ARCHIVED - China Surtax Remission Order (2024)

This Web page has been archived on the Web.

Table of Contents

Version of document from 2025-10-15 to 2026-01-29:

China Surtax Remission Order (2024)

SOR/2025-12

CUSTOMS TARIFF

Registration 2025-01-31

China Surtax Remission Order (2024)

P.C. 2025-54 2025-01-31

Her Excellency the Governor General in Council, on the recommendation of the Minister of Finance, makes the annexed China Surtax Remission Order (2024) under section 115Footnote ^a of the Customs TariffFootnote ^b.

Return to footnote ^aS.C. 2005, c. 38, par. 145(2)(j)
Return to footnote ^bS.C. 1997, c. 36

Remission

Marginal note:Remission

1 (1) Subject to subsection (2), remission is granted of surtaxes paid or payable under the China Surtax Order (2024) in respect of the goods referred to in Schedule 1 or 2.
Marginal note:Conditions
(2) Remission referred to in subsection (1) is granted on the following conditions:
- (a) in the case of a good referred to in Schedule 1
  - (i) it is not the subject of an order or finding, as defined in subsection 2(1) of the Special Import Measures Act, on the date of importation, and
  - (ii) it is imported into Canada during the period beginning on October 22, 2024 and ending on December 31, 2025;
- (b) in the case of a good referred to in column 3 of Schedule 2 that is classified under the tariff item listed in column 2, it is imported into Canada by an importer listed in column 1 during the period specified in column 4, and any other applicable condition listed in column 5 is met;
- (c) no other claim for relief of the surtax has been granted under the Customs Tariff in respect of the good;
- (d) the good is not subsequently exported to the United States in the same condition in which it was imported; and
- (e) the importer makes a claim for remission to the Minister of Public Safety and Emergency Preparedness within two years after the date of importation.

SOR/2025-114, s. 1

Coming into Force

Marginal note:Registration

2 This Order comes into force on the day on which it is registered.

SCHEDULE 1(Subsection 1(1) and paragraph 1(2)(a))

Item	Tariff Item	Description of Goods
	Column 1	Column 2
1	7210.12.00	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated, or coated with tin, of a thickness of less than 0.5 mm
2	7210.70.00	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, painted, varnished, or coated with plastics
3	7212.10.00	Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, plated, or coated with tin
4	7219.22.00.10	Stainless steel plates, hot-rolled, not in coils, of a thickness of at least 4.75 mm but not exceeding 10 mm, of a width of 600 mm or more but not exceeding 1,830 mm
5	7219.23.00	Stainless steel sheets and plates, hot-rolled with 2B finish, of type 304 or 304L, with 11 gauge thickness, width of 5 feet, length of 20 feet, of specification ASTM A240
6	7219.23.00	Stainless steel sheets and plates, hot-rolled with 2B smooth finish, of type 304 or 304L, with 11 gauge thickness, width of 6 feet, length of 12 feet, of specification ASTM A240
7	7219.31.00	Stainless steel sheets and plates, cold-rolled with 2B smooth finish, of type 304 or 304L, with 3/16 inch thickness, width of 5 feet, length of at least 10 feet but not exceeding 20 feet, of specification ASTM A240
7.1	7219.33.00.10	Polished stainless steel coils and sheets of the following grades and finishes: – grade 304, finish No. 4 – grade 316, finish No. 2B – grade 316, finish No. 4 – grade 304, finish BA1
7.2	7219.33.00.90	Polished stainless steel coils and sheets of grades 304 or 430 and finish No. 4
7.3	7219.34.00.10	Polished stainless steel coils and sheets of grade 304 and finish No. 4
7.4	7219.34.00.90	Polished stainless steel coils and sheets of grade 430 and finish No. 4
8	7220.20.00	Flat-rolled stainless steel products, with a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), for use in the production of goods classified under tariff item 7310.10.00
9	7222.19.00.21	Stainless steel flat bars, not further worked than hot-rolled, hot-drawn, or extruded
10	7222.20.00	Stainless steel metric round bars, of type 304, cold-rolled, h9 tolerance, with an outer diameter of 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 50 mm or 60 mm, of specification ASTM A276
10.1	7222.20.00.91	Stainless steel bars and rods, not further worked than cold-formed or cold-finished, of grade 304 or 304L
11	7222.30.00	Stainless steel metric square bars of 30 mm or 40 mm, of type 304, cold-rolled, of length 4000 mm, of specification ASTM A276
12	7223.00.00	Stainless steel lashing wire or rebar tie wire
13	7223.00.00	Ultra-fine stainless steel wire, with a diameter of 0.15 mm or 0.28 mm
14	7225.11.00	Silicon grain-oriented steel, with a width of 600 mm or more
15	7225.99.00	Specialty steel products: S-7 VRM steel plates, D-2 VRM steel plates or A-2 VRM steel plates
16	7226.11.00	Silicon grain-oriented steel, with a width of less than 600 mm
17	7226.19.00	Silicon amorphous steel, with a width of less than 600 mm
18	7226.99.00	Specialty steel products of grade 4140, heat-treated, annealed
19	7228.30.00	Round specialty steel products, of the following grades: of grade 4340, heat-treated, of grade 8620, of grade 3312, hot-rolled, annealed, of grade 1045, hot-rolled, of grade 1018, hot-rolled or of grade EN30B
20	7228.40.00	Alloy steel bars and rods
21	7228.50.00	Other bars of other alloy steel, not further worked than cold-formed or cold-finished
21.1	7228.60.00	Bars, of alloy or non-alloy steel, with an outside diameter of at least 25 mm but not exceeding 203 mm, with a wall thickness of at least 5 mm but not exceeding 38 mm and a length not exceeding 12 m, with forged or machined ends
21.2	7304.11.00	Seamless stainless steel tubes, of circular cross-section, with an external diameter not exceeding 114.3 mm
22	7304.19.00	Unfinished seamless carbon or alloy steel line pipes in the form of mother tubes with an outside diameter of 184, 197, 210, 235, 260, 286, 328, 350, 368, 377, 394, 402, 419, 426, 450, 475, 480, 500, 521, 530, 560, 585 or 610 mm, a wall thickness of at least 9 mm but not exceeding 110 mm and a length of at least 7.72 m but not exceeding 15.24 m, not stenciled as meeting any line pipe product specification, but suitable for use in the production, and not solely the finishing, of seamless line pipe made to any one or more of the following specifications: API 5L, CSA Z245.1, ISO 3183, ASTM A333, ASTM A335, ASTM A106, ASTM A53 or their equivalent
23	7304.23.00	Drill pipes, other than of stainless steel, of specification API 5DP or API 7-1
24	7304.29.00.79	Tubes, pipes and hollow profiles, seamless, of iron — other than cast iron — or steel: coupling stock, with an outside diameter of at least 2.875 inches but not exceeding 37 inches
24.1	7304.31.00	Cold-drawn seamless mechanical tube of grade C1026, with an outside diameter of at least 2.625 inches but not exceeding 4.25 inches, with an inside diameter of at least 1.75 inches but not exceeding 4 inches, and a wall thickness of at least 0.313 inch but not exceeding 1 inch
24.2	7304.39.00	Steel coupling stock, of specification API 5CT L80, no coating
24.3	7304.39.00.70	Seamless tubes and pipes, of iron or non-alloy steel, for use in oil and gas applications, with an outside diameter of at least 25 mm but not exceeding 406 mm, with a wall thickness of at least 3 mm but not exceeding 50 mm, with lengths not exceeding 12 m
24.4	7304.49.00.90	Seamless tubes and pipes, of stainless steel, annealed and pickled or bright finish, for oil and gas service, with an outside diameter of at least 25 mm but not exceeding 273 mm, with a wall thickness of at least 2 mm but not exceeding 30 mm, with lengths not exceeding 12 m
24.5	7304.51.00	(a) Seamless tubes and pipes, of alloy steel, cold-drawn or cold-rolled, for use in drill pipe and completions equipment, with lengths up to 12 m, with an outside diameter of at least 25 mm but not exceeding 355 mm, with a wall thickness of at least 3 mm but not exceeding 40 mm; (b) Seamless or ERW carbon steel tubes, of grade 1010 or 1020, with an outside diameter of at least 4.95 inches but not exceeding 14.00 inches
24.6	7304.59.00	Seamless tubing of alloy-steel, hot-finished, of an outside diameter of 5.50 inches and an inside diameter of 3.865 inches
25	7304.59.00.60	(a) Alloy mechanical tubes of grade 4140 or 4130 Mod, of specification ASTM A519, with an external diameter of at least 3.5 inches but not exceeding 10 inches, of a wall thickness of at least 0.3 inch but not exceeding 1.5 inches, and black lacquer protective coating; (b) Seamless tubes, of alloy steel, with lengths not exceeding 12 m, of a kind used for oil or gas pipelines with an outside diameter of at least 25 mm but not exceeding 355 mm
25.1	7305.31.00.19	Longitudinally welded pipes of grade 3 ASTM A252
25.2	7305.39.00.20	Spiral welded steel pipes, of circular cross-sections
25.3	7306.29.00	Welded tubes of iron or non-alloy steel, with an outside diameter of at least 19.1 mm but not exceeding 88.9 mm, and a wall thickness of at least 2.0 mm but not exceeding 7.6 mm
25.4	7306.30.00.51	Carbon steel DOM (drawn over mandrel) structural tubing, grade 1026, with an outside diameter exceeding 60.325 mm but not exceeding 168.28 mm, of specification ASTM A513, A106 or A519
25.5	7306.30.00.59	Carbon steel DOM (drawn over mandrel) tubing, other than structural, grade 1026, with an outside diameter exceeding 60.325 mm but not exceeding 168.28 mm, of specification ASTM A513, A106 or A519
25.6	7306.30.00.61	Carbon steel DOM (drawn over mandrel) structural tubing, grade 1026, with an outside diameter exceeding 168.28 mm but not exceeding 273.05 mm, of specification ASTM A513, A106 or A519
25.7	7306.40.00.00	Stainless steel of grade 304L flared tubes
26	7306.40.00.10	Stainless steel tubes, circular, of type 304L, with an external diameter not exceeding 25.3 mm
27	7306.40.00.20	Stainless steel tubes, circular, of type 304L, with an external diameter exceeding 25.3 mm but not exceeding 114.9 mm
27.1	7306.50.00	Welded tubes of circular cross-section, of alloy steel other than stainless steel, with an outside diameter of at least 19.1 mm but not exceeding 88.9 mm, with a wall thickness of at least 2.0 mm but not exceeding 7.6 mm
28	7306.61.00.39	Steel tubes — other than galvanized — rectangular, of type 304L, with an external periphery not exceeding 812.8 mm
29	7604.21.00	Aluminum alloy hollow profiles with a powder coating finish on the interior and exterior surfaces
30	7604.29.00	Aluminum alloy bars, rods and profiles: Die #C300X110, Die #C410X110 or Die #1693
30.1	7604.29.00.11	Bars of aluminum alloys, of round cross-section, with a cross-sectional dimension exceeding 12.7 mm
31	7605.19.00	Non-alloyed aluminum wire, with cross-sectional dimension not exceeding 7 mm, of grade AL-1350, compliant with the chemical requirements referred to in Table 2 of specification ASTM B233-97, of any of the following dimensions: – 0.175 inches in length by 0.075 inches in width – 0.175 inches in length by 0.095 inches in width – 0.200 inches in length by 0.105 inches in width – 0.250 inches in length by 0.105 inches in width – 0.256 inches in length by 0.128 inches in width – 0.312 inches in length by 0.130 inches in width – 0.250 inches in length by 0.150 inches in width – 0.312 inches in length by 0.165 inches in width
32	7606.11.00	Non-alloyed aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular, compliant with specification ASTM B209 or equivalent industry specifications, flat 2 mm per metre in all directions, with diagonals that do not measure a difference of more than 4 mm, no visible ripples on any sheet and no scratches, gouges or residual oils
33	7606.11.00	Non-alloyed aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular, used as cathode sheets in zinc electrowinning processes
34	7606.11.00	Non-alloyed aluminum plates, sheets and strip, rectangular, of grade 1050 Aluminum “O” Coil or grade 1350 Aluminum “O” Coil, compliant with the chemical requirements of specification ASTM B233-97, with a thickness of at least 0.020 inches but not exceeding 0.060 inches, a width of at least 2 inches but not exceeding 33.5 inches, and a mill finish
35	7606.12.00	Aluminum alloy plates, sheets and strip, of a thickness exceeding 0.2 mm, rectangular
36	7606.12.00.11	(a) Aluminum checker plate sheets of alloy 3003, with a base thickness of 4 mm, width of 4 feet and length of 10 feet; (b) Pre-painted aluminum coils, 3003-H24 with 8 or 12 µm polyester coating in black, brown or white, with a thickness of 0.5 mm and width of 610 mm; (c) Aluminum coils of alloy 5005, H14 or H34, anodized quality, not clad, with a thickness exceeding 0.2 mm but less than 7 mm; (d) Pre-painted aluminum coils, 3105-H26, with a thickness of at least 0.7 mm but not exceeding 0.8 mm, and a width of at least 1,240 mm but not exceeding 1,250 mm
37	[Repealed, SOR/2025-210, s. 12]
37.1	[Repealed, SOR/2025-210, s. 12]
38	7606.12.00.12	Aluminum alloy plates, sheets and strip, with a thickness of 7 mm or more, rectangular, not clad, compliant with specification ASTM B209 or equivalent industry specifications, flat 2 mm per metre in all directions, with diagonals that do not measure a difference of more than 4 mm, no visible ripples on any sheet and no scratches, gouges or residual oils
38.1	7606.12.00.12	Aluminum coils of alloy 5005, H14 or H34, anodized quality, not clad, with a thickness of 7 mm or more
38.2	7606.91.00.90	Aluminum plates, sheets and strip, of non-alloyed aluminum, with a thickness of at least 3.5 mm but not exceeding 5.5 mm, circular, with a diameter of at least 100 mm but not exceeding 245 mm
38.3	7607.11.00	Aluminum foil, rolled but not further worked, not backed, in coils or reels, with a thickness of at least 0.004 inch but not exceeding 0.010 inch, and a width of at least 0.98 mm but not exceeding 22 inches, whether or not surface-treated
38.4	7607.11.00.20	Aluminum foil, in precut sheets or rolls, alloy 1145, soft temper (O), with a thickness of at least 0.013 mm but not exceeding 0.017 mm, of a width of at least 5 inches and of a length of at least 7 inches but not exceeding 14 inches for sheets, or in rolls of at least 320 feet but not exceeding 1700 feet
39	7607.19.00.00	(a) Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, other than rolled but not further worked, of alloys 3003, 3004, 3104, 8011 or 8111; (b) Aluminum foil rolls, alloy 1145, soft temper (O), with a thickness of at least 0.013 mm but not exceeding 0.017 mm, 5 inches wide, in rolls of at least 320 feet but not exceeding 1700 feet
39.1	7608.20.00	Rigid aluminum conduit, threaded, in 10-foot lengths, in trade sizes of at least 0.5 inch but not exceeding 6 inches, with coupling on one end
40	7609.00.00	Aluminum tube or pipe fittings, of the following specifications: Wall thickness: approximately 0.106 inches at the thinnest point to approximately 0.783 inches at the thickest point Outer diameter: at least 1 inch but not exceeding 10 inches Length: at least 2 inches but not exceeding 12 inches Cylindrical shape, of the following grades and specifications: Grade: AA383, Specification: B85 Grade: AA713, Specification: B26 Grade: AA356 / AA356-T6, Specification: B108 Grade: 413.2, Specification: B179

Note If the description in column 2 covers only a subset of goods classified under the tariff item referred to in column 1, remission is granted only for the goods described in column 2.

SCHEDULE 2(Subsection 1(1) and paragraph 1(2)(b))

Item	Business Number	Tariff Item	Description of Goods	Period	Conditions
	Column 1	Column 2	Column 3	Column 4	Column 5
1	102645082	7607.11.00	Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked	From October 22, 2024 to December 31, 2025
1.1	103569372	7229.90.00	Chrome silicon wire, round, with a diameter of at least 1.5 mm but not exceeding 8.51 mm	From October 22, 2024 to December 31, 2025
1.2	105489272	7212.40.00	Steel strapping, with open or closed steel sleeves	From October 22, 2024 to August 31, 2025
1.2	105489272	7217.90.00	Steel black annealed wire coils, rebar tie wire and galvanized black annealed wire coils	From October 22, 2024 to December 31, 2025
1.3	105497242	7223.00.00.90	Stainless steel wires of alloy 304L, cold drawn and annealed	From October 22, 2024 to July 1, 2025
2	119446847	7228.30.00.72	Hot-rolled steel bars, of special bar quality	From October 22, 2024 to December 31, 2025
3	122960222	7606.91.00.10	Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, circular, with circumference from at least 6 inches but not exceeding 20 inches	From October 22, 2024 to December 31, 2025
4	137864229	7305.31.00	Coated permanent steel piles, longitudinally welded, with a pipe outer diameter of 1.219 m, a thickness of 25.4 mm and lengths not exceeding 95 m	From October 22, 2024 to December 31, 2025
4	137864229	7305.39.00	Temporary steel piles, spiral welded, with a pipe outer diameter of 0.914 m, and a length of at least 59 m but not exceeding 75 m	From October 22, 2024 to December 31, 2025
4.1	140515958	7604.29.00.30	Extruded 5-star (blade) turbulator, with a diameter of 8.30 mm of alloy 6063, of temper T5, of straight lengths of up to 4877 mm	From October 22, 2024 to December 31, 2025
		7606.12.00.20	Extruded rectangular micro channel tubes, 76.2 mm x 9.04 mm, with a wall thickness of 0.51 mm, of alloy 3003, of temper F, of straight lengths of up to 4877 mm	From October 22, 2024 to December 31, 2025
		7608.20.00	Extruded round thin-walled aluminum tubes, of alloy 3003, of temper O, with an outside diameter of 9.09 mm, with a wall thickness of 0.51 mm, spooled on level wound coils	From October 22, 2024 to December 31, 2025
5	709514509	7304.39.00	Steel coupling stock or mechanical tubes, no coating, with diameter of at least 4 inches but not exceeding 20 inches, with a wall thickness of at least 0.5 inch but not exceeding 2 inches, imported in lots of random length tubes not exceeding 30 feet, and that are: (a) of specification ASTM A519/A513, of grade 1026, 4140, or 4130; (b) of specification API 5CT, of grade K55, L80, P110, C110, or Q125	From October 22, 2024 to December 31, 2025
5.1	723429320	7305.39.00.30	Spiral-welded tubes of stainless steel, with an outside diameter of at least 1 m but not exceeding 3 m, a wall thickness of at least 20 mm but not exceeding 30 mm, and a length not exceeding 50 m	From October 22, 2024 to December 31, 2025
5.1	723429320	7306.40.00.30	Longitudinally welded tubes of non-alloy steel, with an outside diameter of at least 1 m but not exceeding 3 m, a wall thickness of at least 20 mm but not exceeding 30 mm, and a length not exceeding 50 m	From October 22, 2024 to December 31, 2025
6	729240341	7606.12.00	Flat-rolled aerospace-grade aluminum, of alloys 7475, 7075 or 2024	From October 22, 2024 to December 31, 2025	Imported for sale to company with business number 871361366
7	729240341	7606.12.00.12	Aluminum alloy plates, sheets and strip, rectangular, not clad, with a thickness of 7 mm or more	From October 22, 2024 to March 31, 2025	Imported for sale to company with business number 861072163
8	736401290	7223.00.00.90	Stainless steel profile wire with a solid cross-sectional area greater than 0.787 mm²	From October 22, 2024 to December 31, 2025
8	736401290	7306.40.00.10	Stainless steel capillary line	From October 22, 2024 to December 31, 2025
9	737151720	7604.21.00.10	Aluminum hollow profiles, unworked	From October 22, 2024 to December 31, 2025
9	737151720	7606.12.00.20	Aluminum alloy plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular, clad	From October 22, 2024 to December 31, 2025
9.01	741519524	7222.11.00.10	Stainless steel rebar	From October 22, 2024 to December 31, 2025
9.1	747545747	7217.10.00	Non-alloy steel wire, not plated or coated, whether polished or not	From October 22, 2024 to December 31, 2025
9.1	747545747	7217.30.00	Copper plated steel wires, plated or coated with other base metal	From October 22, 2024 to June 1, 2026
9.2	756550901	7604.29.00.30	Aluminum profiles, extruded, with a cross-sectional dimension exceeding 254 mm, supplied in straight lengths	From October 22, 2024 to December 31, 2025
10	758833297	7210.70.00.90	Pre-painted steel coils PPGI or PPGL, with a thickness of at least 0.37 mm but not exceeding 0.45 mm, AZ100 g/M² with polyester and epoxy coating in black or brown, and a width of at least 590 mm but not exceeding 1220 mm	From October 22, 2024 to December 31, 2025
11	761094119	7607.11.00	Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked	From October 22, 2024 to December 31, 2025
12	769792870	7607.11.00	Aluminum foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding a length of 0.2 mm, rolled but not further worked, of alloy 3003 or 3004, with food-safe lubrication	From October 22, 2024 to December 31, 2025
13	778340406	7606.12.00.20	Aluminum sheets, with a thickness exceeding 0.2 mm, rectangular, clad, of alloy 3003 or 4045	From October 22, 2024 to December 31, 2025
		7606.92.00.00	Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, other than rectangular, of alloy 4043, 4045, 3003, 3005 or 7072
		7607.11.00.20	Aluminum foil, not backed, rolled but not further worked, with a thickness of 0.005 mm or more but less than 0.127 mm, of alloy 3003
14	782889604	7210.12.00	Electrolytic tinplate of iron or non-alloy steel, batch annealed materials or box annealed materials, with a thickness of less than 0.50 mm and width of more than over 600 mm	From October 22, 2024 to December 31, 2025	Imported for sale to company with business number 104708409
14.01	795006428	7304.39.00.90	Seamless steel tubes of non-alloy steel, of a circular cross-section, with an outside diameter of at least 1 m but not exceeding 3 m, a wall thickness of at least 25 mm but not exceeding 30 mm, meeting specifications equivalent to CSA G40.20-13/G40.21-13 or ASTM A572	From October 22, 2024 to December 31, 2025
14.02	797799673	7306.30.00	Steel electrical metallic tubing (EMT), galvanized, non-threaded, in 10-foot lengths, trade size of at least 1.5 inches but not exceeding 4 inches	From October 22, 2024 to December 31, 2025
14.1	798045084	7604.21.00.90	Aluminum bars, rods and profiles, hollow profiles, other	From October 22, 2024 to December 31, 2025
15	808739577	7607.11.00	Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked	From October 22, 2024 to December 31, 2025
15.1	813792462	7607.11.00.20	Aluminum foil, not backed, rolled but not further worked, with a thickness of at least 0.005 mm but not exceeding 0.127 mm, of alloy 8079	From October 22, 2024 to December 31, 2025
16	842474249	7217.10.00.43	Spring wire, with a diameter of 1.0 mm or more but less than 1.5 mm	From October 22, 2024 to December 31, 2025
16	842474249	7217.10.00.44	Spring wire, with a diameter of 1.5 mm or more but less than 3 mm	From October 22, 2024 to December 31, 2025
17	858299928	7606.91.00	Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, other than rectangular, non-alloyed, of the 1000, 5000 or 8000 series	From October 22, 2024 to December 31, 2025
		7606.92.00	Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, other than rectangular, alloyed, of the 1000, 5000 or 8000 series
		7607.11.00	Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked, of the 1000, 5000 or 8000 series
		7607.19.00	Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, other than rolled but not further worked, of the 1000, 5000 or 8000 series
18	861072163	7606.12.00.12	Aluminum alloy plates, sheets and strip, rectangular, not clad, with a thickness of 7 mm or more	From April 1, 2025 to December 31, 2025
19	861206423	7306.50.00.00	Steel tubes, circular, cold-rolled, of specification ASTM A500 gr A	From October 22, 2024 to December 31, 2025
		7306.61.00.39	Steel tubes, rectangular, cold-rolled, of specification ASTM A500 gr A
		7306.69.00.39	Steel tubes, oval, of specification ASTM A500 gr A
20	863579827	7607.11.00	Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked	From October 22, 2024 to December 31, 2025
21	872321203	7606.12.00	Aluminum alloy plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular	From October 22, 2024 to December 31, 2025
22	872889514	7228.40.00	Steel bars with an outer diameters of at least 7.1 inches but not exceeding 26.6 inches, of grade 4130, of specification API 6A	From October 22, 2024 to December 31, 2025
23	876686320	7607.11.00	Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked	From October 22, 2024 to December 31, 2025
24	882092562	7219.90.00	#301 Full Hard Stainless Steel coil, with thickness of 0.02 inches (0.5 mm), width of 1 inch (25 mm), grounded edges, purchased in large coils	From October 22, 2024 to October 21, 2025
24.01	891389389	7225.40.00	Flat-rolled products of other alloy steel, hot-rolled, of a width of at least 600 mm, including plates and other flat-rolled forms	From October 22, 2024 to December 31, 2025
24.1	892183476	8703.40.90	Non-plug-in hybrid passenger vehicles, with both a spark-ignition internal combustion piston engine and an electric motor for propulsion, with a cylinder capacity of 1000 cm³ or more	For goods imported on or after October 1, 2024	Remission limited to a maximum of 554 vehicles
24.2	895930287	7607.11.00.20	Rolls of aluminum foil with a thickness ranging from 7 µm to 70 µm and a width of at least 40 inches but not exceeding 60 inches	From October 22, 2024 to December 31, 2025
25	896964400	7219.90.00	Stainless steel sheets, of the following specifications: Grade: 430 BA Specification: ASTM A240 Thickness: of at least 0.048 inches but not exceeding 0.073 inches Width: 26.25 inches Length: at least 60 inches but not exceeding 155 inches No coating but protective SPV or PVC on one side	From October 22, 2024 to July 31, 2026
25	896964400	7606.12.00	Aluminum alloy sheets, rectangular, of the following specifications: Grade: 3003 H14 Specification: ASTM B209 Thickness: 0.085 inches Width: of at least 28 inches but not exceeding 34.5 inches Length: at least 60 inches but not exceeding 190 inches	From October 22, 2024 to July 31, 2026
26	899771042	7606.12.00	Pre-painted aluminum coil, of alloy 3003 or 3105, with a thickness of 0.012 inches, 0.017 inches, 0.0234 inches, 0.027 inches or 0.32 inches	From October 22, 2024 to December 31, 2025	Imported for sale to company with business number 100980127

Note If the description in column 3 covers only a subset of goods classified under the tariff item referred to in column 2, remission is granted only for the goods described in column 3.

SOR/2025-114, s. 8
SOR/2025-114, s. 9
SOR/2025-114, s. 10
SOR/2025-114, s. 11
SOR/2025-114, s. 12
SOR/2025-114, s. 13
SOR/2025-114, s. 14
SOR/2025-147, s. 3
SOR/2025-147, s. 4
SOR/2025-147, s. 5
SOR/2025-147, s. 6
SOR/2025-147, s. 7
SOR/2025-210, s. 16
SOR/2025-210, s. 17
SOR/2025-210, s. 18
SOR/2025-210, s. 19
SOR/2025-210, s. 20
SOR/2025-210, s. 21
SOR/2025-210, s. 22

Page Details

Date modified:: 2026-04-01

Language selection

Search

China Surtax Remission Order (2024)

Remission

Coming into Force

SCHEDULE 1(Subsection 1(1) and paragraph 1(2)(a))

SCHEDULE 2(Subsection 1(1) and paragraph 1(2)(b))

Page Details