Government of Canada / Gouvernement du Canada
Symbol of the Government of Canada

Search

United States Surtax Remission Order (SOR/2018-205)

Regulations are current to 2024-11-26 and last amended on 2019-06-25. Previous Versions

SCHEDULE 1(Subsection 1(1) and paragraph 1(2)(a))

Column 1
ItemDescription of Goods
1Semi-finished product of cold-rolled annealed spring steel of grade SAE 1095
2Flat-rolled product, of a width of 600 mm or more, not further worked than hot-rolled, pickled, of grade ASTM A1039 (500LA), of a nominal thickness of 0.039 inch
3Flat-rolled product of grade HPS 70 W
4Flat-rolled product for production of large diameter line pipe of grade X65 or X70 (API 5L)
5Flat-rolled product, not further worked than cold-rolled, in coils, of Martensitic grades
6Flat-rolled product, batch annealed tin plate
7Flat-rolled product of iron, non-alloy or other alloy steel, electrogalvanized
8Flat-rolled product, galvanized, of grade TRIP TRC400Y/690T, of a width of 600 mm or more, of a thickness of 0.057 inch or more
9Flat-rolled product, galvannealed, of grade ASTM A653/HSLA 050XK, of a width of 70 inches
10Flat-rolled product, with aluminized coating, of a thickness not exceeding 2.8 mm, of a width not exceeding 863 mm, meeting standard ASTM A929 or CSA G401
11Flat-rolled product of iron, non-alloy or other alloy steel, aluminized
12Flat-rolled product, not further worked than cold-rolled, of specification MS-264-060XK
13Flat-rolled product, not further worked than cold-rolled, of grade C1010 SAEJ403, of tensile strength from 70,000 to 84,000 psi inclusive, of elongation on 2 inches of 3%, of a minimum yield strength of 65,000 psi
14Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.25 inch, of a width of more than 8 inches to 12 inches inclusive
15Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.375 inch, of a width of more than 10 inches to 12 inches inclusive
16Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.5 inch, of a width of more than 10 inches to 12 inches inclusive
17Flat-rolled product or flat bar, of iron or non-alloy steel, not in coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.625 inch, of a width of more than 10 inches to 12 inches inclusive
18Semi-finished product or bar and rod, of ductile cast iron of grade 65-45-12
19Bar and rod, of grade 4130, vacuum degassed, of hardness of minimum 197 HBW and maximum 237 HBW, of a minimum tensile strength of 95,000 psi, of a minimum yield strength of 75,000 psi, of a diameter of up to 12 inches inclusive
20Bar and rod, of grade 4140, vacuum degassed, of hardness of minimum of 205 HBW and maximum of 237 HBW, of a minimum tensile strength of 100,000 psi, of a minimum yield strength of 80,000 psi, of a diameter of up to 12 inches inclusive
21Bar and rod, of grade 4130, vacuum degassed, of hardness of minimum 237 HBW, of a minimum tensile strength of 115,000 psi, of a minimum yield strength of 100,000 psi, of a diameter of up to 12 inches inclusive
22Bar and rod, of grade 4140 or 4145, vacuum degassed, of hardness of minimum of 253 HBW, of a minimum tensile strength of 125,000 psi, of a minimum yield strength of 110,000 psi, of a diameter of up to 12 inches inclusive
23Bar and rod, of grade 4140, heat treated and stress relieved, of a diameter of up to 12 inches, and of a hardness of minimum 32 RC and maximum 34 RC or of a minimum yield strength of up to 130,000 psi
24Bar and rod, of grade 4340, heat treated and stress relieved, of a diameter of up to 12 inches, and of a hardness of minimum 32 RC and maximum 36 RC or of a minimum yield strength of up to 140,000 psi
25Bar and rod, annealed, of grade 4140, of a diameter of less than 4 inches or of more than 7 inches to 12 inches inclusive
26Bar and rod, of grade 8620, of a diameter of more than 7 inches to 12 inches inclusive
27Bar and rod, of proprietary grade SW85, of a diameter from 4.0625 to 12 inches inclusive
28Bar and rod, of iron or non-alloy steel, of grade AISI 1018 (ASTM A108), of a diameter of more than 7 inches to 12 inches inclusive
29Bar and rod, of iron or non-alloy steel, nitrocarburized or oxidized, of a minimum yield strength of 75,000 psi, of maximum surface finish of 16 RMS
30Bar and rod, of iron or non-alloy steel, of grade ASTM A108, of a diameter of more than 4 inches
31Bar and rod, of iron or non-alloy steel, chrome plated, of a minimum yield strength of up to 120,000 psi inclusive
32Standard I sections S of 3 inches by 5.7 inches, of specification ASTM A529 Grade 50
33Bar and rod, hot-rolled, in irregularly wound coils, of stainless steel, of grade 17-7, 201, 208Lsi, 302, 302HQ, 304, 304L, 305, 308L, 309L, 309Lsi, 310, 314, 316, 316L, 316Lsi, 321, 327, 409, 409NB, 410, 420, 430, 430L or 450
34Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of grade A286, 13-8, 15-5, 15-5 PH, 17-4, 17-4 PH, 201, 303, 303Se, 304, 304L, 316, 316L, 321, 327, 347, 409, 410, 420, 430, 450, AMS Custom 465 or 2304
35Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade 13-8, 15-5, 15-5 PH, 17-4, 201, 303, 304, 304L, 316, 316L, 321, 327, 409, 410, 420, 430, 450 or 465
36Bar and rod, of stainless steel, of grade 201, 304, 304L, 316, 316L, 321, 327, 409, 420, 430 or 450, of a diameter of less than 8 inches
37Bar and rod, of stainless steel, chrome plated
38Angle, shape and section, of stainless steel, of grade 201, 304, 304L, 316, 316L, 321, 327, 409, 420, 430 or 450
39Wire of stainless steel, hot-rolled and annealed, soap coated, of type 304L, of a diameter of 0.312 inch
40Wire of stainless steel, nickel coated, of type 302 (ASTM A313 specification), of a diameter of up to 5.25 mm
41Wire of stainless steel, nickel coated, of type 17-7PH (ASTM A313 specification), of a diameter of up to 5.25 mm
42Flat-rolled product, of grade Mangabraze
43Flat-rolled product, aluminized, of specification GMW2M-ST-S-CR5-T1M-120
44Bar and rod, of grade 4715, vacuum degassed, of hardness of minimum 56 HRC and maximum 62 HRC, of a minimum tensile strength of 119,000 psi, of a minimum yield strength of 95,000 psi, of a diameter of up to 7 inches
45Bar and rod of grade 1522CV
46Bar and rod of alloy Aermet 100
47Bar and rod, of proprietary grade Finkl Steel FX-Xtra, of a diameter of up to 16 inches
48Bar and rod, of proprietary grade Finkl Steel MLQ (mold lens quality) P20
49Bar and rod, of proprietary grade Finkl Steel MD or MDI (mold quality steel) P20
50Bar and rod of proprietary grade Microtec 4M95
51Bar and rod of proprietary grade Impact 7
52Bar and rod, not further worked than cold-formed or cold-finished, of grade 5140H
53W-section beams
54Chrome silicon spring wire
55Wire of chrome silicon valve quality
56Pipe and tube, drawn over mandrel (DOM) of specification SP-TU-001
57Pipe and tube, drawn over mandrel (DOM) of specification ASTM A513 Type 5
58Pipe and tube, cold drawn, seamless
59Pipe and tube, seamless, cold drawn of specification SP-TU-009
60Pipe and tube, seamless, hot-rolled of specification SP-TU-002
61Pipe and tube, hot finished seamless pressure tubing, of grade 1026, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive
62Pipe and tube, hot finished seamless pressure tubing, of grade 4130, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive
63Pipe and tube, hot finished seamless pressure tubing, of grade 4140, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive
64Pipe and tube, hot finished seamless pressure tubing, of proprietary grade Impact 7, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive
65Coiled tubing, of an outside diameter from 0.75 inch to 3.5 inches inclusive, of a length of up 10,000 meters, of a wall thickness from 0.08 inch to 0.3 inch inclusive, of a kind used in drilling for oil or gas
66Pipe and tube, of iron, non-alloy or other alloy steel, aluminized
67Pipe and tube, of circular, square, rectangular or other non-circular cross section, of iron, non-alloy steel, alloy steel or stainless steel, in-line galvanized
68Pipe and tube, welded, of grade 4140, of circular cross-section
69Pipe and tube, welded, of grade 4142, of circular cross-section
70Pipe and tube, straight seam, electric resistance welded, of circular cross-section of an outside diameter of more than 16 inches up to 20 inches inclusive, of a wall thickness of up to 0.625 inches, of grade CSA G40.21
71Pipe and tube, electric resistance welded (ERW) drawn over mandrel (DOM) of any specification
72Pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.125 inch, of outside diameter of 0.405 inch
73Pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.25 inch (6.35 mm), of outside diameter of 0.540 inch
74Pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.375 inch, of outside diameter of 0.675 inch
75Coiled tubing, of other alloy steel, of an outside diameter from 0.75 inch to 3.5 inch inclusive, of a length of up 10,000 meters, of a wall thickness from 0.08 inch to 0.3 inch
76Pipe and tube, of square section, of a cross-sectional dimension of more than 12 inches up to 16 inches inclusive
77Pipe and tube, straight seam, electric resistance welded, of square and equivalent rectangular sections, of dimensions of more than 12 inches by 12 inches up to 16 inches by 16 inches inclusive, of thickness of up to 0.625 inch, of grade CSA G40.21, ASTM A252 or ASTM A500
78Pipe and tube, straight seam, electric resistance welded, of square section, of dimension of 1.5 inch by 1.5 inch, of a thickness of 0.25 inch, of grade CSA G40.21, ASTM A252 or ASTM A500
79Pipe and tube, welded, of non-circular cross-section other than square or rectangular, of grade AISI 1526
80Pipe and tube, welded, of non-circular cross-section other than square or rectangular, of grade AISI 4130
81Aluminum plate, sheet and strip, of alloy AA3002, AA3003, AA3004, AA3104, AA3105, AA3105-H12, AA3105-H24, AA5005, AA5052, AA5083, AA5086, AA5182, AA5205, AA5251, AA5454, AA5657, AA5754, AA6005A, AA6014, AA6016, AA6061, AA6083, AA6111, AA6181A/AA6005A or AA6451, of a thickness from 0.2 mm to 9.2 mm inclusive
82Aluminum composite material consisting of aluminum sheets bonded by a thermoplastic core
83Aluminum cans of a size from 89 ml to 1000 ml
84Flat-rolled product, not further worked than hot-rolled, of proprietary grade Usibor 1500, of a thickness from 0.8 mm to 2.5 mm inclusive, of a width of up to 1650 mm
85Flat-rolled product, hot-rolled, pickled and oiled, of grade HSLA 420LA, of specification SAE2340, of a minimum thickness from 0.055 inch to 0.066 inch inclusive
86Flat-rolled product, hot-rolled, pickled and oiled, of grade HSLA 500LA, of specification GMW3032M-ST-S, of a minimum thickness of 0.045 inch
87Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 50, of a minimum thickness of 0.06 inch, of a width of 51.9 inches or 56.5 inches
88Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 50, of a minimum thickness of 0.066 inch, of a width of 53.1 inches
89Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.047 inch or 0.058 inch
90Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a nominal thickness of 0.063 inch, of a width of 48.475 inches
91Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.066 inch, of a width of 50.9 inch
92Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.067 inch, of a width of 47.4 inches or 53.2 inches
93Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness from 0.044 inch to 0.06 inch inclusive
94Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a nominal thickness of 0.063 inch or 0.064 inch
95Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness of 0.067 inch, of a width of 55.916 inches
96Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness from 0.073 inch, of a width of 59.186 inches
97Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness of 0.075 inch, of a width of 54.3, 54.67, 55.5 or 56.5 inches
98Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 80, of a minimum thickness of 0.067 inch, of a width of 50.8 inches
99Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 80, of a minimum thickness of 0.066 inch, of a width of 52.423 or 54.2 inches
100Flat-rolled product, not further worked than hot-rolled, of grade Ympress 100XF, of a thickness of 0.5 inches, of a width of 60 inches, of a length of 120 inches
101Flat-rolled product, not further worked than cold-rolled, of grade CR420LA, of specification GMW3032M-ST-S, of a thickness of 0.08 inches or more
102Flat-rolled product, not further worked than cold-rolled, of grade HSLA 70, of a minimum thickness of 0.0566 inch, of a width of 45.863 inches
103Flat-rolled product, not further worked than cold-rolled, of grade HSLA 70, of a minimum thickness of 0.0606 inch, of a width of 46.3 inches
104Flat-rolled product, in coils, not further worked than cold-rolled, of grade 1074, of a thickness from 0.032 inch to 0.165 inch inclusive, of a width from 24.98 inches to 48 inches inclusive
105Flat-rolled product, galvanized, of specification HR-550-610-LA-S-G160/60 U, of a nominal thickness of less than 2.0 mm
106Flat-rolled product, galvanized, of specification GMW3023M-ST-S-HR550LA, of a nominal thickness of less than 2.0 mm
107Flat-rolled product, galvanized, of grade HSLA 50, of a minimum thickness of 0.17 inch
108Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.066, 0.0667, 0.067, 0.073, 0.074 or 0.0743 inch
109Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.083 inch, of a width of 41 inches
110Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.085 inch, of a width of 47.266 inches
111Cold-rolled and hot dipped steel substrate coil, of Grade 50 or 80, of specification ASTM A792, plated or coated with aluminum-zinc alloys, of a thickness of 3.81 mm, of a width of 1041.4 mm
112Flat-rolled product, aluminum-silicon coated, of proprietary grade Usibor 1500, of a thickness from 0.8 mm to 2.5 mm inclusive, of a width of up to 1650 mm
113Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade SA516 Gr 70 normalized, of a thickness of 4.5 inches, of a width of less than 600 mm
114Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade 10B2, of a nominal thickness of 0.12 inch, of a width of 3.65 or 5.2 inches
115Flat-rolled product, not further worked than cold-rolled, of grade 1074, of a width from 1.575 inches to 9.5 inches inclusive
116Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade C1050 or C1075, of specification ASTM A682 or A684, of a thickness of 0.0098 inch or more
117Flat-rolled product of iron or non-alloy steel, nickel and brass coated or plated by an electro-plating process, of a width of less than 600 mm
118Bar and rod, hot-rolled, of grade A105, A350, 1018, 1030, 1040, 1045, 1050 or 1055, vacuum degassed, of a diameter from 2.5 inches to 10 inches inclusive
119Bar and rod, of grade A36, of a thickness of 1.5 inches, of a width of 1.625 inches, of a length of 5.5 inches
120Bar and rod, not further worked than hot-rolled, of grade 4140, of a diameter from 7 inches to 12 inches inclusive, of a minimum yield strength of up to 70,000 psi
121Bar and rod, of grade 60, of specification ASTM A615 or AASHTO M31, epoxy coated, of a diameter from 0.5 inch to 2 inches inclusive
122Cold drawn bar, of grade 1018, of a diameter from 4.5 inches to 5.75 inches inclusive, of specification ASTM A108
123Cold drawn bar, of grade 1144, of a diameter from 2.5 inches to 4.5 inches inclusive, of specification ASTM A311, of a minimum yield strength of 100,000 psi
124Bar and rod, in coils, not further worked than cold-formed or cold-finished, of grade AISI 1010, 1015, 1018, 1020, 1022, 10B22 or 8620, of a diameter from 0.468 inches to 1.46 inches inclusive
125Nitrated round bar, of grade C1045, of minimum yield strength of up to 100,000 psi
126Wire, in coil, of grade AISI 10B35, silicon killed, with phosphate and polymer coating, of a diameter of 1.156 inches
127Wire of iron or non-alloy steel, electro-galvanized
128Flat-rolled product of stainless steel, electro-galvanized, coated with ethylene propylene diene monomer (EPDM), of a thickness from 0.015 to 0.025 inches inclusive, of a width from 1.265 to 1.796 inches inclusive
129Flat-rolled product, of stainless steel, of a width of less than 600 mm, of any grade of the 300 Series
130Rod or wire, of stainless steel, of grade 302, 304 SS, 316, 410 or 410 SS, of specification ASTM A493 or A555, annealed, soap coated, of a diameter from 0.2 inch to 0.672 inch inclusive
131Flat-rolled product, hot-rolled, heat treated, of grade 4142, of a thickness from 0.25 inch to 12 inches
132flat-rolled product of other alloy steel, cold-rolled, galvanized, of specification 50002-LAC550Y620T G160/60 U, of a width of 600 mm or more
133Flat-rolled product, galvanized, of grade HSLA 50, of a minimum thickness of 0.17 inch
134Flat-rolled product, galvanized, of grade HSLA 60, of a minimum thickness of 0.085 inch, of a width of 57.15 inches
135Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.066, 0.073 or 0.074 inch
136Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.083 inch, of a width of 41 inches
137Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.085 inch, of a width of 47.266 inches
138Flat-rolled product, rough machined and rotary ground, of grade O-1, A2, D2, S7, H13 or M2, of a thickness from 0.25 inch to 12 inches, of a width greater than 600 mm
139Flat-rolled product, rough machine and rotary ground, of grade M4, M2 or T15, of a thickness from 0.25 inch to 12 inches, of a width of less than 600 mm
140Flat-rolled product of other alloy steel, cold-rolled, spheroidized and annealed, of grade 4140 or SAE J404 4130, of a thickness from 2.9 mm to 7.1mm inclusive, of a width from 33.78 mm to 245 mm inclusive
141Flat-rolled product of other alloy steel, not further worked than cold-rolled, of grade ASTM A980 M160 Martinsite (MART), of a width of 7.375 inches, with electrogalvanized coating 40G/40G
142Flat-rolled product, rough machined and rotary ground, of grade 4140, 4142, O-1, A2, D2, S7, H13, 1V, 3V, 4V, 9V, 10V or 15V, of a thickness from 0.25 inch to 12 inches, of a width of less than 600 mm
143Flat-rolled product of other alloy steel, galvanized, of specification MS 50002-LAC550Y620T G160/60U, of a thickness of 2.1 mm, of a width of 228.6 mm
144High speed steel round bars, turned, peeled or centerless ground, surface finish, of grade M2, M4, M7, T15, M42, Rex 20, Rex 45 or Rex 76, of a diameter of 0.125 inch to 24 inches inclusive
145Bars and rods of other alloy steel, not further worked than hot-rolled, of alloy 4130, 4140, 4145, 4150, 4320, 4340, 52100, 8620, 8630, 8640 or 9310, vacuum degassed, fine grain, with a section size from 2.5 inches to 10 inches inclusive
146Alloy or tool steel round bars, rough turned, peeled or centerless ground, surface finish, of grade O-1, O6, A2, D2, S7, LescoWear, 1V, 3V, 4V, 9V, 10V or 15V, of a diameter of 0.125 inch to 24 inches inclusive
147Centrifugal cast tube, of alloy SL96L, of an outside diameter of 13 inches, of an inside diameter of 12.625 inches, of a length of 58.56 inches or 65.25 inches
148Mechanical tubing, of grade 4140, of an outside diameter from 6 inches to 10 inches inclusive, of an inside diameter from 4 inches to 8 inches inclusive, of a wall thickness from 1 inch to 2 inches inclusive
149Hollow profile, of stainless steel, of specification ASTM A511
150Tube, seamless, of stainless steel, of grade 304, 316, 317 or 347
151Tube, cold drawn, stress relieved and annealed, of grade AISI 4140 or 8630, of an outside diameter from 1.25 inches to 2.375 inches inclusive, of an inside diameter from 0.851 inch to 1.476 inches inclusive
152Tube, seamless, spray metal (SM), of grade AISI 4140 or 8630, of an outside diameter from 1.22 inches to 2.162 inches inclusive, of an inside diameter from 0.851 inch to 1.29 inches inclusive
153Tube, seamless, quenched and tempered, cold drawn, of grade AISI 4130 or 4140, of an outside diameter from 1.25 inches to 2.375 inches inclusive, of an inside diameter from 0.851 inch to 1.476 inches inclusive
154Tube, welded, of circular cross-section, electrical metallic tubing, conforming to standard UL 797
155Hydraulic tube, of grade J525 1008 or 1010, specification of ASTM SA/214, of an outside diameter from 0.125 inch to 1.5 inches inclusive, of a minimum yield strength of 25,000 psi
156Tube, welded, of stainless steel, of a circular cross-section, of an outside diameter of up to 4.5 inches inclusive
157Tube, drawn over mandrel (DOM), of square or rectangular cross-section, of grade C1010 or C1026
158Tube, welded, of stainless steel, of square or rectangular cross-section, of specification ASTM A240
159Aluminium strip, of grade 5052 H32/34, coated with thermoplastic polyolefin (TPO) and ethylene propylene diene monomer (EPDM), of a thickness of 0.024 inch
160Geodesic dome for storage tanks, of aluminum, of a diameter from 20 feet to 125 feet
161Aluminum coil, of alloy AA3105, painted or coated, of a thickness of 0.019 inch, of a width from 13 inches to 24 inches inclusive
162Fuel tank, of aluminum, of 43 or 55 gallon, of dimensions of 62 inches by 20 inches by 24 inches, with inner poly fuel cell, with a black powder coat finish
163Aluminum horseshoes
164Aluminum bar, rod, tube or profile, of alloy 6105-T5, of a diameter of 3 inches, of a length of 15, 20 or 25 feet
165Round stainless steel wire, of grade 302 or 304, of a diameter from 0.178 mm to 1.092 mm, nickel coated
166Rectangular stainless steel wire, of grade 304, of a dimension of 6.35 mm by a dimension of 0.457 mm, nickel coated
167Square or rectangular stainless steel wire, of grade 301 or 631, of a dimension from 0.089 mm to 18.128 mm by a dimension from 0.305 mm to 5.08 mm, soap coated
168Tube, welded, of circular cross-section, electrical rigid metal conduit, conforming to standard UL 6
169Flat-rolled product, rough machined and rotary ground, of grade 4140 or 4142, of a thickness from 0.25 inch to less than 5 inches, of a width greater than 600 mm
170Alloy or tool steel round bars, rough turned, peeled or centerless ground, surface finish, of grade 4140 HT, P20, L6, or H13, of a diameter of 0.125 inch to 12 inches inclusive
171Hot-rolled annealed plate, of grade 4140, of a thickness from 0.25 inch to 12 inches, of a width of more than 24 inches
172Alloy steel plate, not in coils, not further worked than hot-rolled, of a thickness of 0.25 inch or more, of a width of 23.62 inches or more, of grade 4140 or 4142
173Flat-rolled product of iron or non-alloy steel, in coils, not further worked than hot-rolled, with patterns in relief, of specification ASTM A786, of a thickness of 0.075 inch, of a width of 60 inches
174Flat-rolled product, of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, in coils, of specification UMG 1035 spheroidized and annealed, of a width of 600 mm or more, of a thickness from 0.0984 inch to 0.126 inch inclusive
175Flat-rolled product, of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, in coils, of specification UMG 1050 spheroidized and annealed, of a width of 600 mm or more, of a thickness from 0.0984 inch to 0.122 inch inclusive
176Flat-rolled product of iron or non-alloy steel, hot-rolled, pickled and oiled, in coils, of grade 60 class 2B, of specification ASTM A1011, of a thickness from 0.063 inch to less than 0.066 inch, of a width of up to 46.975 inches
177Flat-rolled product of iron or non-alloy steel, hot-rolled, pickled and oiled, in coils, of specification SAE J2340 340XF, of a thickness from 0.056 inch to less than 0.058 inch, of a width of up to 55.51 inches
178Flat-rolled product of iron or non-alloy steel, hot-rolled, pickled and oiled, in coils, of specification SAE J2340 380XF, of a thickness from 0.055 inch to 0.063 inch inclusive, of a width of up to 57.3 inches
179Flat-rolled product, of iron or non-alloy steel, hot-rolled, picked and oiled, in coils, of specification SAE J1392 050XF, of a width of 600 mm or more, of a thickness of 0.0551 inch to 0.063 inch inclusive
180High carbon flat-rolled product, hot-rolled, pickled and oiled, of grade 1050, of a width of less than 600 mm, of a thickness from 0.056 inch to 0.26 inch inclusive
181Flat-rolled product, of grade 1055/1065, hot-rolled, aluminum killed, one pass (cold-rolled) annealed, of a thickness of 0.22 inch to 0.307 inch (+/- 0.012 inch) inclusive, of a width of 5 inches to 6 inches (+/- 0.02 inch) inclusive
182Flat-rolled product, of iron or non-alloy steel, hot-rolled, in coils, of specification UMG 1050 spheroidized and annealed, of a width from 12.85 inches to 23.6 inches, of a thickness from 0.0984 inch to 0.122 inch inclusive
183Flat-rolled product of other alloy steel, not further worked than hot-rolled, not in coils, of grade CMS-18 or grade CMS-19
184Flat-rolled product, of grade 4142, of a width from 926 mm to 971 mm inclusive
185Flat-rolled product of high speed steel, of a width of less than 600 mm, of proprietary grade Micro-Melt Maxamet, of a thickness from 0.25 inch to 0.458 inch inclusive
186Flat-rolled product, of grade 4130, hot-rolled, annealed, of a thickness from 0.157 inch to 0.276 inch (+/- 0.007 inch) inclusive, of a width of 2.972 inches to 7.886 inches (+/- 0.02 inch) inclusive
187Flat-rolled product, of grade 8620, hot-rolled, annealed, of a thickness of 0.348 inch (+/- 0.01 inch), of a width of 5.788 inches (+/- 0.02 inch)
188Flat-rolled product of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled, of proprietary grade NiMark 300 Hi temperature alloy, of a thickness from 0.25 inch to 0.458 inch inclusive
189Flat-rolled product of other alloy steel, not further worked than hot-rolled, not in coils, of proprietary grade Carpenter CTS XHP, of a thickness from 0.108 inch to 0.32 inch inclusive, of a width of 4 inches to 20 inches inclusive
190Flat-rolled product, dual phased steel, in coils, of specification GMW3399M-ST-S-CR590T/340Y-DP-UNCOATED-U, of a width from 1,361 mm to 1,500 mm inclusive, of a thickness of 1.1 mm or 1.2 mm
191Flat-rolled product, in coils, cold-rolled, of specification GMW3032M-ST-S-CR420LA, of a thickness of 1.2 mm (+/- 0.06 mm), of a width of 645.414 mm
192Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of specification SAE J2340 420XF, of a thickness from 0.052 inch to 0.058 inch inclusive, of a width of up to 50.625 inches
193Flat-rolled products of iron or non-alloy steel, in coils, cold-rolled, of specification HSLA SAE J2340 420XF, of a thickness from 0.057 inch to 0.061 inch inclusive, of a width of up to 53.525 inches
194Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 060 class 2, of specification ASTM A1011, of a thickness from 0.055 inch to 0.063 inch inclusive, of a width of up to 50.775 inches
195Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 060 class 2, of specification ASTM A1011, of a thickness from 0.0295 inch to 0.035 inch inclusive, of a width of up to 56.475 inches
196Flat-rolled product, in coils, cold-rolled, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm, of a thickness of 1.2 mm (+/- 0.06 mm)
197Flat rolled product of iron or non-alloy steel, of grade C1022, C1045, C1055, C1060, C1067, C1070, C1074 or C1095, annealed, of specification ASTM A682 or A684, of a thickness of more than 0.0098 inch, of a width of less than 23.625 inches, not clad, plated or coated, not further worked than cold-rolled (cold-reduced)
198High carbon flat-rolled product, of grade 1095, of a width of less than 600 mm, of a thickness from 0.0098 inch to 0.255 inch inclusive, not further worked than cold-rolled
199Flat-rolled product, of grade 1020, cold-rolled, annealed, of a thickness of 0.1595 inch (+/- 0.0015 inch), of a width from 7.663 inches to 8.926 inches (+/- 0.02 inch) inclusive
200Flat-rolled product, of grade 1050, cold-rolled, annealed, of a thickness of 0.157 inch (+/- 0.003 inch), of a width of 4.925 inches (+/- 0.02 inch)
201Flat-rolled product, of grade 1018 AK (aluminum killed), cold-rolled, annealed, of a thickness of 0.048 inch to 0.2155 inch (+/- 0.002 inch) inclusive, of a width from 2 inches to 9.32 inches (+/- 0.02 inch) inclusive
202Flat-rolled product, of grade 1018 SK (silicon killed), cold-rolled, annealed, of a thickness of 0.079 inch to 0.174 inch (+/- 0.002 inch) inclusive, of a width of 1.53 inches to 5.8 inches (+/- 0.01 inch) inclusive
203Flat-rolled product, of grade 1020 AK (aluminum killed), cold-rolled, annealed, of a thickness of 0.222 inch (+/- 0.002 inch), of a width of 3.4 inches (+/- 0.01 inch)
204Flat-rolled product, of grade 10B21, cold-rolled, annealed, of a thickness of 0.104 inch to 0.196 inch (+/- 0.006 inch) inclusive, of a width of 1.938 inches to 5.976 inches (+/- 0.02 inch) inclusive
205Flat-rolled product of other alloy steel, cold-rolled, of specification high strength-SAE J2340, of grade 380XF CR, of a width of 600 mm or more, of a thickness from 0.045 inch to 0.049 inch inclusive
206Flat-rolled product, in coils, of specification 4142 HR, of a width from 36.481 inches to 38.211 inches inclusive, of a thickness from 0.1795 inch to 0.2415 inch inclusive
207Flat-rolled product of other alloy steel, of a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), of proprietary grade Hiperco 50 Alloy, of a thickness from 0.001 inch to 0.385 inch inclusive
208Flat-rolled product, of grade 4130, cold-rolled, annealed, of a thickness of 0.069 inch to 0.236 inch (+/- 0.006 inch) inclusive, of a width of 1.4 inches to 11.108 inches (+/- 0.02 inch) inclusive
209Flat-rolled product, of grade 4140, cold-rolled, annealed , of a thickness of 0.118 inch to 0.236 inch (+/- 0.002 inch), of a width of 3.22 inches to 5.551 inches (+/- 0.02 inch)
210Flat-rolled product, of grade 8620 or 8620 H, cold-rolled, annealed, of a thickness of 0.093 inch to 0.348 inch (+/- 0.002 inch) inclusive, of a width of 2.808 inches to 7.360 inches (+/- 0.02 inch) inclusive
211Flat-rolled product, cold-rolled, in coils, of specification TSG3100G SPC980DU-T, of a thickness from 0.037 inch to 0.041 inch inclusive, of a width of up to 52.285 inches
212Flat-rolled product, of grade 8620, hot-rolled and one pass (cold-rolled), annealed, of a thickness of 0.315 inch (+/- 0.004 inch), of a width of 5.35 inches (+/- 0.02 inch)
213Flat-rolled product, of zinc-aluminum-magnesium alloy, of registered trademark ZAM, in coils, of specification ASTM-A1046/A1046M, MSM-CC-DZC 90 or MSM-CE-DZC 120, of a thickness of 0.02 inch to 0.2 inch inclusive, of a width of 32 inches or more
214Flat-rolled product of iron or non-alloy steel, galvanized, of specification ASTM A653 SS, of grade 080 G90, of a thickness from 0.044 inch to 0.061 inch inclusive, of a width from 50.655 inches to 55.655 inches inclusive
215Flat-rolled product, with polymer coating, of a thickness not exceeding 2.8 mm, of a width not exceeding 863 mm, meeting standard ASTM A929 or CSA G401
216Bar and rod, of ductile cast iron of grade 80-55-06
217Bar and rod, of gray iron or ductile iron continuous cast, of grade 100-760-02, G-2 (class 40 gray iron) or 201-NI-RESIS
218Bar and rod, in coils, not further worked than cold-formed or cold-finished, of grade AISI 1010, 1015, 1018, 1020 or 1022, of a diameter from 1.25 inches to 1.47 inches inclusive
219Bar and rod, in coils, not further worked than cold-formed or cold-finished, of grade AISI 1045, 10B21 or 8620, of a diameter of more than 1 inch to 1.47 inches inclusive
220Bar and rod, not further worked than cold-formed or cold-finished, of grade 1045 or 1050, of a minimum yield strength of 100,000 psi, of specification ASTM A-311, of a diameter from more than 3 inches to 12 inches inclusive
221Bar and rod, hot-rolled, in irregularly wound coils, of silico-manganese steel, of grade 300M, of diameter of more than 0.765 inch to 12 inches inclusive
222Bar and rod, of silico-manganese steel, of grade 300M-HS, of a diameter from more than 4.062 inches to 12 inches inclusive
223Bar and rod, of grade 4330, 4330M or 4330NiMo5VCa4, of minimum yield strength of up to 165,000 psi inclusive, of a diameter from more than 4.062 inches to 12 inches inclusive
224Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4330V MOD, of an outside diameter of 4.75 inches
225Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 4145H MOD, of an outside diameter of 5 inches, 8 inches or 8.75 inches
226Round bar of alloy steel, of AISI grade E8720Ca4 or E9313-15MCa4, calcium treated, electric furnace forged, vacuum degassed, not further worked than hot-rolled, hot-drawn or extruded, of specifications ASTM A255, ASTM E45 or European Standard EN 10204
227Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade M-50 or 4330V, of a diameter from 0.5 inch to 12 inches inclusive
228Bar, of grade SAE 4340, of specification AMS 6414, of a diameter of up to 12 inches inclusive, vacuum remelted, of a kind used in aerospace application
229Bar, of grade SAE 52100, vacuum remelted, of specification AMS 6440 or AMS 6444, of a kind used in aerospace application
230Bar, of grade AISI 440C, of specification AMS 5618, electrode vacuum remelted, of a kind used in aerospace application
231Bar, of grade M50, of specification AMS 6491, vacuum melted and remelted, of a kind used in aerospace application
232Bar, of grade M50Nil, of specification AMS 6278, vacuum melted and remelted, of a kind used in aerospace application
233Bar and rod, of other alloy or non-alloy steel, not further worked than cold-formed or cold-finished, of proprietary grade Premomax or Biodur Carpenter CCM alloy, of a diameter from 1 inch to 12 inches inclusive
234Bar, turned, ground and/or polished, not further worked than cold-formed, cold-drawn or cold-finished, of grade 4140 or 8620, of a diameter from 1.25 inches to 1.5 inches inclusive, of a length of more than 24 feet to 40.2 feet inclusive
235Tubes, pipes and hollow profiles, seamless, of stainless steel, of circular cross-section, of grades 15-15LC Mod hollow bar or 15-15HS max hollow bar, of an inside diameter from 2 inches to 10 inches inclusive
236Pipe and tube, seamless, of grade 4130, 4130M, 4140, 4140Ca4 or 4145, of an outside diameter of up to 3 inches inclusive, of a wall thickness of up to 0.5 inch inclusive
237Electric fusion welded carbon pipe, of specification ASTM A672, of grade C70, of outside diameter of 28 inches, of an inside diameter of 26.5 inches, of a wall thickness of 0.75 inch
238Line pipe of a kind used for oil or gas pipeline, drawn over mandrel (DOM), of grade 1026, of an outside diameter of 3 inches, of an inside diameter of 1.75 inches or 2.375 inches
239Line pipe of a kind used for oil or gas pipeline, of grade 1026, of an outside diameter of 3.63 inches, of an inside diameter of 3 inches
240Tube, welded, of grade AISI 1026, of an outside diameter of 1.9 inches, of a wall thickness of 0.4 inch
241Tube, welded, of grade AISI 1526, of an outside diameter from 1.05 inches to 1.9 inches inclusive, of a wall thickness from 0.225 inch to 0.34 inch
242Tube, welded, of grade AISI 4140, of an outside diameter of 1.778 or 1.784 inches, of an inside diameter of 1.322 inches or 1.328 inches
243Tube, percussion welded (PEW), of specification SAE J526 1005-1010, of an outside diameter of 0.312 inch, of a wall thickness of 0.03 inch
244Tube, percussion welded (PEW), of specification SAE J526 1005-1010, of an outside diameter of 0.25 inch, of a wall thickness of 0.035 inch
245Pipe and tube, of stainless steel, of an outside diameter of 2 inches, of a wall thickness of 1.5 mm, of specification ASTM A554
246Tubes and pipes, welded, of circular cross-section, of grade 15B27MC, 15B27M, 15B27, 15B30M or 15B34, of a wall thickness from 3 mm to 6 mm inclusive, of a diameter from 20 mm to 40 mm inclusive
247Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 1.97 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513
248Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 2.36 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513
249Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 4.72 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513
250Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 4.72 inches by 2.36 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513
251Carbon steel welding wire, of trademark NS-115 CopperFree, of a diameter of 0.035 inch to 0.062 inch inclusive, of specification CSA W48-14 B-G49A 3 C1 S6
252Wire, of mild steel, not clad, of a diameter of 1 mm, of specification AWS A5.18/A5.18M or CSA W48.14
253Oil tempered Class 2 spring wire, of a diameter of more than 0.531 inch
254Rub rail of alloy steel, hot-rolled, of grade A529-50, of a height of 2.5 inches, of a width of 0.375 inch, of a length of 24 feet
255Hot-rolled structural steel coil, of grade 36 Type 1, of specification ASTM A1011, of a nominal thickness of 0.059 inch, of a width of 59.5 inches
256High Carbon steel flat bar, cold-rolled, annealed, of grade 4340, of a thickness of 0.282 inches, of a width of 1 inch
257Hot-rolled round bar, of alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 5160 or 5160H, of a diameter of 0.562 inch to 0.748 inch inclusive
258Hot-rolled flat bar, of alloy steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 5160 or 5160H, of a thickness from 0.187 inch to 0.236 inch, of a width from 0.499 inch to 1.250 inches inclusive
259Bar of other alloy steel, of specification AMS 5743J or AM-355, water quenched heat treat process, of a diameter of 5.125 inches, with a maximum cobalt content of 0.4% by weight
260Bar, hot-rolled, of grade 5160H, of a diameter of 0.5625 inch, 0.59375 inch, 0.625 inch, 0.65625 inch, 0.6875 inch or 0.71875 inch
261Bar, hot-rolled, turned and polished, of grade 5160H, of a diameter of 0.875 inch
262Bar, hot-rolled, turned and polished, of grade 51B60H, of a diameter of 1.25 inch
263Wire of iron or non-alloy steel, of specification ASTM A475, electro galvanized, class A coating, of a thickness from 0.05 inch to 0.25 inch inclusive
264Wire of iron or non-alloy steel, of specification ASTM A475, electro galvanized, class B coating, of a thickness from 0.05 inch to 0.25 inch inclusive
265Wire of iron or non-alloy steel, of specification ASTM A475, electro galvanized, class C coating, of a thickness from 0.05 inch to 0.25 inch inclusive
266Wire of iron or non-alloy steel, of specification ASTM B341, plated with aluminum, of a thickness from 0.09 inch to 0.2 inch inclusive
267Wire of stainless steel, nickel coated, of type 304, 304L, 316 or 631, of specification ASTM A313 or ASTM A580, of a diameter of up to 5.75 mm
268Rebar, in irregularly wound coils, of stainless steel, of grade 2304 or 2205, of specification ASTM A-955, of a thickness from 0.375 inch to 1.75 inches inclusive, of a yield strength of 65,000 psi
269Bar and rod, of stainless steel, hot-rolled, in irregularly wound coils, of grade 25NI-20CR-6MO or 22CR-13NI-5MIN, of specification type 304, type 304L or type 303, of a diameter from 0.12 inch to 0.75 inch inclusive
270Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section, of grade SCF 19 alloy, of a diameter from 3.5 inches to 10.5 inches inclusive
271Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-564 type 630
272Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-638 type 660
273Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-705 type XM-13 or ASME SA-705 type 630
274Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-479 type 304L
275Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASME SA-540, of grade B21, B22, B23 or B24
276Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular or other cross-section, of specification ASTM A434, of grade BD
277Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade project 70+ of specification type 304/304L Stainless or project 70+ of specification custom 630 (17CR-4NI), of a diameter from 3.25 inches to 10 inches inclusive
278Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade project 70+ 15CR-5NI stainless, of specification type 34700, type 416 or type 416 RS, of a diameter from 1 inch to 10.75 inches inclusive
279Bar and rod, of stainless steel, turned, ground and/or polished, not further worked than cold-formed, cold-drawn or cold-finished, of grade 431 or XM19, of a diameter from 1.25 inches to 1.5 inches inclusive
280Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade 416, of specification ASTM A582, of a thickness from 0.375 inch to 5 inches inclusive
281Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section, of grade 2205 or 2304
282Tubes, pipes and hollow profiles, of stainless steel, of circular cross-section, of specification ASTM A-500 Grade C
283Pipe and tube, welded, of stainless steel, of grade 18 Cr Cb, of an outside diameter of 2 inches, of a wall thickness of 1.5 mm, of specification ASTM A554
284Pipe and tube, welded, of stainless steel, of grade 439, of an outside diameter of up to 1 inch inclusive, of a wall thickness of up to 1.5 mm inclusive, of specification ASTM A554
285Aluminum I-Beam, of alloy AA6061
286Aluminum bars, rods and profiles, of any alloy of the 7000 series
287Aluminum bars, rods, profiles or castings, of aluminum bronze alloy, of specification ASME SB-271, of type C95400
288Aluminum plates, sheets and strip, of alloy AA1350, AA2024, AA 2124, AA2198, AA2219, AA2324, AA2524, AA5052, AA6013 or AA6061
289Aluminum plates, sheets and strip, of any alloy of the 5000 series (including alloy 5052), of temper H32, H32P or H242, of a thickness exceeding 0.2 mm but less than 7 mm
290Aluminum plates, sheets and strip, of any alloy of the 7000 series (including alloy 7040, 7050, 7055, 7075, 7085, 7140, 7150, 7175, 7474 or 7475)
291Aluminum plates, sheets and strip, pre-painted, of grade 3003 or 5052, of temper H14, H32, or H34
292Aluminum plates, sheets and strip, in coils, of alloy 5042, of temper H2E72 or H25, coated
293Aluminum plates, sheets and strip, in coils, of alloy 5352, of temper H2E77, coated
294Aluminum plates, sheets and strip, in coils, of alloy 5042 or 5182, of temper H48, coated
295Aluminum reservoirs, tanks, vats and similar containers, of alloy AA5052, of a diameter of 12 inches
296Aluminum collapsible tubular container, of alloy 1070, whether or not lined or heat-insulated, of a diameter of up to 2 inches inclusive, of a length of up to 8 inches inclusive
297Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade Custom 465, of specification AMS 5936, of a diameter of up to 8 inches
298Flat-rolled product, of grade SA 516-70, HIC resistant, vacuum degassed, of a thickness of more than 0.375 inch
299Flat-rolled product of iron or non-alloy steel, clad plated or coated with vitreous enamel, of a thickness of more than 0.375 inch
300Flat-rolled product of iron or non-alloy steel, electrogalvanized, zinc-nickel coated, HY 100, vacuum degassed, HIC resistant, of a thickness of more than 0.375 inch
301Flat-rolled product, of grade SA 516-70, clad, plated or coated with SA 240-317L stainless steel, of a thickness of more than 0.375 inch
302Flat-rolled product, Chromoly steel, of grade SA 387-11 Class 2, of a thickness of more than 0.375 inch
303Semi-finished product of other alloy steel, in ingots and other primary forms, of grades Aermet 100, 4340, CBS50NIL, 52100 or INVAR 36 Alloy, of a diameter from 1 inch to less than 8 inches
304Ingots, of other alloy steel, of specification Electro-Slag Remelting (ESR), of FINKL STEEL proprietary grade MLQ XTRA, DCQ, SDQ, SXQ, 420M, DRX or XFS, of a diameter from 40 inches to 49 inches inclusive
305Ingots, of other alloy steel, of specification Vacuum Arc Remelting (VAR), of FINKL STEEL proprietary grade MLQ XTRA, DCQ ,SDQ, SXQ , 420M, DRX or XFS, of a diameter from 40 inches to 49 inches
306Semi-finished product of stainless steel, in ingots or other primary forms, of grade 15-15HS MAX, 15-15HS or 15-5, of specification Carpenter Stainless type 15CR-5NI, Carpenter 13-8 Stainless type 410 or Custom 630 (17CR-4NI) Stainless, of a diameter from 3.5 inches to less than 8 inches
307Semi-finished product of stainless steel, of rectangular (other than square) cross-section, of grade A286, Carpenter custom 465 Stainless or Custom 450 Stainless, of specification type 17-4 or type 17-5, of a width from 7.5 inches to less than 8 inches
308Semi-finished product of stainless steel, in ingots or other primary forms, of grade 440C, Pyromet 355 High temperature alloy, 15-15LC MOD or Carpenter Disk Quality VAR 15-5, of a diameter from 1 inch to less than 8 inches
309Flat-rolled product of iron or non-alloy steel, not in coils, of grade ASTM A1011 HSLAS-F Grade 80, of a thickness from 0.059 inch to less than 0.071 inch, of a width of up to 20 inches, of a length of up to 120 inches
310Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, of grade 1045 SAE J403, of a thickness of 3.89 mm
311Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1050, of a thickness from 0.0758 inch to 0.111 inch inclusive, of a width from 6.97 inches to 10.2 inches inclusive
312Flat-rolled product, of iron or non-alloy steel, in coils, hot-rolled, pickled and oiled, annealed, of grade SAE J403 1075, of a thickness from 0.1573 inch to 0.181 inch inclusive, of a width of 5.325 inches
313Flat-rolled product of iron or non-alloy steel, in coils, cold-rolled, of grade 1074 SAE J403, of a thickness of 0.69 mm to 3.3 mm inclusive, of a width from 170 mm to 248 mm inclusive
314Pipe and tube, straight seam, electric resistance welded, of circular cross-section, of grade 1008 or 1010 steel, Galfan coated or copper plated, of specification ASTM A513, SAE J356 or SAE J526, of an outside diameter from 0.157 inch to 1.375 inches inclusive, of a wall thickness from 0.02 inch to 0.083 inch inclusive
315Flat-rolled product, of iron or non-alloy steel, in coils, galvanized, of specification ASTM A653 SS Grade 80 Class 2, of a thickness from 0.057 inch to 0.07 inch
316Semi-finished bar, of ductile cast iron, of grade 60-40-18, annealed, of specification ASTM A-395
317Flat-rolled product, hot-rolled, in coils, of grade HSLA 60, of a thickness from 0.05 inch to 0.063 inch inclusive
318Flat-rolled product, hot-rolled, in coils, of grade HSLA 70, of a thickness from 0.05 inch to 0.063 inch inclusive
319Flat-rolled product, hot-rolled, in coils, of grade HSLA 80, of a thickness from 0.05 inch to 0.063 inch inclusive
320Flat-rolled product, cold-rolled, in coils, of grade HSLA 60, of a thickness from 0.02 inch to 0.105 inch inclusive
321Flat-rolled product, cold-rolled, in coils, of grade HSLA 70, of a thickness from 0.02 inch to 0.105 inch inclusive
322Flat-rolled product, cold-rolled, in coils, of grade HSLA 80, of a thickness from 0.02 inch to 0.105 inch inclusive
323Flat-rolled product, cold-rolled, in coils, full hard, not annealed, of grade 1010, of a thickness of 0.0395 inch, of a width of 65.25 inches
324Flat-rolled product, cold-rolled, in coils, full hard, not annealed, of grade 1010, of a thickness of 0.0396 inch, of a width of 68.875 inches
325Flat-rolled product, cold-rolled, in coils, of grade 4130, of a thickness of 0.075 inch, of a width of 3 inches
326Flat-rolled product, cold-rolled, in coils, of grade 1075, of a thickness of 0.134 inch, of a width of 1.437 inches
327Flat-rolled product, cold-rolled, in coils, of grade 1050, of a thickness of 0.125 inch, of a width of 2.5 inches
328Flat-rolled product, cold-rolled, in coils, of grade 1074, of a thickness of 0.074 inch, of a width of 3.5 inches
329Round stainless steel wire, of grade 302, 304 or 316, of a diameter of more than 6.5 mm
330Square or rectangular stainless steel wire, of grade 301, 302, 304 or 631, of more than 0.787 square mm in maximum solid cross-sectional area
331Aluminum plates, sheets and strip, of alloy 1100, of any alloy of the 5000 series or of any alloy of the 6000 series
332Round bar, of other alloy steel, of grade AISI 9310 or 9310-H, fine grain, vacuum degassed, cold drawn, annealed, turned, polished, of specification AMS 6260S
333Round bar, of other alloy steel, of grade AISI 9310 or 9310-H, fine grain, vacuum degassed, cold drawn, annealed, turned, polished, of specification ASTM A108 – Level 3 or ASTM A304-11, of a diameter of more than 3.5 inches
334Vacuum Insulated Tubing (VIT), seamless, with a thermal conductivity value of less than 0.002 BTU/hr-ft-F, of an outside diameter greater than 177.8 mm, of an inside diameter from 139.7 mm to 168.3 mm inclusive
335Vacuum Insulated Tubing (VIT), Electric Resistance Welded, with a thermal conductivity value of less than 0.002 BTU/hr-ft-F, of an outside diameter greater than 177.8 mm, of an inside diameter from 139.7 mm to 168.3 mm inclusive
336Pipe and tube, of iron or non-alloy steel, seamless, of grade 1026, of specification ASTM A 519, of an outside diameter of 10 inches, of a wall thickness of 0.5 inch
337Tube, of other alloy steel, cold-drawn, seamless, of grade 4130, of specification AMS 6360, of a diameter of 0.75 inch or 1 inch, of a wall thickness of 0.035 inch or 0.156 inch
338Pipe, of carbon steel Grade B Type E, with a polymer lining of PTFE (Polytetrafluoroethylene), PVDF (Polyvinylidene), PP (Polypropylene) or PFA (Perfluoroalkoxy), of a diameter of 1 inch to 12 inches inclusive
339Round bar of stainless steel, of grade 317L, alloy 20 or alloy 2205
340Carbon wire, in coils, plastic or nylon coated, cold-formed, conforming to standard ASTM F963-07
341Plain end seamless casing, of a kind used to drill and operate gas storage caverns, of an outside diameter of 13.375 inches, of a torque of 79.67 lbs-ft or 91.25 lbs-ft, of specification P110 HC PSL-1
342Flat-rolled product, of specification GMW3032M-ST-S CR180B2 U, of a nominal thickness of 1.5 mm
343Flat rolled product, of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, of grade J2340 490XF, of a minimum thickness of 0.046 inch, of a width from 48 inches to 51 inches inclusive
344Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 490XF, of a minimum thickness of 0.055 inch, of a width of 55.51 inches.
345Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 550XF, of a thickness from 0.055 inch to 0.065 inch, of a width from 40 inches to 52 inches
346Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 550XF, of a minimum thickness of 0.068 inch, of a width of 54.675 inches
347Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade J2340 420XF, of a minimum thickness of 0.059 inch, of a width of 54.375 inches
348Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade A506 4130 FP 95% spheroidized and annealed, of a thickness from 0.154 inch to 0.157 inch, of a width from 36 inches to 39 inches inclusive
349Flat-rolled product, cold-rolled, annealed, of grade 1074 or 1075, of a thickness of 0.02 inch
350Flat-rolled product, in coils, cold-rolled, of grade 060 HSLA, of a thickness of 3 mm, of a width of up to 160 mm
351Flat-rolled product, cold-rolled, of specification GMW 3032M-ST-S-CR180B2, of a thickness of 0.0394 inch or 0.75 mm
352Flat-rolled product, cold-rolled, of specification GMW 3032M-ST-S-CR420LA, of a thickness of 0.0378 inch or 0.8 mm (+/- 0.05 mm)
353Flat-rolled product, cold-rolled, of specification GMW3032-ST-S-CR550 MPA, of a thickness of 0.0472 inch
354Flat-rolled product, cold-rolled, of specification GMW 3399W-ST-S-CR590T/340Y, of a thickness of 0.0241 inch or 0.95 mm
355Flat-rolled product, cold-rolled, of specification GMW 3399W-ST-S-CR690T/550Y, of a thickness of 0.045 inch
356Flat-rolled product, cold-rolled, of specification MS.50002 LAC420Y480T, of a thickness of 1.7 mm (+/- 0.07 mm)
357Flat-rolled product, cold-rolled, spheroidized and annealed, of grade 4130, of a minimum thickness from 0.059 inch to 0.197 inch
358Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade J2340 420XF, of a minimum thickness of 0.0394 inch, of a width of 53.328 inches
359Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3032 CR420, of a minimum thickness of 0.0433 inch, of a width of 49.575 inches
360Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3339M-ST-S 980T/700Y, of a thickness from 0.055 inch to 0.075 inch, of a width from 31 inches to 46 inches inclusive
361Flat-rolled product of non-alloy steel, not further worked than cold-rolled, of grade J2340 420XF, of a thickness of 0.0591 inch, of a width of 43.839 inches
362Flat-rolled product of non-alloy steel, cold-rolled, of grade A506 4130 FP 95% spheroidized and annealed, of a minimum thickness of 0.114 inch, of a width from 36 inches to 39 inches inclusive
363Flat rolled product of non-alloy steel, not further worked than cold-rolled, of grade J2340 490XF, of a minimum thickness of 0.035 inch, of a width of 48.4 inches
364Flat rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3032 CR340, of a minimum thickness of 0.0213 inch, of a width of 51.375 inches
365Flat rolled product of non-alloy steel, not further worked than cold-rolled, of grade GMW3032 CR340, of a minimum thickness of 0.0236 inch, of a width of 51.375 inches
366Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, in coils, containing by weight 0.19% of carbon, of specification M190 Martinsite steel, of a thickness from 0.4 mm to 0.6 mm
367Flat-rolled product of iron or non-alloy steel, of a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), in coils, of specification S50-260x431000 SAE J403-1050 or S50-260x355000 SAE J403-1050, of a thickness from 2.5 mm to 2.7 mm inclusive
368Flat-rolled product, of iron or non-alloy steel, cold-rolled, annealed, of grade 40 modified, of a thickness of 1.5 mm
369Flat-rolled product, of iron or non-alloy steel, in coils, of grade SAE J403 1055, of a thickness from 1.1 mm to 2.2 mm, of a width from 86 mm to 146 mm inclusive
370Flat-rolled product, of other alloy steel, not further worked than cold-rolled, of grade GMW3339M-ST-S 980T/550Y, of a minimum thickness of 0.049 inch, of a width from 33 inches to 59 inches inclusive
371Flat-rolled product, cold-rolled, of grade 4130, of a thickness of 0.04 inch or 0.08 inch, of a width of 36 inches
372Flat-rolled product, in coils, cold-rolled, of grade 4130, spheroidized, of a thickness of 2.5 mm, 2.9 mm or 3.5 mm, of a width from 47 mm to 153 mm inclusive
373Flat-rolled product, in coils, cold-rolled, of grade SAE J404 4130, of a thickness from 2.5 mm to 4 mm inclusive, of a width from 47 mm to 270 mm inclusive
374Flat-rolled product, cold-rolled, annealed, in coils, of grade 4140 or 4142, containing by weight 0.15% or less of chromium, containing by weight 0.05% or less of molybdenum, containing by weight 0.6% to 1.65% of manganese, of a thickness of 1.7 mm (+/- 0.08 mm), of a width from 101.5 mm to 480 mm (+/- 0.5 mm)
375Flat-rolled product, of non-alloy steel, hot-rolled, plated or coated with zinc, of grade J1392 Gr70YF or J2340 490YF, of a thickness from 0.068 inch to 0.122 inch inclusive
376Flat-rolled product, cold-rolled, in coils, nickel, brass or copper electroplated, of grade ASTM 1008, of a thickness of 0.008 inch to 0.03 inch
377Aluminum collapsible tubular container, annealed, with exterior and interior coating, produced by an impact extrusion process
378Aluminum aerosol container, annealed, with exterior and interior coating, produced by an impact extrusion process
379Flat-rolled product, cold-rolled, of specification GMW3032M CR180B2, of a nominal thickness of 0.0472 inch
380Flat-rolled product, cold-rolled, of specification GMW3032M CR210B2, of a minimum thickness of 0.081 inch
381Flat-rolled product, cold-rolled, of specification GMW3032M CR270B2, of a minimum thickness of 0.057 inch
382Flat-rolled product, cold-rolled, of specification GMW3399M CR780T/420Y, of a nominal thickness of 0.0787 inch
383Flat-rolled product, cold-rolled, of specification J404 4130, of a nominal thickness of 0.118 inch or 0.194 inch
384Flat-rolled product, cold-rolled, of specification J404 4130, of a minimum thickness of 0.059 inch, 0.138 inch or 0.1575 inch
385Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR180B2, of a minimum thickness of 0.0307 inch
386Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR340LA, of a minimum thickness of 0.03 inch
387Flat-rolled product, galvanized, of specification J2340 420XF, of a minimum thickness of 0.083 inch
388Flat-rolled product, cold-rolled, galvanized, of specification GMW3032M CR420LA, of a minimum thickness of 0.039 inch
389Flat-rolled product, hot-rolled, of specification J2340 420 XF, of a minimum thickness of 0.051 inch
390Flat-rolled product, hot-rolled, of specification J403 1037 modified, of a minimum thickness of 0.055 inch, 0.059 inch or 0.066 inch
391Flat-rolled product, hot-rolled, pickled and oiled, of specification A606 Type 4 Corten, of a minimum thickness of 0.058 inch
392Flat-rolled product, hot-rolled, pickled and oiled, of specification J2340 490XF, of a minimum thickness of 0.073 inch or 0.075 inch
393Flat-rolled product, hot-rolled, pickled and oiled, of specification GMW3032M HR550LA, of a minimum thickness of 0.078 inch
394Flat-rolled product, hot-rolled, pickled and oiled, of specification J2340 550 XF, of a minimum thickness of 0.065 inch, 0.07 inch or 0.075 inch or of a nominal thickness of 0.061 inch
Previous Version

Table of Contents

 

Date modified: