plated or coated with zinc, of specification MS-6000-99V-040SK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 103 | 867876195 | Flat-rolled product, of non-alloy steel, not further worked than cold-rolled, pickled and oiled, of specification MS-264-050-XK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 104 | 867876195 | Flat-rolled product, of non-alloy steel, plated or coated with zinc, of specification MS-6000-55V-080XK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 105 | 867876195 | Flat-rolled product, of other alloy steel, plated or coated with zinc, of specification MS-6000-55V-590DT, MS-6000-44A-DQ or MS-6000-55V-780TT | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 106 | 897419461 | Flat-rolled product, of non-alloy steel, plated or coated with zinc, of specification MS-6000-55E-CR02 or MS-6000-99V-050XK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 107 | 897419461 | Flat-rolled product, of other alloy steel, plated or coated with zinc, of specification MS-6000-44VA-080XK, MS-6000-55PE-CR02, MS-6000-44A-DDQ, MS-6000-44A-DQ, MS-6000-55E-CR02, MS-6000-55V-690TT or MS-6000-55V-590DT | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 108 | 865927362 | Aluminum profiles, of aluminum alloy | From July 1, 2018 to November 30, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 109 | 121306914 | Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of specification 50002-CR02, 50002-CR04, 50002-DPC330Y590T, 50002-DPC340Y590T, 50002-HR13, 50002-LAC340Y410T, 11250 LAC 340Y410T, 5000-LAC550Y620T, 50002-LAH340Y410T, 50002-LAH550Y620T, 50002-TRC400Y690T or DDS 60G60G GA 6M55 CR04 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 110 | 121306914 | Flat-rolled product of iron or non-alloy steel, plated or coated with zinc, of specification 50002-CR02, 50002-CR04, 50002-DPC420Y780T, 50002-LAC550Y620T or 5002-TRC400Y690T | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 111 | 121306914 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of specification 50002-LAC340Y410T | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 112 | 121306914 | Flat-rolled product of iron or non-alloy steel, clad, plated or coated, of specification 50002-LAC340Y410T, 50002-LAH340Y410T or 50002-LAH550Y620T | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 113 | 121306914 | Tube or pipe, welded, of circular cross-section, of other alloy steel, of specification 50002-DPC420Y780T | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 114 | 121306914 | Flat-rolled product of other alloy steel, not further worked than cold-rolled, of specification M2032 RP153-980 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 115 | 121306914 | Flat-rolled product of other alloy steel, of specification GN DQ AK or MS 6000 D 44A CHG AF | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 116 | 100355437 | Tube, pipe or hollow profile, of stainless steel, of circular cross-section, welded or seamless, of grade 304L, of specification SAE J405/ASTM A240 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 117 | 100355437 | Tube, pipe or hollow profile, of iron or non-alloy steel, welded, of circular cross-section, of grade 1008 or 1010, of specification TSG3150G/ASTM A513, SAE J403, SAE J525 or SAE J526 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 118 | 101238244 | Aluminum plates, sheets and strip, of alloy 2024, 6061 or any alloy of the 7000 series (including alloy 7040, 7050, 7055, 7075, 7150, 7175 or 7474) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 119 | 101238244 | Flat-rolled product, of grade Inconel 625 or Inconel 718 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 120 | 101238244 | Bar and rod, of grade Inconel 625 or Inconel 718 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 121 | 100618719 | Aluminum windows | For goods imported on October 27, 2018 | For imports recorded under the following transaction number (B3-3 Form):
|
| 122 | 897270096 | Aluminum doors or windows | From July 1, 2018 to July 31, 2018 | For imports recorded under the following transaction number (B3-3 Form):
|
| 123 | 105347918 | Bar and rod, not further worked than cold formed or cold finished, of other alloy steel, of 5150M grade steel | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 124 | 105347918 | Bar and rod, of iron or non-alloy steel, of SAEJ403 1050 grade steel | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 125 | 866465701 | Aluminum expansion joint covers | From August 3, 2018 to October 6, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 126 | 866465701 | Aluminum expansion joint covers (models SBP-4-8-SP, HDNBL-2-4G, 6GW-4-8G, SBPL-4-8-SP, NBAF-6G, HDNB-2-4, CMX-4-8, CMX-2-4, CMX-6, CMXL-2-6, CMXL-3-6 or CMXL-4-8) or fire barrier insulation fiber (models 2HFFB-12, 2HFFB-9, 2HWFB-12 or 2HWFB-9) | From July 1, 2018 to March 31, 2019 inclusive | Goods purchased to fulfill subcontract 40467-2797-C dated December 1, 2017 |
| 127 | 865908990 | Bar and rod, round, of grade 1215, of specification ASTM A29 or ASTM A108 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 128 | 865908990 | Bar and rod, round, of grade 1144 stress proof, of specification ASTM A29, ASTM A108 or ASTM A311 Class B | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 129 | 100174457 | Aluminum, doors or windows, and their frames | From July 8, 2018 to September 2, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 130 | 105507719 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated, of a thickness of less than 3 mm, hot dipped, Grade X | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 131 | 868987363 or 105507719 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, electrolytically plated or coated with zinc, of grade 40–60 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 132 | 868987363 or 105507719 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated with zinc, of a thickness exceeding 1 mm, galvanized, of grade 40-60 Series: 316/317/327/330/341/342/344/625/627/629-CR | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 133 | 105507719 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, of part codes 262587P-01-03 .315 X 15.35, MS 264<S>035SK CHG or MS 6000<D>44VA-080XK | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 134 | 105507719 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than cold-rolled (cold-reduced), of grade 60 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 135 | 868987363 or 105507719 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, galvanized, of grade 50-60 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 136 | 105507719 | Flat-rolled products of other alloy steel, of a width of 600 mm or more, galvanized, of grade 60 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 137 | 868987363 or 105507719 | Flat-rolled products of other alloy steel, galvanized, of grade 60 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 138 | 105507719 | Flat-rolled products of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled, of grade 50 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 139 | 105179758 | Bar and rod, Gray Iron and Ductile Iron Continuous Cast Dura-Bar, of grade 65-45-12, 80-55-06, 100-760-02 or 201-NI-RESIS | From July 1, 2018 to June 30, 2019 inclusive | |
| 140 | 122615503 | Single Walled Steel Tubing with 5% Aluminum Zinc Coating, meeting GM124M/GMW17334 requirements | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 141 | 122615503 | Plain Annealed Single Walled Steel Tubing, meeting GM124M/GMW17334 requirements | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 142 | 122615503 | Single Walled Cut to Length Steel Tubing with 5% Aluminum Zinc Coating, meeting GM124M/GMW17334 requirements | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 143 | 806775540 | Pipe, polymer lined carbon steel, of polymer liner PTFE (Polytetrafluoroethylene), PVDF (Polyvinylidene), PP (Polypropylene) or PFA (Perfluoroalkoxy) | From July 1, 2018 to February 28, 2019 inclusive | |
| 144 | 101400760 | Bar and rod, alloy solid steel bar, cold-rolled, of AMS or BMS specification | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 145 | 101400760 | Bar and rod, of stainless steel, hot-rolled, of AMS or BMS specification | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 146 | 101400760 | Bar and rod, of stainless steel, 321 Stainless Steel, of a diameter greater than 25mm, of AMS or BMS specification | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 147 | 101400760 | Aluminum alloy plate or billet, of AMS or BMS specification, of a thickness greater than 7mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 148 | 101400760 | Manifold Body Castings, of C355-T6 Aluminum | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 149 | 101400760 | Aluminum bar and rod, of specification AMS or BMS, of a diameter greater than 12.7 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 150 | 101400760 | Aluminum tubing, of alloy 7075 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 151 | 866460074 | Flat-rolled product, hot-rolled or cold-rolled, spheroidized and annealed, of grades J403 1045, J403 1050, J404 4140, J404 4130 or A506 4130 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 152 | 895418499 | Flat-rolled product of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated, of a thickness of 4.75mm or more, of specification SPH440-OD or SPH590-OD | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 153 | 895418499 | Flat-rolled product of iron or non-alloy steel, of a width of 600mm or more, cold-rolled, not clad, plated or coated, of a thickness exceeding 0.5mm but less than 3mm, of specification SPC270C, SPC270DU, SPC440, SPC590 or SPC590DU | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 154 | 131874299 | Structures and parts of structures, of aluminum, of model number 750-BL, 750-BR, 550-BL, 550-BR, OR-20, BIB14-MI, BIB14-ML or BIB14-BR | From July 1, 2018 to June 30, 2019 inclusive | |
| 155 | 894141241RM0003 | Flat-rolled product, of stainless steel, of a width of less than 600mm, not further worked than rolled, of part number 2144M5247-2 or 2144M5261-2 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 156 | 894141241RM0003 | Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of part number 22521-1, 22587-1, 161A2126-4, 51406-1 or CEVM 300M | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 157 | 894141241RM0003 | Aluminum castings, angles, shims, forge or sheets to be cut into shims, of part number 22573-1, 25207-1, 515Z3008-501W100R or 1003F6202C002 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 158 | 894141241RM0003 | Bar, flat or rectangle, not further worked than forged, of part number 161A1210-1 or 161A1210-2 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 159 | 894141241RM0003 | Bar and rod, not further worked than cold-formed or cold-finished, of part number 161A1311-1, 161A1128-3, 161A1128-4, 161A2111-9, 161A2122-1, 55-2381061-00, 25202-1, 1005731111-017 or 1159LM50159-13 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 160 | 894141241RM0003 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of aluminum alloy, of part number 4557100025-004, 491Z1661-1, 495Z5511-7-MOD3, GD437-1051-7, 85216815-001, GD417-1606-3, GM147-0156-3/-4, 511Z3134-1, 1003M6322L001, 55-2355018-00, 1003M4003C001, 55-5059007-00, GC413-1238-1, 511Z3125-1, 82710621-103, 2143A6218-2, 32326-1, 2144M5286-1, 511Z3087-501, CC670-12213-3, QQA-250/12, 85714635-103, 83910542-101, S-AL-7050, 85713505-103, S-AL-7075-T7351, 1002720041-001 or 1005210117-001 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 161 | 894141241RM0003 | Aluminum bar (Rectangular, Round or Square) or extrusions, of part number 85711616-102 or 85712210-101/-102 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 162 | 894141241RM0001 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade A286, 17-4 PH, 15-5 PH, 17-4 PH, 347, 304L, 303Se, 347 or 303 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 163 | 894141241RM0001 | Flat-rolled product, of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, of grade 4130, 1095, MIL-S-22499 or CO NETIC | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 164 | 894141241RM0001 | Flat-rolled product, of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled, of grade CO NETIC AA, CRES or AMIL-S-22499 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 165 | 894141241RM0001 | Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 625, 4130 or 4140 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 166 | 894141241RM0001 | Tube, of stainless steel, round, seamless, hot drawn, of grade 304 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 167 | 894141241RM0001 | Tube, round, seamless, hot drawn, of Grade 4130 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 168 | 894141241RM0001 | Aluminum bar (rectangular, round or square) or extrusions, of grade 2024, 2219, 6061, 7075, 6063, 15-5 PH, 7075, 7150, 7055, 7136 or 2224 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 169 | 894141241RM0001 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of grade 2024, 6061, 7075, 7475, 5052, 6013, 6061, 7140, 7175, S3-6 or 1100 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 170 | 894141241RM0001 | Formed aluminum can – tube with bottom, but no top, of grade 3003 or 1100 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 171 | 894141241RM0001 | Aluminum castings, angles, shims or sheets to be cut into shims, of grade 6063, 2024, 356, 17-4PH, 3003, A356 or 15-5PH | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 172 | 894141241RM0001 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section, of grade A286, 17-4 PH, 15-5 PH, 347, 304L, 303Se, 347 or 303 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 173 | 894141241RM0004 | Bar and rod, of part number R-ST-4330-4.000 DIA (alloy 4330), S-ST-4340-1.250 (alloy 4340) or S-ST-4340-1.250 X 2.000 (alloy 4340) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 174 | 894141241RM0004 | Semi-finished product of other alloy steel, of Part Number S-ST-4130-0.080 (alloy 4130) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 175 | 894141241RM0004 | Flat-rolled product, of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, Part Number R-ST-4340-1.750 DIA (alloy 4340) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 176 | 894141241RM0004 | Bar and rod, part number R ST 4340-1.750 DIA (alloy 4340), R ST-4130-0.375 DIA or R ST 4130 0.625 DIA (alloy 4130) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 177 | 894141241RM0004 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, Part Number: S-AL-7050-T7452-3.500, S-AL-7050-T7452-600) (alloy 7050) or S-AL-7050 (alloy 7050) (-T7452)-5.500X5.500 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 178 | 894141241RM0004 | Aluminum, castings, angles, shims, forge or sheet to be cut into shims, Part Number: C-#257T4401-3 alloy 356-T6, C-#2012B-2A-50 alloy 7175, C-#26211-1-CASTING alloy 7175-T74, C #40661-1 alloy 7175-T74, C-#40909-3 alloy 7175-T74, C-#46351-1-FORGING alloy 7075 or C #41 1211008-01 alloy 7075 - T7351 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 179 | 894141241RM0004 | Bar and rod, of iron or non-alloy steel, Part Number R-ST-4330-4.000 DIA (alloy 4330), S ST-4340-1.250 (alloy 4340) or S ST 4340 1.250 X 2.000 (alloy 4340) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 180 | 100869130 | Semi-finished product, of stainless steel, of rectangular (other than square) cross-section, of grade 13-8 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 181 | 100869130 | Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grades 13-8, 15-5 or 465 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 182 | 100869130 | Bar and rod, flat or rectangle, not further worked than forged, of grade 4330M | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 183 | 100869130 | Aluminum bar (rectangular, round or square) or extrusions, of grade 7075 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 184 | 100869130 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of grade 2024, 2124, 2219, 7050, 7075, or 7140 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 185 | 100869130 | Aluminum castings, angles, shims, forge, or sheets to be cut into shims, of grade 7050, 7075 or 356 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 186 | 804861284 | Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of grade 7175, 7475, 7050, 7075, 7010, 2024, 2124, 7040, 7140 or 7055 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 187 | 895418499 | Flat-rolled product, of iron or non-alloy steel, not clad, plated or coated, of grade SPC270A, SPC270C, SPC270DU, SPC440, SPC590, SPC590DU, SPH440-OD or SPH590 OD | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 188 | 895418499 | Flat-rolled product, of iron or non-alloy steel, clad, plated or coated, of grade SCGA270C-45, SCGA440-45, SCGA340HR-4 or SCGA340HR-45 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 189 | 895418499 | Flat-rolled product, of iron, non-alloy or other alloy steel, in coils, of grade SPH270C-OD, SPH270C-OF, SPH590FC OF, SPH590SF-OD, SPC980DU, SPC980DUB or SPC1180DUB | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 190 | 895418499 | Flat-rolled product, of iron, non-alloy or other alloy steel, clad, plated or coated, of grade SCGA1180DUB-45, SCGA270D-45, SCGA270DU-45, SCGA590DU-45, SCGA980DUB-45 or SCGA1180DUB-45 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 191 | 105468391 | Stainless steel wire, of a diameter of 0.188 inch, of grade 17-7 PH, of specification AMS 5678 CLASS C | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 192 | 105468391 | Stainless steel plate, of a thickness of 2.5 inches thick, of grade 15-5 PH, of specification AMS 5862 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 193 | 105468391 | Stainless steel rectangular bar, of specification AMS 5629 or 5643 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 194 | 105468391 | Wire of stainless steel, part number MS20995C32 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 195 | 105468391 | Stainless steel bar, of a diameter of 3.5 inches, of grade 4330, of specification AMS 6427 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 196 | 105468391 | Aluminum bars, rods and profiles, of aluminum alloys, of specification AMS-QQ-A-200/3, AMS QQ A 200/3.19, AMS-QQ-A-200/11, AMS-QQ-A-200/15 or AMS-QQ-A-250/12 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 197 | 105468391 | Aluminum plates, sheets and strip, of aluminum alloys, of specification AMS 4050, AMS 4078, AMS 5862, AMS-QQ-A-250/4, AMS-QQ-A-250/5, AMS QQ A-250/12, BAMS 516-002, AMS 516-003 or BAMS 7-323 TYPE 1 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 198 | 105468391 | Other articles of aluminum, of the following descriptions and part numbers: nuts (BACC30M6, NAS1195DD3XH or NAS463XDD10), rivets (B0205017AD3-3.5S, BACR15BA3AD4C, BACR15BA4D4C, MS20426AD4-5, MS20470AD4-5A or NAS9302BNS-4-02), washers (BACS53B1EA2, NAS1149C0416R, NAS1149D0416H, NAS1149D0432K or NAS1149D1016K) or stand-offs (B0204040AL-18W) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 199 | 883281107 | Flat-rolled product, cold-rolled annealed, in coils, with percentage of chromium, molybdenum or manganese lower than standard for Grade 4140 or 4142 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 200 | 103333662 | Bar and rod, cold-rolled, turned and polished, of 1045 grade steel, part number H200501400 or H200503600 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 201 | 100234301 | Bars and rods of other alloy steel, of grade 4140, 4145, 4330V, EN30B, PremoMax or 8620, of a diameter from 0.5 inch to 20 inches inclusive | For goods imported on or after July 1, 2018 | |
| 202 | 100234301 | Bars and rods, of stainless steel, of grade high strength austenitic non-magnetic stainless steel 1515HS, 1515C, Datalloy, DNM-140 or Nitronic, of a diameter from 1 inch to 15 inches inclusive | For goods imported on or after July 1, 2018 | |
| 203 | 100234301 | Bars and rods, of stainless steel, of grade 317 or 347 or SCF19, of a diameter from 0.75 inch to 3 inches inclusive | For goods imported on or after July 1, 2018 | |
| 204 | 801135500 | Flat-rolled pressure vessel quality plate, not further worked than hot-rolled, of grade ASME SA-285-C | For goods imported on or after July 1, 2018 | Imported for sale to company with business number 100569987 |
| 205 | 891784126 | Concrete reinforcing bar, of grade 60, of specification ASTM A615/A615M, of a length of 300 mm to 850 mm inclusive, of a diameter from 15 mm to 30 mm inclusive | For goods imported on or after July 1, 2018 | |
| 206 | 891784126 | Concrete reinforcing bar, of grade 60, of specification A615/A615M, bent into an L shape with one length of 130 mm to 240 mm inclusive and the other length of 250 mm, of a diameter from 15 mm to 30 mm inclusive | For goods imported on or after July 1, 2018 | |
| 207 | 103872651 | Cold drawn bar, of grade 8620, with a diameter of up to 1.0625 inches, of minimum yield strength of 75,000 psi, of a hardness of 90 HRB to 26 HRC | For goods imported on or after July 1, 2018 | |
| 208 | 104402078 or 809569957 | Hot-rolled plate, of grade CSA G40.21 350AT Cat 3, of a thickness of more than 1.5 inches, of a width of more than 116 inches, of a length of more than 580 inches | For goods imported on or after July 1, 2018 | Goods purchased under quote notice 18-0027 dated March 1, 2018 for project number 37195-0001 |
| 209 | 846855336; 144455847; 871196416; 782632293; or 809935364 | Flat-rolled product, not further worked than hot-rolled, of grade SA-517-B, quenched and tempered, of a thickness from 0.25 inches to 0.45 inches inclusive, of a width from 90 inches to 120 inches inclusive, of a length from 273 inches to 445 inches inclusive | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 210 | 846855336; 144455847; 871196416; 782632293; or 809935364 | Flat-rolled product, not further worked than hot-rolled, of grade SA-517-E, quenched and tempered, of a thickness from 0.25 inches to 1.750 inches inclusive, of a width from 96 inches to 120 inches inclusive, of a length from 280 inches to 454 inches inclusive | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 211 | 846855336; 144455847; 871196416; 782632293; or 809935364 | Flat-rolled product, not further worked than hot-rolled, of grade SA-612 or SA-612N, quenched and tempered, of a thickness from 0.492 inches to 0.721 inches inclusive, of a width from 101 inches to 121 inches inclusive, of a length from 253 inches to 417 inches inclusive | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 212 | 807325279 or 105497242 | Round, Keystone and House shaped stainless steel wire, of grade 304L or 316L, annealed and cold rolled, of a width from 0.045 inches to 0.190 inches or of a diameter from 0.052 inches to 0.250 inches inclusive, of a height from 0.060 to 0.380 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 105497242 |
| 213 | 102521416 | Stainless steel ingots of alloy 17-4, 304, 347 or GX-4 | From July 1, 2018 to June 30, 2019 inclusive | |
| 214 | 895418499 | Flat-rolled product of iron, non-alloy or other alloy steel, of specification SPC 440, SPH440, SPH590, SCGA270C, SCGA270D, SCGA270DV, SCGA340, SCGA440, SCGA590, SCGA980, SCGA 1100, SPC270C, SPC270D or SPC980 | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 105336598 |
| 215 | 104994397 | Flat-rolled product, of iron, non-alloy or other alloy steel, clad, plated or coated, of specification HR550LA-70G&70G-G1, ASTM A463M, GM6178M, WSD-M1A295-A3 or SCGA270D-45 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 216 | 104994397 | Aluminum plates, sheets and strip, of alloy AA5052-O/15935-AL-S-5000A, AA5052-H32 or SAE-J2340-340X | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 217 | 101603405 | Flat-rolled product, of iron or non-alloy steel, of specification SPH590-OD, GMW3032M-ST-S-HR550LA, 50002-340Y470T, MS264, SPH270C-OD, SPH440-OD, SPH590-OD, WSS-M1A365-A20 or WSS-M1A367-A46 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 218 | 101603405 | Flat-rolled product of iron or non alloy steel, clad, plated or coated, of specification SHGA270C-45, 50001- PHS950Y1300T, 50002-LAC340Y410T, 50002-LAC380Y450T, MS6000-44VA-355K, 50002-CR02-ELECTROGLAV GI 60/60 U, 50002-LAC550Y620T, 50002-LAH550Y620T or 50000- CR02-HDGALVANIZED GI 60/60 U | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 219 | 101603405 | Flat-rolled product of other alloy steel, of specification MS264, MS67, 50001-PHS950Y1300T, GMW3399M-STY-S-CR980T/700MP, WSS-M1A357-A1, GMW14400M-ST-S-HS1300T/950Y, 50002-LAC340Y410T, SPH270C-OD or SPH590-OD | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 220 | 710327693 | Flat-rolled product of grade 350 AT, of specification CSA G40.21 | From July 1 2018 to August 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 221 | 710327693 | Flat-rolled product of grade 350 AT or 350 WT, of specification CSA G40.21 | From July 1, 2018 to September 30, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 222 | 104402078 or 809569957 | Hot-rolled plate, of grade CSA G40.21 350AT Cat 3, of a thickness from 0.5 inch to 2 inches inclusive, of a width from 95 inches to 124 inches, of a length of 554 inches to 954 inches inclusive | From July 1, 2018 to December 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 223 | 103823704 | Flat-rolled product of iron or non-alloy steel, coated with zinc, of specification MS50002.LAC240Y320T (cold rolled) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 224 | 103823704 | Flat-rolled product of iron or non-alloy steel, coated with zinc, of specification MS50002.LAH240Y320T (hot rolled) or MS50002.LAH340Y410T (hot rolled) | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 225 | 119873420 | Flat-rolled product of other alloy steel, cold-rolled, galvannealed, plated or coated with zinc, of specification MS6000-44VA | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 226 | 119873420 | Flat-rolled product of other alloy steel, cold-rolled, dual phase, galvanized, of specification MS50002 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 227 | 105120190 | Flat bar, of grade A572-50, of a thickness of 3 inches, of a width of 4 inches | For goods imported on or after July 1, 2018 inclusive | For use in the manufacture of original equipment parts or other parts |
| 228 | 105120190 | Flat bar, of grade A36, of a thickness of 2 inches, of a width of 2.25 inches | For goods imported on or after July 1, 2018 inclusive | For use in the manufacture of original equipment parts or other parts |
| 229 | 105492664 | Stainless steel, in coils, aluminized | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 230 | 104708409 | Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 231 | 104708409 | Aluminum plates, sheets and strip, of specification GMW15192M-AL-S-6000-R-110-U | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 232 | 104546718 | Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 233 | 887356392 | Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 234 | 887356392 | Flat-rolled product, galvanized, of specification GMW3032M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 235 | 817808496 | Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S-CR420LA | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 236 | 100755628 | Ingots, of other alloy steel | For goods imported on or after July 1, 2018 inclusive | For goods ordered under one of the following purchase orders:
|
| 237 | 100755628 | Ingots, of non-alloy steel | For goods imported on or after July 1, 2018 inclusive | For goods ordered under one of the following purchase orders:
|
| 238 | 100755628 | Ingots, of other alloy or stainless steel | From July 1, 2018 to September 30, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 239 | 136523859 | Aluminum Louvres | From July 1, 2018 to November 30, 2018 inclusive | For imports recorded under the transaction number 13409534033114 (B3-3 Form) |
| 240 | 862901691 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, of grade Duplex 2304 | From July 1, 2018 to December 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 241 | 809569957 | Flat-rolled product of grade 350 AT | From July 1, 2018 to December 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 242 | 141718262 | Flat-rolled product, of non-alloy steel, of grade 50AT CAT.2, 350AT CAT.2, 50 AT CAT.3 or 350AT CAT.3, of specification ASTM A6 or CSA G40.21 | From July 1, 2018 to December 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 243 | 141718262 | Flat-rolled product, of grade A572 | From July 1, 2018 to December 31, 2018 inclusive | For imports recorded under the transaction number 11197004223018 (B3-3 Form) |
| 244 | 863402731 | Flat-rolled product, of non-alloy steel, of grade 50AT CAT.2, 350AT CAT.2, 50 AT CAT.3 or 350AT CAT.3, of specification ASTM A6 or CSA G40.21 | From July 1, 2018 to December 31, 2018 inclusive | Goods imported for sale to company with business number 141718262 and ordered under purchase order number 85563, 85565 or 85566 |
| 245 | 101980753 | Flat-rolled product of iron or non-alloy steel, hot-rolled, of specification GMW2M-ST-S, GMW3032M-ST-S, GMW3399M-ST-S or SAEJ2340 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 246 | 101980753 | Flat-rolled product of iron or non-alloy steel, cold-rolled, of specification GMW2M-ST-S, GMW3032M-ST-S or GMW3399M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 247 | 101980753 | Flat-rolled product of iron or non-alloy steel, galvanized or electrogalvanized, of specification GMW2M-ST-S, GMW3032M-ST-S or GMW3399M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 248 | 101980753 | Flat-rolled product of other alloy steel, hot-rolled or cold-rolled, of specification GMW2M-ST-S, GMW3032M-ST-S, GMW3399M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 249 | 101980753 | Flat-rolled product of other alloy steel, galvanized, electrogalvanized, clad, plated or coated, of specification GMW2M-ST-S, GMW3032M-ST-S, GMW3399M-ST-S, GMW14400M-ST-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 250 | 101980753 | Tube of iron, non-alloy or other alloy steel, welded | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 251 | 101980753 | Aluminum sheet of specification GMW15192M-AL-S | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 252 | 101980753 | Rivets, bolts, nuts, rings, washers, screws and similar articles of aluminum | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 253 | 104708409 | Aluminum flat bars, round bars or extrusions, of alloy 6061-T6511 | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896860590 |
| 254 | 105213755 | Wire of stainless steel, cold finished, of type 314, 330cb or 35/19cb, of a diameter less than 0.5 inch | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 255 | 105412845 | Flat-rolled product, of iron, non-alloy or other alloy steel, hot-rolled, of grade 050 XF, 060XF, 070 XF or 080XF, of a width less than 600 mm, of a thickness of 5.5 mm or less | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 256 | 105412845 | Flat-rolled product, of iron, non-alloy or other alloy steel, hot-rolled, of grade 1006, 1008 or 1010, of a width less than 600 mm, of a thickness of 5.5 mm or less | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 257 | 105412845 | Flat-rolled product, of iron, non-alloy or other alloy steel, hot-rolled, of grade 340 XF, 400XF, 420XF, 490XF or 550 XF, of a width less than 600 mm, of a thickness of 5.5 mm or less | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 258 | 105412845 | Flat-rolled product, of iron, non-alloy or other alloy steel, hot-rolled, of grade MS00026, of a width less than 600 mm, of a thickness of 5.5 mm or less | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 259 | 105412845 | Flat-rolled product, of iron, non-alloy or other alloy steel, cold-rolled, of grade MS00025, of a width less than 600 mm, of a thickness of 5.5 mm or less | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 260 | 105412845 | Flat-rolled product, of iron, non-alloy or other alloy steel, cold-rolled, of grade 40 MOD, 1055 or 4130, of a width less than 600 mm, of a thickness of 5.5 mm or less | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 261 | 105412845 | Wire, of iron or non-alloy steel, of a diameter of 0.079 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 262 | 103648721 | Aluminum extrusion, of alloy 6063-T6, of a length from 4 meters to 8 meters inclusive | For goods imported on or after July 1, 2018 | Goods ordered under purchase order number:
|
| 263 | 827413949 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1074 SAE J403, of a thickness of up to 3.7 mm inclusive, of a width of up to 250 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 264 | 827413949 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1020 SAE J403, of a thickness of up to 3.7 mm inclusive, of a width up to 250 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 265 | 827413949 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 060 SAEJ1392 or 420XF-SAEJ2340, of a thickness of up to 4.5 mm inclusive, of a width of up to 275 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 266 | 827413949 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1010 SAE J403, of a thickness up to 2.5 mm inclusive, of a width of up to 250 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 267 | 827413949 | Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, of grade 1045 SAE J403, of a thickness of up to 4 mm inclusive, of a width of up to 250 mm inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 268 | 104708409 | Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1050, of a thickness from 0.0758 inch to 0.111 inch inclusive, of a width from 6.97 inches to 10.2 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 827413949 |
| 269 | 104708409 | Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1075, of a thickness from 0.157 inch to 0.181 inch inclusive, of a width of 5.325 inches | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 827413949 |
| 270 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1074 SAE J403, of a thickness of up to 0.04 inch inclusive, of a width of 9.25 inches | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 827413949 |
| 271 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1010 SAE J403, annealed, of a thickness from up to 0.09 inch inclusive, of a width of 6.97 inches | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 827413949 |
| 272 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1020 SAE J403, of a thickness of up to 0.08 inch inclusive, of a width of 8.35 inches | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 827413949 |
| 273 | 102466950 | Aluminum sheet of alloy 2024, 2219, 5052, 6013, 6061 or 7075, of a thickness from 0.012 inch to 0.2 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 274 | 102466950 | Aluminum plate of alloy 2024, 6061, 7050, 7075 or 7475, of a thickness from 0.25 inch to 5 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 275 | 102466950 | Aluminum bar, of alloy 2024, 6061 or 7075, of a cross-section of 0.5 inch to 3 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 276 | 102466950 | Aluminum extrusion of alloy 2024, 2219, 6061, 7075 or 7150 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 277 | 102466950 | Aluminum rivets, screws, bolts, nuts and similar articles, of alloy 2024 or 6061 | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 278 | 102466950 | Flat-rolled product, cold-rolled, of grade 301, 302, 321, 347, 4130, 15-5PH, 17-7PH, 17-4PH or A289, of a thickness from 0.018 inch to 0.128 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 279 | 102466950 | Bars and rods, of grade 303, 304, 4340 or 17-4PH, of a cross-section from 0.625 inch to 1.75 inches inclusive | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 280 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification UMG 1035 spheroidized and annealed, of a thickness from 0.0984 inch to 0.126 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896543659 |
| 281 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification UMG 1050 spheroidized and annealed, of a thickness from 0.0984 inch to 0.122 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896543659 |
| 282 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification NES M2021 SP231-440, of a thickness from 0.0748 inch to 0.0866 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896543659 |
| 283 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification SAEJ1392 050XF, of a thickness from 0.0551 inch to 0.063 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896543659 |
| 284 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification MS-264 080XF, of a thickness from 0.0984 inch to 0.1063 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896543659 |
| 285 | 104708409 | Flat-rolled product of iron or non-alloy steel, in coils, hot-rolled, of specification Toyota TSG31016 SPH440-OD, of a thickness from 0.0866 inch to 0.0945 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 896543659 |
| 286 | 101865749 | Flat-rolled product, of specification LAC240Y320T GI 60/60 U, of a nominal thickness of 2.2 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 287 | 101865749 | Flat-rolled product, of specification LAH240Y320T GI 60/60 U, of a nominal thickness of 1.8 mm or 3 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 288 | 101865749 | Flat-rolled product, of specification LAC340Y410T GI 60/60 U, of a nominal thickness of 1.8 mm or 2.2 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 289 | 101865749 | Flat-rolled product, of specification LAH340Y410T GI 60/60 U, of a nominal thickness of 3 mm or 4 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 290 | 101865749 | Flat-rolled product, of specification LAH550Y620T GI 60/60 U, of a nominal thickness of 3 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 291 | 104708409 | Flat-rolled product, hot-rolled, of specification SAE J2340 420 XF, of a thickness from 0.165 inch to 0.1731 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 867203804 |
| 292 | 104708409 | Flat-rolled product, hot-rolled, of specification WSS-M1A346 Grade 5, of a thickness from 0.1397 inch to 0.1437 inch inclusive | From July 1, 2018 to June 30, 2019 inclusive | Goods imported for sale to company with business number 867203804 |
| 293 | 867888109 | Aluminum plates, sheets and strip, of alloy 2024, 6061 or any alloy of the 7000 series (including alloy 7010, 7040, 7050, 7055, 7075, 7150, 7175 or 7474), of a thickness exceeding 0.2 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 294 | 867888109 | Aluminum castings, angles, shims, forge or sheets to be cut into shims | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 295 | 867888109 | Other articles of aluminum, including bolts, rivets or washers, of a kind used in aerospace application | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 296 | 868088089 | Special bar quality (SBQ) carbon steel bar, in coils, of grade AISI 1536, 3130, 4120, 4320 or 4330, of a diameter from 0.8125 inch to 1.125 inches inclusive | From July 1, 2018 to April 30, 2019 inclusive | |
| 297 | 881231807 | Flat-rolled product, hot-rolled, in coils, of specification TSG 3101G SPH590-OD, of a nominal thickness of 2.6 mm, of a width of 1,201 mm | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 298 | 119457869 | Carbon steel pipe, longitudinally welded, of an outside diameter of 41 inches, 48 inches or 53 inches, of a length of 40 feet, conforming to standard AWWA C200 | For goods imported on or after July 1, 2018 | Goods purchased under Request for Supplier Qualifications No. 18-016 |
| 299 | 122791510 | Flat-rolled product, of specification 50001-PHS950Y1300T, of a nominal thickness of 0.0475 inch or 0.0625 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 300 | 122791510 | Flat-rolled product, of specification 50002-LAC340Y410T, of a nominal thickness of 0.0475 inch, 0.059 inch or 0.079 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 301 | 122791510 | Flat-rolled product, of specification 50002-LAH550Y620T, of a nominal thickness of 0.1185 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 302 | 122791510 | Flat-rolled product, of specification 50002-CR01, of a nominal thickness of 0.0585 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 303 | 122791510 | Flat-rolled product, of specification 50002-LAC240Y320T, of a nominal thickness of 0.0585 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 304 | 122791510 | Flat-rolled product, of specification 50002-DPC420Y780T, of a nominal thickness of 0.0475 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 305 | 122791510 | Flat-rolled product, of iron, non-alloy or other alloy steel, aluminized boron, of a nominal thickness of 0.0625 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 306 | 122791510 | Flat-rolled product, of specification GN 50XK, of a nominal thickness of 0.122 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 307 | 737270728 | Tube or hollow profile, welded, of circular cross-section, of other alloy steel | From July 1, 2018 to December 31, 2018 inclusive | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 308 | 896543659RM0014 | Flat-rolled product, of other alloy steel, hot-rolled, pickled and oiled, of grade SAE J1392-050 YHF, of a thickness of 0.118 inch or 0.124 inch | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 309 | 817313737 | Aluminum profiles, aluminum doors, windows and their frames, or cloth, grill, netting and fencing, of aluminum wire | For goods imported on or after July 1, 2018 | For imports recorded under one of the following transaction numbers (B3-3 Form):
|
| 310 | 859363764 | Bar and rod, of grade 1537M, 4119M or 4318M, of a diameter from 19.05 mm to 30.16 mm inclusive | For goods imported on or after July 1, 2018 | For use in the manufacture of original equipment parts or other parts |
| 311 | 104040183 | Bar and rod, of specification A36 or A529, of grade 50, 44W or 50 W, of a diameter of 0.75 inch, 1 inch or 1.25 inch | For goods imported on or after July 1, 2018 | Goods imported for sale to company with business number 119382679 |
| 312 | 124108564 | Flat-rolled product of iron, non-alloy steel or other alloy steel, hot-rolled, of grade DQSK, JSH270C, JSH440W or JSH590R | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 313 | 124108564 | Flat-rolled product of iron, non-alloy steel or other alloy steel, cold-rolled, of grade CRDF140T, DF140, DQSK, JSC270C, JSC270F, JSC440W, JSC590R, JSC780Y or JSC980YL | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
| 314 | 124108564 | Flat-rolled product of iron, non-alloy steel or other alloy steel, galvannealed, of grade JAC270C, JAC270D, JAC270E, JAC270F, JAC340H, JAC440W, JAC570C, JAC590R, JAC590Y, JAC780T, JAC780Y, JAC980YL or JAH440W | From July 1, 2018 to June 30, 2019 inclusive | For use in the manufacture of original equipment parts or other parts |
- SOR/2018-289, s. 3
- SOR/2019-104, s. 1
- SOR/2019-104, s. 2
- SOR/2019-104, s. 3
- SOR/2019-104, s. 4
- SOR/2019-104, s. 5
- SOR/2019-104, s. 6
- SOR/2019-104, s. 7
- SOR/2019-104, s. 8
- SOR/2019-104, s. 9
- SOR/2019-104, s. 10
- SOR/2019-104, s. 11
- SOR/2019-104, s. 12
- SOR/2019-104, s. 13
- SOR/2019-104, s. 14
- SOR/2019-104, s. 15
- SOR/2019-104, s. 16
- SOR/2019-104, s. 17
- SOR/2019-104, s. 18
- SOR/2019-104, s. 19
- SOR/2019-104, s. 20
- SOR/2019-104, s. 21
- SOR/2019-104, s. 22
- SOR/2019-104, s. 23
- SOR/2019-104, s. 24
- SOR/2019-104, s. 25
- SOR/2019-104, s. 26
- SOR/2019-104, s. 27(E)
SCHEDULE 4(Subsection 2(2))
| Column 1 | Column 2 | |
|---|---|---|
| Item | Tariff Item | Description of Goods |
| 1 | 4412.39.00 | Other, with both outer plies of coniferous wood, for use in Canadian manufactures |
| 2 | 4811.59.00 | Other, for use in Canadian manufactures |
| 3 | 8903.10.00 | Inflatable |
| 4 | 8903.91.00 | Sailboats, with or without auxiliary motor |
| 5 | 8903.92.00 | Motorboats, other than outboard motorboats |
| 6 | 8903.99.90 | Other |
- SOR/2018-289, s. 3
- Date modified: