On Board Trains Occupational Health and Safety Regulations (SOR/87-184)
Full Document:
- HTMLFull Document: On Board Trains Occupational Health and Safety Regulations (Accessibility Buttons available) |
- XMLFull Document: On Board Trains Occupational Health and Safety Regulations [300 KB] |
- PDFFull Document: On Board Trains Occupational Health and Safety Regulations [638 KB]
Regulations are current to 2024-11-26 and last amended on 2023-12-15. Previous Versions
PART VIIHazardous Substances (continued)
- SOR/88-200, s. 14
- SOR/2015-143, s. 73(F)
DIVISION IIIHazardous Products (continued)
Availability of Safety Data Sheets
7.31 (1) Every employer shall, in any work place in which an employee is likely to handle or be exposed to a hazardous product, keep readily available a copy of the work place safety data sheet or the supplier safety data sheet, as the case may be, in English and in French, for examination by employees and by any policy committee, work place committee or health and safety representative.
(2) The work place safety data sheet and supplier safety data sheet shall be made available in any form, as determined in consultation with the policy committee or, if there is no policy committee, the work place committee or the health and safety representative.
- SOR/88-200, s. 12
- SOR/95-105, s. 27(F)
- SOR/2016-141, s. 31
- SOR/2019-246, s. 186
Labels
7.32 (1) Subject to sections 7.33 and 7.34, each hazardous product, other than a hazardous product referred to in paragraph 7.28(1)(c), in a work place that is intended for use in the work place and each container in which the hazardous product is contained in a work place shall, if the hazardous product or the container was received from a supplier, have applied to it a supplier label.
(2) Subject to sections 7.33, 7.34 and 7.37, if a hazardous product, other than a hazardous product referred to in paragraph 7.28(1)(c), is received from a supplier and an employer places the hazardous product in the work place in a container other than the container in which it was received from the supplier, the employer shall apply to the container a supplier label or work place label that discloses the following information:
(a) the product identifier;
(b) the hazard information in respect of the hazardous product; and
(c) a statement indicating that a safety data sheet for the hazardous product is available in the work place.
(3) Subject to sections 7.36 and 7.37, no person shall remove, deface, modify or alter the supplier label applied to
(a) a hazardous product that is in the work place; or
(b) the container of a hazardous product that is in the work place.
- SOR/88-200, s. 12
- SOR/95-105, s. 28
- SOR/2016-141, s. 31
Portable Containers
7.33 Where an employer stores a hazardous product in the work place in a container that has applied to it a supplier label or a work place label, a portable container filled from that container does not have to be labelled in accordance with section 7.32 if
(a) the hazardous product is required for immediate use; or
(b) the following conditions apply in respect of the hazardous product:
(i) it is under the control of and used exclusively by the employee who filled the portable container,
(ii) it is used only during the work shift in which the portable container was filled, and
(iii) it is clearly identified by a work place label applied to the portable container that discloses the product identifier.
- SOR/88-200, s. 12
- SOR/2016-141, s. 32
Special Cases
7.34 An employer shall, in a conspicuous place near a hazardous product, post a sign in respect of the hazardous product that discloses the product identifier if the hazardous product is
(a) in a bulk shipment that is not placed in a container at the work place; or
(b) not in a container and stored in bulk.
- SOR/88-200, s. 12
- SOR/2016-141, s. 33
Signs
7.35 The information disclosed on a sign referred to in section 7.34 or paragraph 7.38(b) shall be of such a size that it is clearly legible to the employees in the work place.
- SOR/88-200, s. 12
Replacing Labels
7.36 (1) If, in a work place, a label applied to a hazardous product or the container of a hazardous product becomes illegible or is removed from the hazardous product or the container, the employer shall replace the label with a work place label that discloses the following information:
(a) the product identifier;
(b) the hazard information in respect of the hazardous product; and
(c) a statement indicating that a safety data sheet for the hazardous product is available in the work place.
(2) An employer shall review the accuracy of the information on a work place label and update it as soon as feasible after new hazard information or significant new data becomes available to the employer.
- SOR/88-200, s. 12
- SOR/95-105, s. 29(F)
- SOR/2016-141, s. 34
- SOR/2019-246, s. 187(E)
Exemptions from Disclosure
7.37 (1) Subject to subsection (2), if an employer has filed a claim for exemption from the requirement to disclose information on a safety data sheet or on a label under subsection 11(2) of the Hazardous Materials Information Review Act, the employer shall disclose, in place of the information that the employer is exempt from disclosing,
(a) if there is no final disposition of the proceedings in relation to the claim, the date on which the claim for exemption was filed and the registry number assigned to the claim under section 10 of the Hazardous Materials Information Review Regulations; and
(b) if the final disposition of the proceedings in relation to the claim is that the claim is valid, a statement that an exemption has been granted and the date on which the exemption was granted.
(2) If a claim for exemption is in respect of a product identifier, the employer shall, on the safety data sheet or label of the hazardous product, disclose, in place of that product identifier, a code name or code number specified by the employer as the product identifier for that hazardous product.
- SOR/88-200, s. 12
- SOR/95-105, s. 30(F)
- SOR/2016-141, s. 34
Hazardous Waste
7.38 (1) If a hazardous product in the work place is hazardous waste, the employer shall disclose the generic name and hazard information in respect of the hazardous product by
(a) applying a label to the hazardous waste or its container; or
(b) posting a sign in a conspicuous place near the hazardous waste or its container.
(2) The employer shall provide education and training to employees regarding the safe storage and handling of hazardous waste that is found in the work place.
- SOR/88-200, s. 12
- SOR/2016-141, s. 34
Information Required in a Medical Emergency
7.39 For the purposes of subsection 125.2(1) of the Act, a medical professional is a nurse who is registered or licensed under the laws of a province.
- SOR/88-200, s. 12
- SOR/95-105, s. 31
- SOR/2019-246, s. 188
DIVISION IV[Repealed, SOR/95-105, s. 32]
PART VIIISafety Materials, Equipment, Devices and Clothing
8.1 [Repealed, SOR/2015-143, s. 40]
General
8.2 Every person granted access to the work place who is exposed to a health or safety hazard in a work place shall use the protection equipment prescribed by this Part, if
(a) it is not feasible to eliminate that hazard or to control it within safe limits, and
(b) the use of protection equipment may prevent or reduce injury from that hazard.
- SOR/95-105, s. 33(F)
- SOR/2015-143, s. 72
- SOR/2019-246, s. 189
8.3 All protection equipment
(a) shall be designed to protect the person from the hazard for which it is provided; and
(b) shall not in itself create a hazard.
8.4 All protection equipment provided by the employer shall
(a) be maintained, inspected and tested by a qualified person; and
(b) where necessary to prevent a health hazard, be maintained in a clean and sanitary condition by a qualified person.
Protective Headwear
8.5 If there is a hazard of head injury in a work place, protective headwear that meets the standards set out in CSA Standard CAN/CSA-Z94.1-05, Industrial Protective Headwear – Performance, Selection, Care, and Use, as amended from time to time, shall be used.
- SOR/95-105, s. 61(F)
- SOR/2015-143, s. 41
Protective Footwear
8.6 (1) If there is a hazard of foot injury or electric shock through footwear in a work place, protective footwear that meets either the standards set out in CSA Standard CAN/CSA-Z195-09, Protective Footwear, as amended from time to time, or the standards set out in the American Society for Testing and Materials publication F2413-05, entitled Standard Specification for Performance Requirements for Foot Protection, dated 2005, shall be used.
(2) Where there is a hazard of slipping in a work place, non-slip footwear shall be used.
- SOR/95-105, s. 61(F)
- SOR/2015-143, s. 42
Eye and Face Protection
8.7 If there is a hazard of injury to the eyes or face of an employee in a work place, the employer shall provide the employee with an eye or face protector that meets the standards set out in CSA Standard CAN/CSA-Z94.3-07, Eye and Face Protectors, as amended from time to time.
- SOR/95-105, s. 34
- SOR/2015-143, s. 43
Respiratory Protection
8.8 (1) If there is a risk of injury or disease due to exposure to an oxygen deficient atmosphere in a work place, the employer shall provide every person who is granted access to the work place with respiratory protective equipment by means of which air will be supplied and that meets the following requirements:
(a) it is listed in the United States National Institute for Occupational Safety and Health publication entitled Certified Equipment List, as amended from time to time; and
(b) it protects the respiratory tract against the oxygen deficiency.
(2) If there is a risk of injury or disease due to exposure to an airborne hazardous substance in a work place, the employer shall provide every person who is granted access to the work place with respiratory protective equipment that meets the following requirements:
(a) if air is supplied by means of the respiratory protective equipment, it is listed in the United States National Institute for Occupational Safety and Health publication entitled Certified Equipment List, as amended from time to time;
(b) if air is not supplied by means of the respiratory protective equipment, it is listed
(i) in the United States National Institute for Occupational Safety and Health publication entitled Certified Equipment List, as amended from time to time, or
(ii) in the CSA Group publication entitled CSA Group Product Listing, as amended from time to time;
(c) for respiratory protective equipment referred to in subparagraph (b)(ii), it meets the requirements set out in CSA Standard Z94.4.1, Performance of filtering respirators, as amended from time to time; and
(d) it protects the respiratory tract against the hazardous substance.
(3) The respiratory protective equipment referred to in subsection (1) or (2) shall be selected, fitted, cared for, used and maintained in accordance with CSA Standard Z94.4, Selection, use, and care of respirators, as amended from time to time.
(4) The employer must ensure that the air that is supplied by means of respiratory protective equipment referred to in paragraph (1)(a) or (2)(a), and the system that supplies the air, including its cylinders, meets the requirements set out in CSA Standard Z180.1, Compressed breathing air and systems, as amended from time to time.
- SOR/88-200, s. 14. SOR/95-105, ss. 35, 61(F)
- SOR/2015-143, s. 43
- SOR/2021-140, s. 3
- SOR/2022-94, s. 6
- Date modified: