Determination of Country of Origin for the Purpose of Marking Goods (CUSMA Countries) Regulations

A change to heading No. 03.04 from any other chapter; or

A change to a fillet of heading No. 03.04 from any other heading.

A change to subheading No. 0403.90 from any other chapter; or

A change to sour cream or kephir of subheading No. 0403.90 from any other good of Chapter 4, whether or not there is also a change from any other chapter.

A change to heading No. 07.12 from any other chapter; or

If put up for retail sale, a change to powdered vegetables of heading No. 07.12 from any other good of Chapter 7, whether or not there is also a change from any other chapter.

A change to subheading No. 0910.91 from any other chapter; or

A change to subheading No. 0910.91 from any other subheading, provided that a single foreign spice ingredient of Chapter 9 constitutes no more than 60 per cent by weight of the good.

A change to subheading No. 1517.90 from any other chapter; or

A change to subheading No. 1517.90 from any other heading, provided that a single foreign oil ingredient constitutes no more than 60 per cent by volume of the good.

A change to subheading No. 1806.10 from any other heading, except from Chapter 17 or heading No. 18.05; or

A change to subheading No. 1806.10 from Chapter 17, whether or not there is also a change from any other heading, except from heading No. 18.05, provided that sugars constitute no more than 65 per cent by dry weight of the good.

A change to subheading No. 1806.20 from any other heading, except from Chapter 17; or

A change to subheading No. 1806.20 from Chapter 17, whether or not there is also a change from any other heading, provided that sugars constitute no more than 65 per cent by dry weight of the good.

• Note: Notwithstanding the tariff shift rules of Chapter 20, fruit, nut and vegetable preparations of Chapter 20 that have been prepared or preserved merely by freezing, by packing (including canning) in water, brine or natural juices, or by roasting, either dry or in oil (including processing incidental to freezing, packing, or roasting), shall be treated as a good of the country in which the fresh good was produced.

A change to subheading No. 2103.30 from any other subheading; or

A change to prepared mustard of subheading No. 2103.30 from mustard flour or meal.

A change to a good of subheading No. 2202.10, except a sweetened or flavoured water, from any other heading; or

A change to a sweetened or flavoured water of subheading No. 2202.10 from any other chapter.

A change to subheading No. 2202.90 from any other subheading, except from Chapter 4 or heading No. 19.01, 20.09 or 21.06; or

A change to subheading No. 2202.90 from Chapter 4 or heading No. 19.01, whether or not there is also a change from any other subheading, provided that milk solids constitute no more than 50 per cent by weight of the good; or

A change to subheading No. 2202.90 from heading No. 20.09 or subheading No. 2106.90, whether or not there is also a change from any other subheading, provided that a single foreign juice ingredient, or juice ingredients from a single foreign country, constitute in single strength form no more than 60 per cent by volume of the good.

A change to heading No. 22.05 from any other heading, except from heading No. 22.04; or

A change to vermouth of heading No. 22.05 from heading No. 22.04, whether or not there is also a change from any other heading.

A change to subheading No. 2208.90 from any other subheading, except from subheading No. 2208.10; or

A change to cordials, liqueurs, kirschwasser or ratafia of subheading No. 2208.90 from within subheading No. 2208.90, whether or not there is also a change from any other subheading.

• Note: For purposes of this chapter, a chemical reaction means a process in which chemical bonds in molecules are broken and new chemical bonds are formed between the fragmented molecules or added elements so that one or more of the original bonds no longer link the same chemical elements or functional groups.

A change to heading No. 27.07 from any other heading; or

A change to subheading Nos. 2707.10 through 2707.99 from any other subheading, including another subheading within that group, provided that the good of the other subheading undergoes a chemical reaction.

A change to heading No. 27.10 from any other heading; or

A change to a good of heading No. 27.10 from any other good of that heading, whether or not there is also a change from any other heading, provided that the good of the other heading undergoes a chemical reaction.

A change to subheading No. 3001.10 from any other subheading, except from subheading Nos. 0206.10 through 0208.90 or 0305.20, heading No. 05.04 or 05.10 or subheading No. 0511.99; or

A change to a powder of subheading No. 3001.10 from any other subheading.

A change to subheading No. 3005.90 from any other subheading, except from Chapters 50 through 63; or

A change to subheading No. 3005.90 from Chapters 50 through 63, whether or not there is also a change from any other subheading, provided that the production includes impregnating or coating with a pharmaceutical material.

A change to heading No. 44.12 from any other heading; or

A change to a surface covered plywood of heading No. 44.12 from any other plywood of that heading, whether or not there is also a change from any other heading, except from plywood of heading No. 44.12 that is non-surface covered or surface covered with a clear or transparent material that does not obscure the grain, texture or marking of the face ply.

A change to twine, cordage, rope or cable of heading No. 56.07 that is not plaited or braided, or covered or sheathed with rubber or plastics, from any other heading, except from heading Nos. 50.04 through 50.05, 51.06 through 51.08, 51.10, 52.04 through 52.06, 53.06 through 53.08, 54.01 through 54.05, or 55.08 through 55.10; or

A change to any other good of heading No. 56.07 from any other heading.

• Note: For purposes of this Chapter, the expression similar good means similar article as described in the applicable Chapter, heading or subheading notes of the Harmonized Commodity Description and Coding System (“HS”).

A change to a label or similar good of heading No. 58.07 from any other heading, except from heading Nos. 50.07, 51.11 through 51.13, 52.08 through 52.12, 53.09 through 53.11, 54.07 through 54.08, 55.12 through 55.16 or subheading Nos. 5806.10 through 5806.39; or

A change to a badge or similar good of heading No. 58.07 from any other heading, except from subheading No. 6307.90.

A change to an ornamental trimming of subheading No. 5808.90 from any other heading; or

A change to a tassel, pompon or similar good of subheading No. 5808.90, from any other heading, except from heading Nos. 50.04 through 50.05, 51.06 through 51.09, 52.04 through 52.06, 53.06 through 53.08, 54.01 through 54.05, 55.08 through 55.10 or 56.04 through 56.06.

A change to heading No. 58.10 from any other chapter, except from heading Nos. 50.07, 51.11 through 51.13, 52.08 through 52.12, 53.09 through 53.11, 54.07 through 54.08, 55.12 through 55.16, 56.02 through 56.03, 58.01, 58.04, 58.06 or 60.01 through 60.02; or

A change to heading No. 58.10 from any other heading, provided that the production constitutes more than minor embroidery along the selvage of the good.

A change to heading No. 59.03 from any other heading, except from heading Nos. 50.07, 51.11 through 51.13, 52.08 through 52.12, 53.09 through 53.11, 54.07 through 54.08, 55.12 through 55.16 or 58.03, subheading Nos. 5806.10 through 5806.39 or heading No. 58.08 or 60.02; or

A change to a woven fabric of heading No. 59.03 from any other heading, provided that the impregnation, coating, covering or lamination constitutes 15 per cent or more by weight of the good; or

A change to a knitted fabric of heading No. 59.03 from any other heading, provided that the impregnation, coating, covering or lamination constitutes 20 per cent or more by weight of the good.

A change to heading No. 59.07 from any other heading, except from heading Nos. 50.07, 51.11 through 51.13, 52.08 through 52.12, 53.09 through 53.11, 54.07 through 54.08, 55.12 through 55.16 or 58.03, subheading Nos. 5806.10 through 5806.39 or heading No. 58.08 or 60.02; or

A change to a woven fabric of heading No. 59.07 from any other heading, provided that the impregnation, coating, covering or lamination constitutes 15 per cent or more by weight of the good; or

A change to a knitted fabric of heading No. 59.07 from any other heading, provided that the impregration, coating, covering or lamination constitutes 20 per cent or more by weight of the good.

A change to heading No. 60.01 from any other heading; or

A change to a fabric of heading No. 60.01 impregnated, coated, covered or laminated with rubber, plastics or other materials, from any other fabric of heading No. 60.01, provided that the impregnation, coating, covering or lamination constitutes 20 per cent or more by weight of the good.

• Note 1: The country of origin of a good of heading No. 63.09 shall be the country in which the good is last collected and packaged for shipment.

• Note 2: The country of origin of a worn-out article of heading No. 63.10 shall be the country in which the good is last collected and packaged for shipment.

A change to a quilted good of heading No. 63.02 from any other heading, except from subheading No. 6307.90, provided that both the cutting of the top and bottom fabrics and the assembly of the quilted good are performed entirely in one country; or

A change to a non-quilted good of heading No. 63.02 from any other heading, provided that the production includes cutting and hemming all sides and a significant sewing or other assembly operation with respect to the good.

A change to a quilted good of heading No. 63.03 from any other heading, except from subheading No. 6307.90, provided that both the cutting of the top and bottom fabrics and the assembly of the quilted good are performed entirely in one country; or

A change to a curtain, drape, curtain valance or bed valance of heading No. 63.03 from any other heading, provided that the production includes cutting and hemming all sides and a significant sewing or other assembly operation with respect to the good; or

A change to any other good of heading No. 63.03 from any other heading, except from heading Nos. 50.07, 51.11 through 51.13, 52.08 through 52.12, 53.09 through 53.11, 54.07 through 54.08, 55.12 through 55.16, 56.02 through 56.03, 58.01 through 58.04, 58.06, 58.09 through 58.10, 59.03, 59.06 through 59.07 or 60.01 through 60.02.

A change to a quilted good of heading No. 63.04 from any other heading, except from subheading No. 6307.90, provided that both the cutting of the top and bottom fabrics and the assembly of the quilted good are performed entirely in one country; or

A change to a pillow cover or pillow sham of heading No. 63.04 from any other heading; or

A change to any other good of heading No. 63.04 from any other heading, except from heading Nos. 50.07, 51.11 through 51.13, 52.08 through 52.12, 53.09 through 53.11, 54.07 through 54.08, 55.12 through 55.16, 56.02 through 56.03, 58.01 through 58.04, 58.06, 58.09 through 58.10, 59.03, 59.06 through 59.07 or 60.01 through 60.02.

A change to a tarpaulin or sunblind of subheading Nos. 6306.11 through 6306.19 from any other heading, except from heading Nos. 50.07, 51.11 through 51.13, 52.08 through 52.12, 53.09 through 53.11, 54.07 through 54.08, 55.12 through 55.16, 56.03, 58.01 through 58.02, 58.09 through 58.11, 59.03, 59.06 through 59.07 or 60.01 through 60.02; or

A change to an awning of subheading Nos. 6306.11 through 6306.19 from any other chapter.

• Note: For purposes of this Chapter, the term formed uppers, means uppers, with closed bottoms, that are shaped by lasting, moulding or otherwise, but not by simply closing at the bottom.

A change to heading Nos. 65.03 through 65.06 from any heading outside that group, except from heading Nos. 65.01 through 65.02; or

A change to heading Nos. 65.03 through 65.06 from heading No. 65.01, provided that the production includes blocking of the good; or

A change to heading Nos. 65.03 through 65.06 from heading No. 65.02, provided that the production includes at least two of the following:

at least three processing operations altogether.

A change to subheading No. 6603.20 from any other heading; or

A change to subheading No. 6603.20 from subheading No. 6603.90, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other heading.

A change to heading No. 67.01 from any other heading; or

A change to a feather or down good of heading No. 67.01 from feather or down of that heading, whether or not there is also a change from any other heading.

A change to heading No. 71.16 from any other heading, except from heading No. 71.01; or

A change to heading No. 71.16 from heading No. 71.01, whether or not there is also a change from any other heading, provided that the production constitutes more than temporarily or permanently stringing the pearls.

A change to heading No. 72.17 from any other heading, except from heading Nos. 72.13 through 72.15; or

A change to heading No. 72.17 from heading Nos. 72.13 through 72.15, whether or not there is also a change from any other heading, provided that the cross-sectional area of the rod is reduced by at least 50 per cent.

A change to heading No. 72.23 from any other heading, except from heading Nos. 72.21 through 72.22; or

A change to heading No. 72.23 from heading Nos. 72.21 through 72.22, whether or not there is also a change from any other heading, provided that the cross-sectional area of the rod is reduced by at least 50 per cent.

A change to heading No. 73.08 from any other heading, except from heading No. 72.16; or

A change to heading No. 73.08 from angles, shapes or sections of heading No. 72.16, whether or not there is also a change from any other heading, provided that the production includes more than one of the following:

• (a) drilling, punching, notching, cutting, cambering or sweeping, whether performed individually or in combination;

• (b) adding attachments or weldments for composite construction;

• (c) adding attachments for handling purposes;

• (d) adding weldments, connectors or attachments to H-sections or I-sections, provided that the maximum dimension of the weldments, connectors or attachments is not greater than the dimension between the inner surfaces of the flanges of the H-sections or I-sections;

• (e) painting, galvanizing or otherwise coating; or

• (f) adding a simple base plate without stiffening elements, individually or in combination with drilling, punching, notching or cutting to create an article suitable as a column.

A change to subheading Nos. 7315.11 through 7315.12 from any other heading; or

A change to subheading Nos. 7315.11 through 7315.12 from subheading Nos. 7315.19 or 7315.90, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other heading.

A change to subheading Nos. 7315.20 through 7315.89 from any other heading; or

A change to subheading Nos. 7315.20 through 7315.89 from subheading No. 7315.90, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other heading.

A change to subheading Nos. 7321.11 through 7321.83 from any other heading; or

A change to subheading Nos. 7321.11 through 7321.83 from subheading No. 7321.90, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other heading.

A change to heading No. 74.08 from any other heading, except from heading No. 74.07; or

A change to heading No. 74.08 from heading No. 74.07, whether or not there is also a change from any other heading, provided that the cross-sectional area of the rod is reduced by at least 50 per cent.

A change to heading No. 75.06 from any other heading; or

A change to foil of heading No. 75.06 of a thickness of 0.15 mm or less from any other good of heading No. 75.06, whether or not there is also a change from any other heading, provided that the thickness of the good is reduced by at least 50 per cent.

A change to heading No. 76.05 from any other heading, except from heading No. 76.04; or

A change to heading No. 76.05 from heading No. 76.04, whether or not there is also a change from any other heading, provided that the cross-sectional area of the rod is reduced by at least 50 per cent.

A change to heading Nos. 78.01 through 78.03 from any other heading, including another heading within that group; or

A change to wire of heading No. 78.03 from rod of that heading, whether or not there is also a change from any other heading, provided that the cross-sectional area of the rod is reduced by at least 50 per cent.

A change to subheading Nos. 7804.11 through 7804.20 from any other subheading, including another subheading within that group; or

A change to any of the following goods of heading No. 78.04 from any other goods of that heading, whether or not there is also a change from any other subheading: powder, except from flakes; flake, except from powders; plate, except from sheets or strips; sheet, except from plates or strips; strip, except from sheets or plates.

A change to heading Nos. 79.01 through 79.06 from any other heading, including another heading within that group; or

A change to any of the following goods of heading Nos. 79.01 through 79.06 from any other goods of those headings, whether or not there is also a change from any other heading: unwrought matte; powder, except from flakes; flake, except from powders; bar, except from rods or profiles; rod, except from bars or profiles; profile, except from rods or bars; plate, except from sheets or strips; sheet, except from plates or strips; strip, except from sheets or plates; foil, except from sheets or strips; tube, except from pipes; pipe, except from tubes; tube or pipe fittings, except from tubes or pipes; or

A change to wire of heading Nos. 79.01 through 79.06 from rod of those headings, whether or not there is also a change from any other heading, provided that the cross-sectional area of the rod is reduced by at least 50 per cent.

A change to heading Nos. 80.02 through 80.04 from any other heading, including another heading within that group; or

A change to any of the following goods of heading Nos. 80.02 through 80.04 from any other goods of those headings, whether or not there is also a change from any other heading: bar, except from rods or profiles; rod, except from bars or profiles; profile, except from rods or bars; plate, except from sheets or strips; sheet, except from plates or strips; strip, except from sheets or plates; or

A change to wire of heading Nos. 80.02 through 80.04 from rod of those headings, whether or not there is also a change from any other heading, provided that the cross-sectional area of the rod is reduced by at least 50 per cent.

A change to subheading Nos. 8101.10 through 8101.92 from any other subheading, including another subheading within that group; or

A change to any of the following goods of subheading Nos. 8101.10 through 8101.92 from any other goods of those subheadings, whether or not there is also a change from any other subheading: unwrought matte; bar, except from rods or profiles; rod, except from bars or profiles; profile, except from rods or bars; plate, except from sheets or strip; sheet, except from plates or strip; strip, except from sheets or plates; foil, except from sheets and strips.

A change to subheading No. 8101.93 from any other subheading, except from subheading No. 8101.92; or

A change to subheading No. 8101.93 from subheading No. 8101.92, whether or not there is also a change from any other subheading, provided that the cross-sectional area of the rod is reduced by at least 50 per cent.

A change to subheading No. 8101.99 from any other subheading; or

A change to any of the following goods of subheading No. 8101.99 from any other goods of that subheading, whether or not there is also a change from any other subheading: tube, except from pipes; pipe, except from tubes; tube or pipe fittings, except from tubes or pipes; cable, stranded wire or plaited band.

A change to subheading Nos. 8102.10 through 8102.92 from any other subheading, including another subheading within that group; or

A change to any of the following goods of subheading Nos. 8102.10 through 8102.92 from any other goods of those subheadings, whether or not there is also a change from any other subheading: unwrought matte; bar, except from rods or profiles; rod, except from bars or profiles; profiles, except from rods or bars; plate, except from sheets or strips; sheet, except from plates or strips; strip, except from sheets or plates; foil, except from sheets or strips.

A change to subheading No. 8102.93 from any other subheading, except from subheading No. 8102.92; or

A change to subheading No. 8102.93 from subheading No. 8102.92, whether or not there is also a change from any other subheading, provided that the cross-sectional area of the rod is reduced by at least 50 per cent.

A change to subheading Nos. 8301.10 through 8301.50 from any other subheading, including another subheading within that group, except from subheading No. 8301.60; or

A change to subheading Nos. 8301.10 through 8301.50 from subheading No. 8301.60, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other subheading.

• Note: Where a tube and an incomplete television receiver, neither of which is of Canadian origin, have been assembled together into a complete or finished television receiver, the tube shall be considered to be the single material that imparts the essential character of the complete television receiver.

A change to subheading No. 8508.90 from any other heading, except from heading No. 85.01; or

A change to subheading No. 8508.90 from heading No. 85.01, whether or not there is also a change from any other heading, provided that the production constitutes more than simple assembly.

A change to subheading No. 8509.90 from any other heading, except from heading No. 85.01; or

A change to subheading No. 8509.90 from heading No. 85.01, whether or not there is also a change from any other heading, provided that the production constitutes more than simple assembly.

A change to subheading No. 8510.90 from any other heading, except from heading No. 85.01; or

A change to subheading No. 8510.90 from heading No. 85.01, whether or not there is also a change from any other heading, provided that the production constitutes more than simple assembly.

A change to subheading No. 8512.40 from any other subheading, except from heading No. 85.01 or subheading No. 8512.90; or

A change to subheading No. 8512.40 from heading No. 85.01 or subheading No. 8512.90, whether or not there is also a change from any other subheading, provided that the production constitutes more than simple assembly.

A change to subheading Nos. 8517.10 through 8517.82 from any other heading; or

A change to subheading Nos. 8517.10 through 8517.82 from any other subheading, including another subheading within that group, provided that the production constitutes more than simple assembly.

A change to subheading Nos. 8528.10 through 8528.20 from any other subheading, including another subheading within that group; or

A change to a completed or finished television receiver of subheading Nos. 8528.10 through 8528.20 from an incomplete or unfinished television receiver of subheading Nos. 8528.10 through 8528.20, provided that either the unfinished television receiver or the tube is of domestic origin.

A change to subheading Nos. 8531.10 through 8531.80 from any other subheading, including another subheading within that group, except from subheading No. 8531.90; or

A change to subheading Nos. 8531.10 through 8531.80 from subheading No. 8531.90, whether or not there is also a change from any other subheading, provided that the production constitutes more than simple assembly.

A change to subheading Nos. 8541.10 through 8542.90 from any other subheading, including another subheading within that group; or

A change to a mounted chip, die or wafer of subheading Nos. 8541.10 through 8542.90 from an unmounted chip, die or wafer of subheading Nos. 8541.10 through 8542.90; or

A change to a programmed “read only memory” (ROM) chip of subheading Nos. 8541.10 through 8542.90 from an unprogrammed “programmable read only memory” (PROM) chip of subheading Nos. 8541.10 through 8542.90, whether or not there is also a change from any other subheading.

A change to heading No. 86.03 from any other heading, except from heading No. 86.07; or

A change to heading No. 86.03 from heading No. 86.07, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other heading.

A change to heading No. 86.04 from any other heading, except from heading No. 86.07; or

A change to heading No. 86.04 from heading No. 86.07, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other heading.

A change to heading Nos. 86.05 through 86.06 from any other heading, including another heading within that group, except from heading No. 86.07; or

A change to heading Nos. 86.05 through 86.06 from heading No. 86.07, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other heading.

A change to subheading No. 8607.11 from any other subheading, except from subheading Nos. 8607.12 or 8607.19; or

A change to subheading No. 8607.11 from subheading No. 8607.19, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other subheading, except from subheading No. 8607.12.

A change to subheading No. 8607.12 from any other subheading, except from subheading No. 8607.11 or 8607.19; or

A change to subheading No. 8607.12 from subheading Nos. 8607.11 or 8607.19, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other subheading.

A change to a mounted brake lining or pad of subheading Nos. 8607.21 through 8607.99 from any other heading, except from subheading No. 6813.10; or

A change to any other good of subheading Nos. 8607.21 through 8607.99 from any other subheading, including another subheading within that group.

A change to heading No. 87.07 from any other heading, except from subheading No. 8708.29; or

A change to heading No. 87.07 from subheading No. 8708.29, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other heading.

A change to a mounted brake lining of subheading No. 8708.31 from any other heading, except from subheading No. 6813.10, 8431.20, 8431.49, 8709.90 or 8716.90; or

A change to any other good of subheading No. 8708.31 from any other heading, except from subheading No. 8431.20, 8431.49, 8709.90 or 8716.90.

A change to subheading Nos. 8708.40 through 8708.50 from any other subheading, including another subheading within that group, except from subheading No. 8431.20, 8431.49, 8708.99, 8709.90 or 8716.90; or

A change to subheading Nos. 8708.40 through 8708.50 from subheading No. 8708.99, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other subheading, except from subheading No. 8431.20, 8431.49, 8709.90 or 8716.90.

A change to subheading No. 8708.80 from any other subheading, except from subheading No. 8431.20, 8431.49, 8708.99, 8709.90 or 8716.90; or

A change to subheading No. 8708.80 from subheading No. 8708.99, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other subheading, except from subheading No. 8431.20, 8431.49, 8709.90 or 8716.90.

A change to subheading No. 8708.91 from any other subheading, except from subheading No. 8431.20, 8431.49, 8708.99, 8709.90 or 8716.90; or

A change to subheading No. 8708.91 from subheading No. 8708.99, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other subheading, except from subheading No. 8431.20, 8431.49, 8709.90 or 8716.90.

A change to subheading No. 8708.94 from any other subheading, except from subheading No. 8431.20, 8431.49, 8708.99, 8709.90 or 8716.90; or

A change to subheading No. 8708.94 from subheading No. 8708.99, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other subheading, except from subheading No. 8431.20, 8431.49, 8709.90 or 8716.90.

A change to subheading Nos. 8709.11 through 8709.19 from any subheading outside that group, except from subheading No. 8709.90; or

A change to subheading Nos. 8709.11 through 8709.19 from subheading No. 8709.90, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any subheading outside that group.

A change to heading Nos. 87.11 through 87.13 from any other heading, including another heading within that group, except from heading No. 87.14; or

A change to heading Nos. 87.11 through 87.13 from heading No. 87.14, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other heading.

A change to a mounted brake lining or pad of heading No. 87.14 from any other heading, except from subheading No. 6813.10; or

A change to any other good of heading No. 87.14 from any other heading.

A change to subheading Nos. 8716.10 through 8716.80 from any other heading; or

A change to subheading Nos. 8716.10 through 8716.80 from subheading No. 8716.90, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other heading.

A change to heading Nos. 88.01 through 88.02 from any heading outside that group, except from heading No. 88.03; or

A change to heading Nos. 88.01 through 88.02 from any other heading, including another heading within that group, except by application of Rule 2(a) of the General Rules.

A change to subheading Nos. 9003.11 through 9003.19 from any other heading; or

A change to subheading Nos. 9003.11 through 9003.19 from subheading No. 9003.90, whether or not there is also a change from any other heading, except where the change is from both fronts and temples of subheading No. 9003.90.

A change to subheading Nos. 9007.91 through 9007.92 from any other heading, except from lenses of heading No. 90.02; or

A change to subheading Nos. 9007.91 through 9007.92 from lenses of heading No. 90.02, whether or not there is also a change from any other heading, provided that the production constitutes more than simple assembly.

A change to subheading No. 9008.90 from any other heading, except from lenses of heading No. 90.02; or

A change to subheading No. 9008.90 from lenses of heading No. 90.02, whether or not there is also a change from any other heading, provided that the production constitutes more than simple assembly.

A change to subheading No. 9013.90 from any other subheading, except from subheading No. 9002.19; or

A change to subheading No. 9013.90 from subheading No. 9002.19, whether or not there is also a change from any other subheading, provided that the production constitutes more than simple assembly.

A change to an electro-cardiograph or patient monitoring system of subheading Nos. 9018.11 through 9018.19 from printed circuit assemblies of those subheadings or any other subheading, including another subheading within that group, provided that the production constitutes more than simple assembly; or

A change to any other good of subheading Nos. 9018.11 through 9018.19 from any other subheading, including another subheading within that group.

A change to subheading No. 9018.39 from any other subheading, except from surgical tubing of subheading No. 4009.10; or

A change to subheading No. 9018.39 from surgical tubing of subheading No. 4009.10, whether or not there is also a change from any other subheading, provided that the production constitutes more than simple assembly.

A change to a defibrillator of subheading No. 9018.90 from printed circuit assemblies of subheading No. 9018.90 or from any other subheading, provided that the production constitutes more than simple assembly; or

A change to any other good of subheading No. 9018.90 from any other subheading, except from synthetic rubber of heading No. 40.02 or from subheading No. 9001.90; or

A change to any other good of subheading No. 9018.90 from synthetic rubber of heading No. 40.02 or from subheading No. 9001.90, whether or not there is also a change from any other subheading, provided that the production constitutes more than simple assembly.

A change to subheading No. 9021.19 from any other subheading, except from nails of heading No. 73.17 or screws of heading No. 73.18; or

A change to subheading No. 9021.19 from nails of heading No. 73.17 or screws of heading No. 73.18, whether or not there is also a change from any other subheading, provided that the production constitutes more than simple assembly.

A change to subheading No. 9032.90 from any other heading, except from heading No. 85.37; or

A change to subheading No. 9032.90 from heading No. 85.37, whether or not there is also a change from any other heading, provided that the production constitutes more than simple assembly.

A change to heading Nos. 91.01 through 91.07 from any heading outside that group, except from heading Nos. 91.08 through 91.10; or

A change to heading Nos. 91.01 through 91.07 from unassembled complete movements of subheading No. 9110.11 or 9110.90, or from rough movements of subheading No. 9110.19 or 9110.90, whether or not there is also a change from any heading outside that group.

A change to heading Nos. 91.08 through 91.09 from any heading outside that group, except from heading No. 91.10; or

A change to heading Nos. 91.08 through 91.09 from unassembled complete movements of subheading No. 9110.11 or 9110.90, or from rough movements of subheading No. 9110.19 or 9110.90, whether or not there is also a change from any heading outside that group.

A change to subheading Nos. 9111.10 through 9111.80 from any subheading outside that group, except from subheading No. 9111.90; or

A change to subheading Nos. 9111.10 through 9111.80 from subheading No. 9111.90, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any subheading outside that group.

A change to subheading Nos. 9112.10 through 9112.80 from any subheading outside that group, except from subheading No. 9112.90; or

A change to subheading Nos. 9112.10 through 9112.80 from subheading No. 9112.90, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any subheading outside that group.

A change to heading Nos. 92.01 through 92.08 from any other heading, including another heading within that group, except from heading No. 92.09; or

A change to heading Nos. 92.01 through 92.08 from heading No. 92.09, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other heading.

A change to heading Nos. 93.01 through 93.04 from any other heading, including another heading within that group, except from heading No. 93.05; or

A change to heading Nos. 93.01 through 93.04 from heading No. 93.05, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other heading.

A change to subheading Nos. 9401.10 through 9401.80 from any subheading outside that group, except from subheading Nos. 9401.90 or 9403.10 through 9403.90; or

A change to subheading Nos. 9401.10 through 9401.80 from subheading No. 9401.90 or 9403.90, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any subheading outside that group, except from subheading Nos. 9403.10 through 9403.80.

A change to heading No. 94.02 from any other heading, except from subheading Nos. 9401.10 through 9401.90 or 9403.10 through 9403.90; or

A change to heading No. 94.02 from subheading No. 9401.90 or 9403.90, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other heading.

A change to subheading Nos. 9403.10 through 9403.80 from any subheading outside that group, except from subheading Nos. 9401.10 through 9401.90 or 9403.10 through 9403.90; or

A change to subheading Nos. 9403.10 through 9403.80 from subheading No. 9401.90 or 9403.90, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any subheading outside that group.

A change to subheading Nos. 9405.10 through 9405.60 from any subheading outside that group, except from subheading Nos. 9405.91 through 9405.99; or

A change to subheading Nos. 9405.10 through 9405.60 from subheading Nos. 9405.91 through 9405.99, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any subheading outside that group.

A change to heading No. 95.01 from any other chapter, except from heading No. 87.14; or

A change to heading No. 95.01 from heading No. 87.14, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other chapter.

A change to a toy of subheading Nos. 9503.41 through 9503.49 from any other heading; or

A change to a toy of subheading Nos. 9503.41 through 9503.49 from parts or accessories of those subheadings, whether or not there is also a change from any other heading; or

A change to a part or accessory of subheading Nos. 9503.41 through 9503.49 from any other heading, except from heading No. 61.11, 62.09 or 95.02.

A change to subheading Nos. 9607.11 through 9607.19 from any other subheading, except from subheading No. 9607.20; or

A change to subheading Nos. 9607.11 through 9607.19 from subheading No. 9607.20, except by application of Rule 2(a) of the General Rules, whether or not there is also a change from any other subheading.