United States Surtax Remission Order
Version of the schedule from 2019-06-25 to 2024-10-14:
SCHEDULE 2(Subsection 1(1) and paragraph 1(2)(b))
| Column 1 | |
|---|---|
| Item | Description of Goods |
| 1 | Flat-rolled product, not further worked than hot-rolled, of grade 1037, of a minimum width of 47.375 inches |
| 2 | Flat-rolled product, cold-rolled, spheroidized, annealed, of grade 4130 |
| 3 | Flat-rolled product, cold-rolled, annealed spring steel, of grade SAE 1095 |
| 4 | Flat-rolled product, cold-rolled, in coils, spheroidized annealed, of grade 10B21 |
| 5 | Flat-rolled product, galvannealed, of grade HSLA 70, of a minimum width of 44.125 inches |
| 6 | Flat-rolled product, galvanized, of grade HSLA 70, of a minimum width of 43.29 inches |
| 7 | Flat-rolled product, annealed spring steel of grade C1070 CR |
| 8 | [Repealed, SOR/2019-262, s. 22] |
| 9 | Flat-rolled product, cold-rolled, of AISI 1055 carbon steel |
| 10 | Flat-rolled product, cold-rolled, annealed strip steel, of grade C1050 |
| 11 | Bar and rod of grade AISI 52100 |
| 12 | I-section beams of iron or non-alloy steel |
| 13 | Unequal leg angles with dimensions exceeding 7 inches by 4 inches by 0.5 inch, of iron or non-alloy steel |
| 14 | Angle, shape and section, MC channels of a depth exceeding 3 inches |
| 15 | Angle, shape and section, C channels of imperial size exceeding C 12 inches by 25 lbs/ft |
| 16 | Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 201, 304, 316, 321, 327, 409, 420, 430 or 450 |
| 17 | Flat-rolled product, clad, plated or coated, of grade 4140 |
| 18 | Flat-rolled product, clad, plated or coated, of grade 4142 |
| 19 | Bar and rod, not further worked than cold-formed or cold-finished, of grade AMS 6425 |
| 20 | Pipe and tube, seamless, of grade AISI 1026 |
| 21 | Pipe and tube, seamless, of grade AISI 1045 |
| 22 | Pipe and tube, of grade AISI 1526M |
| 23 | Pipe and tube, seamless, of grade 4140, of circular cross-section |
| 24 | Pipe and tube, seamless, of grade 4142, of circular cross-section |
| 25 | Pipe and tube, of grade 4140, vacuum degassed, of a minimum yield strength of 80,000 psi, of outside diameter from 3.25 inches to 8 inches inclusive |
| 26 | Pipe and tube, welded, of circular cross-section, of grade AISI 1526 |
| 27 | Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 2 inches by 1.5 inches, of grade CSA G40.21, ASTM A252 or ASTM A500 |
| 28 | [Repealed, SOR/2019-262, s. 23] |
| 29 | [Repealed, SOR/2019-262, s. 23] |
| 30 | [Repealed, SOR/2019-262, s. 23] |
| 31 | [Repealed, SOR/2019-262, s. 23] |
| 32 | Flat-rolled product, not further worked than hot-rolled, of grade CSA G40.21 350W or CSA G40.21 350W Category 1, of a thickness of 3.27 inches or 3.50 inches, of a width of 72 inches or 76 inches, of a length of 544 inches, 550 inches or 552 inches |
| 33 | Hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.25 inches, of a width of 96 inches, of a length of 240 inches or 288 inches |
| 34 | Hot-rolled abrasion resistant plate, of grade 200, of a thickness from 0.3125 inch to 0.313 inch inclusive, of a width of 120 inches, of a length of 240 inches or 288 inches |
| 35 | Hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.625 inches, of a width of 96 inches, of a length of 240 inches or 288 inches |
| 36 | Flat-rolled product, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm, of a thickness of 1.2 mm |
| 37 | Flat-rolled product, not further worked than cold-rolled, of grade HSLA 80, of a minimum thickness of 0.0756 inch, of a width of 51.975 inches |
| 38 | Flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.022 inch, of a width of 52.46 inches |
| 39 | Flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.037 inch, of a width of 40.34 or 47.695 inches |
| 40 | Flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.0377 inch, of a width of 44 inches |
| 41 | High carbon cold rolled-strip, full hard and oscillated coils, of grade SAE 1035, of a thickness of 0.055 inch, of a width of 0.75 inches |
| 42 | Flat-rolled product of iron or non-alloy steel, spheroidized and annealed, of grade SAE J403 C1050 or C1050 SA, of a thickness from 2.9mm to 7.1mm inclusive, of a width from 33.78 mm to 245 mm inclusive |
| 43 | Special Bar Quality (SBQ) bars, of grade AISI C-1536, A-4623-M, C-1541-VM, OP15, A-4320-M, A-4138-M, A-4330-M or A-4142-M, of chemical analysis in accordance with ASTM A751, of tensile strength in accordance with ASTM A370, of hardness in accordance ASTM E18, of a diameter from 0.625 inches to 1.5 inches inclusive, of a length from 25 feet to 30.2 feet inclusive |
| 44 | Round bar, of grade C1045, of a diameter from 0.375 inch to 10 inches inclusive, turned, ground and polished (TG&P), of a minimum tensile strength of up to 100,000 psi |
| 45 | Round bar, of grade C1045, turned and polished (TP), of a diameter of 0.375 inch to 10 inches inclusive |
| 46 | Bar and rod, of grade 1537M, 4119M or 4318M, of a diameter from 19.05 mm to 30.16 mm inclusive |
| 47 | Bar and rod, of grade 4330, 4330M or 4330NiMo5VCa4, of minimum yield strength of up to 165,000 psi inclusive, of a diameter from 1 inch to 4.062 inches inclusive |
| 48 | Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4330V MOD, of an outside diameter of 2.5 inches or 3.25 inches |
| 49 | Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4145H MOD, of an outside diameter of 2.875 inches |
| 50 | Angle, of iron or non-alloy steel, L section, not further worked than hot-rolled, hot-drawn or extruded, of grade A588-B, of a height of less than 3.15 inches, of leg dimensions of 3 inches by 2.5 inches, of a thickness of 0.375 inch, of a length of 20 feet |
| 51 | Aluminum bars, rods and profiles, of aluminum alloy AA2024 or AA2196 |
| 52 | Flat-rolled product of iron or non-alloy steel, not in coils, of grade ASTM A1011 HSLAS-F Grade 80, of a thickness from 0.071 inch to 0.079 inch inclusive, of a width of up to 20 inches, of a length of up to 120 inches |
| 53 | Cold drawn round bar of alloy steel, of grade AISI 4140, of specification ASTM A193, ASTM A320 or MS-101, of a diameter from 0.446 inch to 2.914 inches inclusive |
| 54 | Bar of plain carbon steel, hot-rolled, in irregularly wound coils or not, of specification G30.18 400R, of an outside diameter from 10 mm to 35 mm inclusive, of a yield strength of 400 MPa, of a tensile strength of 540 MPa |
| 55 | Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, of grade SAE 1035 modified, of a thickness from 0.098 inch to 0.118 inch, of a width from 40 inches to 51.5 inches inclusive |
| 56 | Flat-rolled product, hot-rolled, of specification JSH270E, of a thickness of 0.0985 inch |
| 57 | Flat-rolled product, cold-rolled, of specficiation GMW3032M-ST-S CR210B2, of a thickness of 0.0614 inch |
| 58 | Flat-rolled product, cold-rolled, of specification GMW2M CR5, of a minimum thickness of 0.055 inch or 0.06 inch |
| 59 | Flat-rolled product, cold-rolled, of specification J403 10B21, of a minimum thickness of 0.079 inch or 0.115 inch or of a nominal thickness of 0.12 inch |
| 60 | Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR420LA, of a minimum thickness of 0.035 inch |
| 61 | Flat-rolled product, galvanized, of specification J2340 490XF, of a minimum thickness of 0.0448 inch or 0.074 inch or of a nominal thickness of 0.079 inch, 0.09 inch or 0.094 inch |
| 62 | Flat-rolled product, galvannealed, of specification A653 HSLAS Grade 70, of a minimum thickness of 0.045 inch |
- SOR/2018-289, s. 3
- SOR/2019-262, s. 22
- SOR/2019-262, s. 23
- SOR/2019-262, s. 24
- SOR/2019-262, s. 25
- SOR/2019-262, s. 26
- Date modified: